| 2 x | Motor A2212/13T |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Towing hook <3m |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | CC 03 |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 25 mm reinforced hinge |
| 2 x | Connector CAN 15 |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | |
| 4 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 2 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | Oratex Natural White 2m |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Kit wheel loader 966G II without electrics, without hydrauli |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 2 x | Digital Air Speed Sensor And Pitot Tube Set |
| 2 x | Conector BEC female (10 pcs) |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 3 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Optotronix Aurora Plug |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 3 x | ABS tube 6.0x5.0x1000 mm |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Oratex Silver 2m |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | 1/6 Pilot "John" |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 2 x | Ball link M2,5 (10 pcs) |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Tape GFK 38 mm |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Dust collector for mould cleaning |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Cut tube |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | EC-Cutter |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Spikes Band (5 m) |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | Crimping tool |
| 1 x | Tape GFK 25 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 2 x | ABS tube 3.0x2.0x330 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 2 x | ABS tube 5.0x4.0x156 mm |
| 1 x | MPX Sub-D Adaptor |
| 1 x | XH LiPo extension lead |
| 2 x | XH female balance (5S) connector (2 pcs) |
| 1 x | MPX Support |
| 2 x | XT60 Connector with Holder Male 2pcs |
| 2 x | MR30 connector female |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 2 x | EasyFLY Addon |
| 2 x | Slave-cable USB Easy Sim |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 2 x | ABS tube 20.0x18.0x1000 mm |
| 3 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 2 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 2 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 2 x | ABS tube 16.0x14.0x1000 mm |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 2 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 2 x | Wing connector 8pin with pin strip, plug & socket |
| 2 x | Red 4 mm connector holder |
| 1 x | XT-60 connector (female) |
| 1 x | Servo Connector Brackets (10 pcs) |
| 1 x | XH male balance (9S) connector (2 pcs) |
| 1 x | Soporte carbono MR30 (2 pcs) |
| 1 x | Protector Connector Dean-T (1 pair) |
| 1 x | XH female balance (7S) connector (2 pcs) |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 2 x | XT-30 connector (pair) |
| 1 x | XT-90 connector (pair) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | PIX Hawk with accesories |
| 2 x | Universal batery Tester |
| 1 x | XH male balance (6S) connector (2 pcs) |
| 2 x | Soldering PCBs 8pin, 5 pieces |
| 2 x | XH male balance (8S) connector (2 pcs) |
| 2 x | XT-60 connector (male) |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | XH male balance (7S) connector (2 pcs) |
| 2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | BABY glider (Aero-naut) |
| 2 x | XH male balance (2S) connector (2 pcs) |
| 1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | X-RAY Micro QR |
| 1 x | E-FUN BUG (ROI-Import) |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | DINO Glider ARC |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | Glider IKARUS |
| 1 x | GPS Altis |
| 2 x | Device Terminal |
| 1 x | Keypad ALTIS V4 |
| 1 x | MultiLog Altimeter |
| 1 x | Contacto macho pin conector (10 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | DUPLEX 2.4EX MUI 150 Sensor |
| 1 x | Crystal RX 35.020 Ch 62 |
| 2 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | LA500 rotor head core |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | LA500 pre-rotation gear |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 2 x | Conector XT-30 (hembra) |
| 1 x | Screws of the Back Cover for DC Tx (10pcs.) |
| 1 x | Transmitter JETI Duplex DC-16 II YELLOW Carbon Line Mod.2 |
| 1 x | Piston ring for DA-150 |
| 1 x | Tx JETI Duplex DC-24 II Carbon Line Ruby |
| 1 x | Piston ring for ZG 20 and G240RC |
| 1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
| 1 x | Harness for transmitter JETI DUPLEX |
| 1 x | Switch Button DS Tx DUPLEX |
| 1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Compact Pitts Muffler OS MAX.35.40 FP |
| 1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
| 1 x | Emisora FUTABA T18 SZ + R7208SB |
| 1 x | PowerBox Battery 4000 |
| 1 x | Battlife Guard 2s |
| 1 x | BlueCom™ Adapter (iOS) |
| 1 x | Compact on-board starting system (9713) |
| 1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
| 1 x | Telemetry interface ALTIS 12 cm |
| 1 x | USB interface ALTIS |
| 1 x | Telemetry interface ALTIS 20 cm |
| 1 x | MPX screwable clips (4 pcs) |
| 1 x | Protector Connector MPX (1 pair) |
| 1 x | Crystal RX 35.030 Ch 63 |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
| 1 x | DUPLEX 2.4EX RC Power Switch 10 |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | GameCommander USB Universal |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | LA500 rotor head shaft |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | |
| 1 x | Release wax 250ml |
| 1 x | CA Glue fast 20g |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
| 2 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 2 x | DSM 10 Dual Switch Mixer |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | Tufnol Choke Lever Arm d=4,7mm |
| 1 x | Transmitter JETI Duplex DS-12 EX Multimod RED |
| 1 x | Hand Pads for Tray JETI |
| 1 x | Cylinder ZG 26SC/SLH |
| 1 x | Transmitter JETI Duplex DS-12 SE Carbon RED |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | JETI transmitter DC-14 II Green Multimode |
| 1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
| 1 x | Stick largo JETI DC/DS (2 pcs) |
| 1 x | DC24 II Transmitter case insert |
| 1 x | JETI transmitter DC-14 II Blue Multimode |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
| 1 x | JETI handheld transmitter DS-14 II Green Multimode |
| 1 x | Spring Clip Ø25 mm |
| 1 x | switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX |
| 1 x | Connectors MPX female |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | PowerBox PowerExpander SRS |
| 1 x | Brake for 140 mm wheels |
| 1 x | Transmitter Crystal 35 Mc/s Ch 77 |
| 1 x | Compact on-board starting system (9724) |
| 1 x | Servo holder for retract |
| 1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
| 1 x | PowerBox Signal Amplifier |
| 1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
| 1 x | Altimeter Altis NAO |
| 1 x | Telemetry interface ALTIS 6 cm |
| 1 x | Wing conexion 2 servos JR/Graupner 50 cm |
| 1 x | Set Altimeter SHRead |
| 1 x | MPX PCB "6 Pins", 5 pieces |
| 1 x | DC Small for MultiLog & UltraLight |
| 1 x | Wing conexion 2 servos Futaba 50 cm |
| 1 x | Crystal RX 35.050 Ch 65 |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 2 x | Caps multicolor Switch JETI |
| 1 x | Crystal RX 35.140 Ch 74 |
| 1 x | DUPLEX 2.4 EX MVario2 |
| 1 x | DUPLEX 2,4GHz MRPM EX |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
| 1 x | Micro Crystal RX 35.070 Ch 67 |
| 1 x | Neck strap JETI DC |
| 1 x | MZ-18, 9 Channel HoTT |
| 1 x | Micro Crystal RX 35.080 Ch 68 |
| 1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
| 1 x | DUPLEX 2,4GHz MRPM-AC EX |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | Interface Realflight Simulator |
| 1 x | Blade Holder Full (4 blades) |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | 4 blades set |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | LA500 cyclic central part |
| 1 x | Pilot LA 500 |
| 1 x | LA500 tail empennage |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | LA500 freewheel bearing |
| 1 x | LA500 housing-lower cyclic |
| 1 x | LA500 ciclic lever |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Digital scale up to 40 kg |
| 1 x | LA500 pre-rotation gear hub |
| 1 x | LA500 nose |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Motor rotor LA-500 |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | LA500 front gear holder |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | LA500 Blades |
| 1 x | LA500 housing-upper cyclic |
| 1 x | CA Glue (medium) 20g |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 3 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 2 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 2 x | Conector JR Servo female (10 pcs) |
| 2 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Conector Servo female 4 pines |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
| 1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
| 1 x | Conector FUTABA Servo male (10 pcs) |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Bag connector 2 mm |
| 2 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Connectors DEANS (T) |
| 1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 2 x | 30 cm DEANS female connector |
| 1 x | Conector FUTABA Servo female (10 pcs) |
| 2 x | Conector XT-30 (macho) |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 2 x | Conector JR Servo male (10 pcs) |
| 1 x | MR30 connector male |
| 1 x | Cylinder for ZG20 |
| 1 x | JETI Counter for DC-24 Carbon Design 3 |
| 1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Multimode |
| 1 x | DUPLEX case for Jeti DS handheld transmitter |
| 1 x | Carburetor for ZG45SL and ZG62/S/SL |
| 1 x | Tx JETI Duplex DC-24 II Carbon Line Gray |
| 1 x | Covered closure or fairings |
| 1 x | Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX |
| 1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
| 1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
| 1 x | Connectors MPX male |
| 1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
| 1 x | EnLink 2RS Plus - DUO |
| 1 x | 30 cm MULTIPLEX female connector |
| 1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
| 1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
| 1 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
| 1 x | JETI Counter for DC-16 (Blue) |
| 1 x | XH female balance (8S) connector (2 pcs) |
 |
| 35,081.67EUR |
