| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Landing gear axle 4x21 4 mm (2 uds) |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 2 x | Motor A2212/13T |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Crimping tool |
| 2 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Ball Link Plier |
| 2 x | Cap closure 33/23.5mm (2 uds) |
| 2 x | Ball Link Plier |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Crimping tool |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 4 x | 2,0x50 mm allen screwdriver |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Screwdriver for Torx® TX6 |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 2 x | Covered closure or fairings |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | TrainerCord (master-learner) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Premium servo extension 75cm |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Angle support XT60 conector |
| 2 x | Support FUEL DOT V3 |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 2 x | 2,3 mm Prop Adapter M5 |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Servo HITEC D954 TW |
| 1 x | Servo HITEC HS-5245 MG Digi |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
| 1 x | Servo HITEC HS-125 MG |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Silicone red 1,5 qmm wire ( 1 m) |
| 1 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | Silicone red 0,75 qmm wire ( 1 m) |
| 1 x | Propeller APC 12x8 Electric |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Dust collector for mould cleaning |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Mini Lock Grips 2PCS |
| 1 x | Heli digital angle measurer |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | 3,2 mm Prop Adapter M5 |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | Canopy Latch |
| 1 x | 45 mm rods set for direction control |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 1 x | One touch canopy lock |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 1 x | EXTRA NG 85" 2159mm yellow/blue |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Suncover 100cc Red |
| 1 x | SLICK 360-B 104" (2640 mm) |
| 1 x | EDGE 540-A 105" (2660 mm) |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
| 1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
| 1 x | Antonov AN2 Scale 1/6 - 3m |
| 1 x | Lipo GENS 200 mAh 1s 3.7 45C (2 pcs) |
| 1 x | Esc MasterBasic 90 Opto |
| 1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
| 1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
| 2 x | Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case) |
| 1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace) |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace) |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 2 x | Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace) |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | Esc master MEZON 120 Lite |
| 1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
| 1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
| 2 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace) |
| 1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
| 1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
| 1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Battery charging cable XT60 |
| 1 x | BOOMERANG II 40/46 ARF 1.55mm |
| 1 x | PARAGON Trainer 46-55 1580 mm |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | 270 mm 3/3 mm shaft ship |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Propeller APC 13x6.5 Electric Pusher |
| 1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
| 1 x | Cut tube |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | 290 mm M5 Prop shaft |
 |
| 12,120.76EUR |
