| 3 x | Small Crow DLE-170M |
| 3 x | Motor DLE 170 M- Paramotors |
| 3 x | Silent-blocks DLE 170M |
| 4 x | Big Crow DLE-170M |
| 3 x | Motor DLE 430 cc - Paramotors |
| 3 x | Motor DLE 200cc Std |
| 4 x | Motor DLE 200cc Premium Muffler |
| 1 x | Motor A2212/13T |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 2 x | Nut M2 |
| 1 x | Liferaft 47 mm |
| 1 x | Ancla 40 x 24 mm (2 pcs) |
| 1 x | Regulador NAVY 540R |
| 1 x | ROOKIE 20Amp (25) A controller |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | LA500 nose |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Dust collector for mould cleaning |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | Futaba Prop Module F14 |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Inlet lip (carbon) Stream-Fan 110 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | DUPLEX RC Droid Box - DC/DS |
| 1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Canopy Latch |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Receiver bed (Blue) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Long ball link M3 (6 uds) |
| 1 x | Switch Cap L (black) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 2 x | Switch Cap L (Red) |
| 2 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | DUPLEX R7 receiver 2,4GHz |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | TX 250 mW especial GOPRO |
| 1 x | Tank GFK Opus/JEt 300 ml |
| 1 x | 2 mm Prop Adapter M6 |
| 1 x | 11x7 tree blades propeller |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 16x10 tree blades propeller Master Airscrew |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | 25 mm fenders (10 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | DUPLEX R6G indoor receiver 2,4GHz |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | AIRSPEED SENSOR SBS01TAS |
| 1 x | Receiver DUPLEX REX 3 2.4 GHz |
| 1 x | Jeti Black cap |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | |
| 1 x | VARIO module Hott |
| 1 x | Receptor DUPLEX REX R9 Slim |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | GPS, Vario and altitude Sensor SBS-01G |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 2 x | Propeller balancer |
| 1 x | Battery FUTABA 18MZ |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Neck strap Double V2 |
| 1 x | Charger FUTABA SQN30W12P-08 220v |
| 2 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Horn with ball 40x30 |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | DUPLEX R14 receiver 2,4GHz |
| 1 x | Futaba Radio Case |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | Battery voltage telemetry |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Field folding model stand |
| 1 x | Metal hook for loading arm, 9mm high, 10 pcs |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Propeller POWER-PROP 12x6 |
| 1 x | Porpeller HUNTER 400 |
| 1 x | Propeller electric carbon 8.5x5 |
| 1 x | 6x4 tree blades propeller |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Bungee HLG Premium |
| 1 x | 3,2 mm Prop Adapter M8 |
| 1 x | Vacuum pump 12 CFM |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | Copier 2x20 cm pcs |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | SCHARNHORST Battleship 1:200 |
| 1 x | Esc X-55-SB-Pro |
| 1 x | ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A |
| 1 x | 5 mm Prop Adapter M8 |
| 2 x | 6 mm Prop Adapter M8 |
| 1 x | 40 mm black plastic spinner for fixed propeller |
| 1 x | 42 mm white plastic spinner for fixed propeller |
| 1 x | 42,0 mm propeller (left propeller) |
| 1 x | 36,0 mm propeller (rigth propeller) |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | 36 mm white plastic spinner for fixed propeller |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | 50 mm white plastic spinner for fixed propeller |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Pendulun "Special" to tank 60g |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Jeti Box mini |
| 1 x | Futaba Aero Large Case - Internal Foam |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | PROFI Box JETI |
| 1 x | Rocket D9-7 |
| 1 x | Switch Cap L (silver) |
| 1 x | Switch Cap M (black) |
| 1 x | Transmitter Stick Ends V2 Red - M3 (2 pcs) |
| 1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
| 1 x | Teacher-student connector T12FG/FX-30 |
| 1 x | Transmitter Balancer SPK DX-8 |
| 1 x | Tray for FUTABA 14SG/16SZ |
| 1 x | Switch Cap L (Blue) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Crimping tool |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | PIX Hawk with accesories |
 |
| 48,895.38EUR |
