3 x | Servo NARO Max Std |
1 x | Para-RC Mix |
1 x | Ballast 700gr OPALE |
1 x | USB Mini Camera endoscope |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | 10 mm gas motor standoff |
1 x | Oracover Azul 2 m |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Central support Speed 280 |
1 x | Motor A50-16 S V4 |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | A30-M/L/XL Backmountset complete |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Motor mount for 1 m models |
2 x | WingFix ULTRA Black Edition |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Gates hinge |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Pilot "Duke" Legends Series (Slimline) |
1 x | 15 mm reinforced hinge |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Support XT60 conector (2 pcs) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | 6 mm blue aluminium threaded horn with patella |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | SUS wire 3m (nylon coated) |
1 x | Cable with accesories |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Motor OS 3820-1200 electric |
2 x | SE Ring 240 mm (2 pcs) |
2 x | SE Ring 400 mm (2 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Ring 320 mm length (5 pcs) |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | SE Ring 300 mm (2 pcs) |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Absorver mount set for 5-10 Kg models |
1 x | 100 Newtons FEMA absorber |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Boomerang SPRINT V2 Red/Yellow |
1 x | SPS 70V 100/200 A |
1 x | Multi-adapter balancer JST/C - TP |
3 x | Interruptor RX/Batterie |
2 x | Electronic switch JETI SP06 Opto |
1 x | Pin hinge 34x16 mm (10 uds) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 1/12 Pilot "Langley" |
1 x | Indoor hinge with servo arm integraded |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Small aluminium horn gold (2pcs) |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Long horn 50x26 |
1 x | UBEC 6A KAVAN |
2 x | Short adjustable control horn 3x24 |
1 x | Pilot "Anthony" (Slimline) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Micro control horn (2 pcs) |
1 x | Robart Door Hinge (Pk2) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | RH long aluminium horn (2pcs) |
1 x | Flap hinge (6 pcs) |
5 x | Starter EM Gear Power 80 |
1 x | Angle measurer |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Field folding model stand SebArt |
1 x | Medidor ángulos y/o incidencias |
1 x | Extension 6 lipos XH > EH |
1 x | Extension 2/3 lipos JST - JST/C |
2 x | Extension 2/3 lipos JST/C |
1 x | MAX BEC |
1 x | PSC 5 |
2 x | MPS Gas-Cap-Powerswitch |
1 x | SBEC 40 |
1 x | Male Prolonger TP 4/5S |
1 x | DPSI magnetic switch actuator (housing) |
1 x | SPS 70V 140/280 A |
1 x | MAX BEC 2 |
2 x | Long Switch On/Off micro |
1 x | SBEC 30 D |
1 x | MAX BEC 2D plus EX |
2 x | JETImodel DPS 40 |
2 x | Extension 5 lipos JST - JST/C |
1 x | SWTU2 switch |
1 x | PSC 6 |
1 x | Selfstart electronic switch |
1 x | Extension 5 lipos JST/C |
1 x | Switc electronic 30 Amp |
1 x | Pins M connect Multipin connectors AWG 20-24 |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Combo AM480 T-Motor 650 Kv |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | 1/6 Pilot "Garry" |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Small aluminium horn red (2pcs) |
1 x | FesEx-Uni6 System |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
2 x | Miniature brass strap hinge, 1 m |
3 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | Pilot "Goose" (Slimline) |
1 x | 1/6 Pilot "John" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Cinta Goldfix 1m |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Marker ties (20 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | 20x200 mm battery rings |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Tape GFK 38 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | LED blink wire flashing (orange - 2pcs) |
1 x | Motor Mega AC 16/15/07 |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | CC 11 Conector |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | 3 mm Prop Adapter M6 |
1 x | TURBINATOR 2 ORANGE/SILVER 1778 mm Combo |
1 x | RANGER Jet NAVY 1.854mm combo |
1 x | Foam air filter Ø 48 mm, blue |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Ball link M2 (10 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | Adjustable launching hook |
1 x | Motor Mega AC 16/07/12 |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Xplorer4 anemometro |
1 x | Long ball link M2 (6 uds) |
1 x | CC 03 |
1 x | Motor Mega AC 22/45/03 E |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | 1/6 Pilot "Tony" |
1 x | SCHARNHORST Battleship 1:200 |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
2 x | Surface Indicator Gauge Small |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | JETImodel Addcap 1640 |
1 x | Female connector for 10 pines AWG |
1 x | Air Intake manifold 90° - Large |
1 x | Electric coversion set |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Piston ring for DA-150 |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | 25 mm reinforced hinge |
1 x | 6 mm M3 variable inclined horn |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | JETImodel SINGLE BEC |
2 x | Starter EM Gear Power 250 |
1 x | Propeller balancer |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Long pinned hinge (6 uds) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | DYNAMOMETER S-1580 |
1 x | Micro control horn T2 Ø 1 |
1 x | Extra long horn 60x30 |
1 x | Small control horn with bearing (2 pcs) |
1 x | EWC3 40 cm wing connector |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | Male connector for 12 pines AWG |
1 x | Cable Cargador FUTABA |
1 x | MXS-C (Mini) Blue |
1 x | EDGE XL Orange |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Equipment set XL |
1 x | Propeller balancer |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Giant Scale Muffler D.A. 70 |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Reed valve for DA 50-R |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Cylinder for ZG20 |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Spring Clip Ø25 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
|
24,621.39EUR |