| 1 x | Glases Nimbus "Black" |
| 2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 2 x | Glases Aspen |
| 1 x | Glases Nimbus |
| 1 x | Glases Stratus |
| 2 x | Oratex Red Fokker 10 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Ply-Span 450x600/13g Yellow |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Oracover White 2 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 2 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 2 x | Starter EM Gear Power 80 |
| 1 x | Digital scale up to 40 kg |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Hot Glue Stick RED |
| 1 x | Z Bender - S Type Tool |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Vacuum pump P1-N |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Covered closure or fairings |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 2 x | Slave-cable USB Easy Sim |
| 1 x | One touch canopy lock |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Interface Realflight Simulator |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Canopy Latch |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Servo NARO Max Std |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | 1/6 Pilot "John" |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Tail boom |
| 1 x | Screw M3x16 |
| 1 x | LA500 rotor head core |
| 1 x | Head lower part |
| 1 x | Complet landing gear |
| 1 x | Cierva C30 simulated motor |
| 1 x | Glases Innovation Plus |
| 1 x | Glases Moritz |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | GameCommander USB Universal |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | resin-hardener L-385 H-385 (1250 g) |
| 2 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | PVC grid straight 290x185x0.32 mm |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Oracover Black 2 m |
| 2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Glases Ace |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | Hardener P-25, canister 2.5Kg |
| 1 x | Mould Resin P 10 kg |
| 1 x | Oratex Natural White 20m |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Oracover Azul 2 m |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Oracover Red 2 m |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Oracover White 10 m |
| 1 x | Dust collector for mould cleaning |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 3 x | GRAFAS MAXI ARF |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Mold plugs XT-90 |
| 1 x | Ball Link Plier |
| 1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Heli blades angle measurer |
| 2 x | PVC yellow battery termo-retract 69 mm (10 m) |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
| 2 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 2 x | Catalog AERO-NAUT 2016 |
| 1 x | Ball Link Plier |
| 1 x | Mini-handed clamp |
| 1 x | PVC lilac battery termo-retract 70 mm (10 m) |
| 2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
| 1 x | Mold plugs XT-30 |
| 2 x | Solarfilm Lite blue transp. 5m |
| 1 x | PVC transparent battery termo-retract 195 mm (1 m) |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Heli digital angle measurer |
| 1 x | Oracover Yellow CADMIO 2 m |
| 1 x | 1,5x50 mm allen screwdriver |
| 2 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Bird (Aero-naut) |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | 100 mm rods set for direction control |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | LA500 housing-lower cyclic |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | 2,3 mm Prop Adapter M5 |
| 1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Adapter 3,2 mm M6 |
| 1 x | Adapter 3,0 mm M8 |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
| 1 x | Bags BULL Mo1 2.6m "Luxe" |
| 1 x | Pipa 3D F-16 Scale 1/6 |
| 1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
| 1 x | Wing Joiner BULL MØ1 2.600mm |
| 1 x | Brake controller for 28 and 36 mm Brakes |
| 1 x | BOEING 727, Retract set for Boeing 727 |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
| 1 x | 3,2x1000 mm 2:1 black termoretract tube |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Propeller electric carbon 10.5x7 |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | PROPELLER ELECTRIC glass 9,5x6 |
| 1 x | Propeller electric carbon 7x7 |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
| 1 x | Gracia (Top Model) |
| 1 x | Central support Speed 600 |
| 1 x | Indoor motor holder |
| 1 x | 10 mm gas motor standoff |
| 1 x | |
| 1 x | Cooler motor type 300 |
| 1 x | Cooler motor type 400 |
| 1 x | Motor mount for 1 m models |
| 1 x | Bearings for motor HACKER C50 |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
| 1 x | BETA 1400 ARF Red |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | SIG Coverall 1.2x1.8 m |
| 1 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | PVC transparent battery termo-retract 70 mm (10 m) |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Ply-Span 450x600/13g Red |
| 1 x | Propeller electric carbon 10x8 |
| 1 x | Propeller electric carbon 9.5x7 |
| 1 x | Welder 100W/200V |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | Dremel 3000 130W |
| 1 x | Precision wrench L100 mm |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Astra (Top Model) |
| 1 x | TAKEO 3.6m electric |
| 1 x | Gracia Maxi ARF, spare wings (Top Model) |
| 1 x | SATORI 2 PRO V C64 F5J |
| 1 x | Gracia Maxi ARF (Top Model) |
| 1 x | |
| 1 x | Metalic motor holder for class 550-600 |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor holder for AC 28/7 |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | Cooler motor type 280 |
| 1 x | Cooler motor type 150 |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Frontal support Speed 280 |
| 1 x | Ø 38 mm fiberglass motor-holder for electric motors |
| 1 x | Electric coversion set |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Motor Mount for Multiplex FunJet |
| 1 x | Size "L" motor holder for class 600 |
| 1 x | Ø 28 mm fiberglass motor-holder for electric motors |
| 1 x | Motor holder AXI |
| 1 x | Motor mount for 1200 mm models |
| 1 x | MEKP Harderner 100 g |
| 1 x | MPX 8 pins plug mold |
| 1 x | Kwik link unmount tool |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
 |
| 19,095.21EUR |
