| 1 x | USB Mini Camera endoscope |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Cockpit plastic closing |
| 2 x | Screw-lock connector M2 (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | Canopy Latch |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Covered closure or fairings |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 2 x | Glases Aspen |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 2 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 2 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | Oracover Black 10 m |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 2 x | Support FUEL DOT V3 |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 3 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | SD HC 8 GB |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
| 1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Baseplate servo |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Glases Flitemaster |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 2 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Turbina X132 H "Compact Version" |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Variable Flow Smoke Pump System |
| 1 x | Fod Guard 73x32 mm |
| 1 x | Jet Pipe for ASPIRE 2m JMF |
 |
| 8,805.33EUR |
