| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 4 x | Tube Pitot to PIXHAWK |
| 2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 3 x | PIX Hawk with accesories |
| 2 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 6 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 2 x | Digital scale up to 40 kg |
| 2 x | Screwdriver for Torx® TX8 |
| 2 x | Starter EM Gear Power 80 |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 2 x | 2,0x50 mm allen screwdriver |
| 1 x | 3,0x60 mm allen screwdriver |
| 3 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Dust collector for mould cleaning |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | |
| 2 x | |
| 1 x | Z Bender - S Type Tool |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | |
| 1 x | Cinta Goldfix 1m |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Spikes Band (5 m) |
| 1 x | 20x200 mm battery rings |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | Propeller POWER-PROP 15x8 |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | Porpeller HUNTER 400 |
| 2 x | Propeller POWER-PROP 12x6 |
| 1 x | Porpeller HUNTER 480 |
| 1 x | Propeller POWER-PROP 12x9 |
| 1 x | Propeller POWER-PROP 14x9 |
| 1 x | Propeller electric carbon 10.5x8 |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | Propeller POWER-PROP 13x9 |
| 2 x | Propeller POWER-PROP 10x7 Izda |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Propeller electric carbon 8.5x5 |
| 1 x | Propeller POWER-PROP 11x9 |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | Propeller POWER-PROP 16x10 |
| 1 x | Propeller POWER-PROP 14x10 |
| 1 x | Propeller electric carbon 10.5x7 |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Cooler motor type 400 |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | White smoke canister 100 g |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 2 x | PPM Encoder Module |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
| 1 x | Hot Glue Stick GREEN |
| 2 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | Fresa corte diamante Ø 2.7mm (bola) |
| 1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
| 2 x | Ball Link Plier |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | Screwdriver for Torx® TX6 |
| 2 x | Sealing Iron STANDARD |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | 25 mm Sandpaper file |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Sub-D Plug Mold |
| 1 x | Starter EM Gear Power 250 |
| 1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
| 1 x | Crimping tool |
| 1 x | Motor mount VANQUIST 48" F3A |
| 1 x | Vacuum pump P1-N |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | TMM 2512-3S heli |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
| 2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 2 x | Copier 2x20 cm pcs |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 2 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Schul-Malpinsel Gr.5 |
| 1 x | Ball Link Plier |
| 1 x | Rubber Insert hard, 1 Pcs. |
| 1 x | EC-Cutter |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 2 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 2 x | Piloto JET 1:3,5 |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 2 x | Styrene plate 320x120x0.5 mm |
| 2 x | Foam plastic plates (310x210x5 mm) |
| 2 x | PVC grid straight 290x185x0.32 mm |
| 2 x | Film release agent PVA 25 ml |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 2 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Gold antispark 4 mm plug |
| 1 x | Optotronix Aurora Plug |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 2 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 2 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 2 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | MPX Sub-D Adaptor |
| 2 x | XH male balance (4S) connector (2 pcs) |
| 2 x | XH female balance (3S) connector (2 pcs) |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 3 x | Conector BEC female (10 pcs) |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 2 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | cable TexY |
| 1 x | ESC YGE 90 HV F3A |
| 1 x | Esc X-70-OPTO-Pro |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Esc MasterSPIN 66 Pro |
| 1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
| 1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
| 1 x | Bidule 111 3000 mm |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Adaptador USB - YGE |
| 1 x | ESC YGE 8 S |
| 1 x | Esc X-70-SB-Pro 2-6S |
| 1 x | Esc MasterBasic 90 Opto |
| 1 x | Program card KAVAN PRO |
| 1 x | Esc master MEZON 120 Lite |
| 1 x | EDGE 540-A 105" (2660 mm) |
| 1 x | Tool for entel |
| 1 x | Bidule 55 2460 mm Cabina |
| 1 x | Tool for entel |
| 1 x | EXTRA 300 78" V3 Yellow/Red/Blue |
| 1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
| 1 x | ULTRA STICK 10 cc ARF |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | PILATUS PC-6 Turbo Porter 33% 5.290 mm |
| 1 x | Mold plugs XT-30 |
| 1 x | SLICK 360-B 104" (2640 mm) |
| 1 x | Epoxy 5 min. 200g |
| 1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Motor mount class 48" |
| 1 x | Epoxy 5 min. 500 g (Hardener) |
| 1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | EXTRA 330SC-E 95" Orange/Blue/White |
| 1 x | MPX 8 pins plug mold |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Hot Glue Stick RED |
| 1 x | Universal Filter |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | 1/6 Pilot "John" |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
| 1 x | Fiberglass plate 620x540x2,0 mm |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Fiberglass plate 620x540x1,0 mm |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
| 1 x | Silicone black 4,0 qmm wire (25 m) |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Conector JR Servo male (50 pcs) |
| 1 x | Conector FUTABA Servo female (10 pcs) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | MPX Support (2 pcs) |
| 1 x | XT-30 connector (pair) |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Prop rubber XS set 4 pieces |
| 1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
| 1 x | F-16 Scale 1:6 Camuflaje Grey (1.630mm) |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | F-16 Scale 1:6 (1.630mm) |
| 1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
| 1 x | F9F COUGAR Grey ARF 1.562 mm |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
| 1 x | Colormatic 2K Soft fine putty white, 1 kg |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | Conector FUTABA Servo male (10 pcs) |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | XH female balance (9S) connector (2 pcs) |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | PIN Connector female (100 pcs) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
| 1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Fiberglass 5000x1100 mm 49 g/m² |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | L-39 Albatros Scale 1:4.75 1991 mm |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | F4U CORSAIR MARINES 2360 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | F4U CORSAIR 2360 mm |
 |
| 39,001.47EUR |
