| 1 x | Copier 5x20 cm pcs |
| 1 x | Dust collector for mould cleaning |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Servo inverter |
| 1 x | Servo inverter |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | Oracover Black 2 m |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 2 x | Round Rod 3,0x1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Alu servo arm double RHINO |
| 2 x | Strip 3,5x1,75x330 mm |
| 1 x | Futaba S9650/9670SV - Upper Case |
| 1 x | Servo safety connector (10 pcs) |
| 1 x | HITEC 20 mm servo arm with ball link |
| 1 x | Servo FUTABA S 9670 SV |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 1 x | Servo FUTABA SBL 471 SV |
| 2 x | Round Rod 1,0x1000 mm |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | L-shaped servo mount |
| 2 x | Carbon fiber rod 0.8 mmx1000 mm |
| 2 x | Strip 2,5x1,25x330 mm |
| 1 x | CC 05 |
| 2 x | "S" set for planes |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 2 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
| 1 x | Smoke set "M" |
| 3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | BALSA triangular 8x8x1000 mm |
| 2 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | Green smoke canister 100 g |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | "M" set |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Gear set HITEC HS-125MG/5125MG |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 2 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | White smoke canister 140 g |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Horns set HS-65HB/MG, 5065MG |
| 1 x | Servos security connector (2 pcs) |
| 1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | LiPo Storage Box Type "BIG" |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | Shirt Hispano Aviación |
| 1 x | X-RAY Micro QR (Tail Tube) |
| 1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
| 1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
| 1 x | Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case) |
| 1 x | Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace) |
| 1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
| 2 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
| 1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 2 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | DPSI Micro - RCS |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | OPTOTRONIX Aurora LCU |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | Conector XT-30 (hembra) |
| 1 x | PSC 6 |
| 1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
| 1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 2 x | Carbon fiber rod 6.0 mmx1000 mm |
| 2 x | Round Rod 2,0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | ABS I Strip 10x5x1000 mm |
| 2 x | Strip 1,5x1,5x330 mm |
| 2 x | Round Rod 1,5x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 2 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 3 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 2 x | Carbon fiber rod 16 mm x 1000 mm |
| 3 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 2 x | Interface Realflight Simulator |
| 1 x | Interface Jack Adapter IKARUS |
| 2 x | SIMtransmitter 6 Mode 2 |
| 2 x | EasyFLY Addon |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Extension 5 lipos JST/C |
| 1 x | DPSI RV Mini 6 (2008) |
| 1 x | Conector MT-60 (pair) |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Extension 5 lipos JST/C - JST |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | DPSI Micro - RCS RV |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | USB interface ALTIS |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Conector FUTABA Servo male (10 pcs) |
| 1 x | SPS Remote switch actuator |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | DPSI V-Match |
| 1 x | Filter Capacitor JR |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | DPSI Ampere & Voltage bundle |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Conector FUTABA Servo female (10 pcs) |
| 1 x | Long Switch On/Off micro |
| 1 x | Servo-V-Limiter 5.2V |
| 1 x | SPS 70V 100/200 A |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Parachutist |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Remote electric ignition system |
| 1 x | 2,3 mm Prop Adapter M5 |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | Servos wing assembly set HS 80/81/82/85 |
| 1 x | 25 mm carbon servo arm |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
| 1 x | Servo arms set HS-65HB/MG/5065MG |
| 1 x | LiPo Storage Box Type "P" |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | Ball link M3 (6 uds) |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | Battery LiPo TATTU 2300 mAh 4S 14,8V 45C |
| 1 x | Battery Lipo TATTU 750 mAh 4S 14.8v 95C R-Line |
| 1 x | Lipo GENS 200 mAh 1s 3.7 45C (2 pcs) |
| 1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
| 1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Spare Part Frame Set for EACHINE RACER 250 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Servo HITEC HS-85 MG |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
| 1 x | XT-90 connector (pair) |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
| 1 x | XH male balance (8S) connector (2 pcs) |
| 1 x | TMM 1210-3S heli |
| 2 x | 30 cm BEC cable (male) |
| 1 x | Magnetic Connect locking system |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Servo KST X08 Plus 9g HV servo |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | TMM 2512-3S heli |
| 1 x | Battery charging cable XT60 |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 2 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | DPSI Ampere battery backer |
| 1 x | Cabling for Fox MDM1 wings |
| 2 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | TrainerCord (master-learner) |
| 1 x | Red 4 mm connector holder |
| 1 x | MR30 connector female |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
| 1 x | XT-60 connector (female) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Futaba 52 mm servo arm |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Connector CAN 15 |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Vasa model Catapult |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Optical RPM Sensor |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Blind nut M3 (4 pcs) |
| 1 x | Suncover 100cc Red |
 |
| 11,077.37EUR |
