2 x | DYNAMOMETER S-1580 |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | 3 LiPo XH>EH adapter |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Motor ACTRO 50-2-760 |
1 x | Screws M1,6x6 Allen |
1 x | Cierva C30 simulated motor |
1 x | Head lower part New |
1 x | Balls 4 mm |
2 x | Bearing 3x6x2,5 |
1 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Blade holder lower |
1 x | Rotorshape Autogyro |
1 x | Cotton Flocks, bag/ 7 Kg |
2 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
2 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Gates hinge |
2 x | Indoor hinge with servo arm integraded |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Deposito SECRAFT V2 1000 ml Gas |
1 x | Double side nipple |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | LightBox SR |
1 x | USB Interface Adapter |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Fox MDM 1 4000 mm Std. |
1 x | Fournier RF-4D |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | 280 cc gasoline fuel tank complet |
1 x | 18m Fitting barb |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Junta humo metalica G35 DLE35 |
1 x | |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | Deposito DUBRO 360 ml - 12 oz |
2 x | Cierva C30 spanish decoration Stickers |
1 x | Propeller AERO-NAUT M4 60 mm (3 Blades pr) (Right hydropropeller |
1 x | Screw M3x16 |
1 x | Nut M2 securing |
1 x | Cierva C30 Body Spain |
1 x | Blade holder center |
1 x | Screws flush mount M2 |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | Blade holder upper |
1 x | Ball joint long |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | EME 55 cc carburetor WALBRO |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Electric Fuel Pump 12V |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Optical RPM Sensor |
1 x | Long pinned hinge (6 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Smoke pump RCEXL |
1 x | Servo Dymond D 37 Eco |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Aluminium ignition bad (red) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | 10 mm gas motor standoff |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | XT-60 connector (male) |
1 x | Connectors DEANS (T) micro |
1 x | Conector Servo female 4 pines |
1 x | Conector XT-30 (hembra) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Central support Speed 280 |
1 x | Cooler motor type 150 |
1 x | Frontal support Speed 280 |
1 x | Frontal support Speed 600 |
1 x | Metalic motor holder for class 550-600 |
|
5,881.50EUR |