| 2 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | 3.2 mm Prop Adapter M6 |
| 2 x | Tirpiz Battleship 1:200 |
| 1 x | 3,2 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Prop Shaft Adapter 8 mm/M12 "long" |
| 1 x | Aero-Master Wings (Aero-naut) |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | La Capitania di Venetia accesories |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 1 x | SCHARNHORST accessories |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | SCHARNHORST Battleship 1:200 |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | Aero-Master (Aero-naut) |
| 1 x | Prop Shaft Adapter 5 mm "long" |
| 2 x | MG cannon 1.8 cm (5 pcs) |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Xplorer4 anemometro |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Cable with accesories |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | 20 mm carbon horn |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Xplorer2 anemometro |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | SC NAVY V15R |
| 1 x | Motor RACE 20 Navy 12v |
| 1 x | Motor ACTRO 35-4-790 |
| 1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 1 x | Rubber profile 8-2 mm 2M |
| 2 x | Profile ABS half cane 3x1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Dust collector for mould cleaning |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Conector FUTABA Servo female (10 pcs) |
| 1 x | 6 mm M3 variable horn |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Cable control set |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Bag connector 2 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Conector XT-30 (hembra) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Conector FUTABA Servo male (10 pcs) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Towing hook <3m |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Support Pitot JETI |
| 1 x | 15x7 tree blades propeller LEFT |
| 1 x | 50 mm white plastic spinner for folding propeller |
| 1 x | ALU servo arm 90º 3 mm shaft |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Propeller balancer |
| 1 x | Brass wire 0.5 mm (25 m) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | Vasa model Catapult |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Cinta Goldfix 1m |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | Boat 82 mm |
| 1 x | 39,0 mm propeller (rigth propeller) |
| 1 x | Spinner black 40-45mm |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | CC 02 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Connector CAN 15 |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Battery charging cable XT60 |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | EasyFLY Addon |
| 1 x | Programador FUTABA USB CIU-3 |
| 1 x | SERVO S9177SV HV S-Bus2 Programable |
| 1 x | Schul-Malpinsel Gr.5 |
| 1 x | Servo MKS HV 777A+ |
| 1 x | XH male balance (6S) connector (2 pcs) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | Gear set HITEC HS-125MG/5125MG |
| 1 x | 89 mm double servo arm with bearing (2 pcs) |
| 1 x | Soporte servo KST X10 mini / DS135MG |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
| 1 x | Fail Safe air retract |
| 1 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
| 1 x | Antiaircraft gun 10.5 cm (2 pcs) |
| 1 x | Nylon gear block Ø 4 mm (2 uds) |
| 1 x | BLOCK m.Ose Ms vern 12 |
| 1 x | Spinner propeller pleg. 40 mm / 4 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5 mm |
| 1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
| 1 x | Block 21x19 mm (5 pcs) |
| 1 x | Block 1Rolle 5x7x3 mm (5 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | CC 01 |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Circlick securite |
| 1 x | CC 03 |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | CM-3 |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | DPS Switch JR/JR |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | Precision wrench L100 mm |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
 |
| 6,296.29EUR |
