| 2 x | 800TVL CMOS camera for FPV |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 3 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 3 x | Motor DLE 430 cc - Paramotors |
| 2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 2 x | Motor DLE 200cc Premium Muffler |
| 1 x | Digital precision scale up to 2000 g |
| 2 x | Xplorer3 anemometro |
| 3 x | Oils Pumps Empty (1 liter) |
| 1 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 2 x | Xplorer1 anemometro |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | Xplorer2 anemometro |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 2 x | Ball Link Plier |
| 2 x | Xplorer4 anemometro |
| 2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Parachute BACKUP X100 |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Ballast 700gr OPALE |
| 2 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Set cintas unión paracaídas 145 cm |
| 4 x | Windsock Ozone L -1200 mm |
| 2 x | Para-RC Mix |
| 1 x | Opale Rucksack |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 2 x | Paramotor Kit Camo H1.5/ Ben Red |
| 2 x | LUCAS pilot ARTF |
| 2 x | Trike XL motor set (motor+esc+prop) |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Towing hook <3m |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Carbon plate 350x150x3.0 mm |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Motor DLE 200cc Std |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 1 x | 10-15mm Servo Arm HITEC |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Bags wings/rudder ODYSSEY |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Blue "FUEL VENT" round aluminum overflow socket |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | Servo MKS HV747 |
| 1 x | PS-050 TONEGAWA Servo |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Blue metalic ball link M2/2 azul (2 pcs) |
| 1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | Captador RCEXL para DA |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 1 x | Blind nut M8 (10 pcs) |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Servo GO-02 Digital 1.8g |
| 2 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | Servo KST X10-710 V8.0 7.5Kg HV |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | MR30 connector male |
| 2 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
| 1 x | Antenna holder bracket double |
| 1 x | Bags wings/rudder ASPIRE |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | USB programador GO servos |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Dust collector for mould cleaning |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Socket Screw M3x9 mm |
| 1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
| 1 x | Servo MKS HBL380 |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | Gear for MICRO BB |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Para-RC Trike "RC-Bullix" |
| 2 x | MAX pilot ARTF |
| 1 x | Servo mounting frame SV-1260MG |
| 1 x | Paramotor Trike XL |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Kobuz 5000 mm (Airwold) |
| 1 x | Fox 4000 mm (Airwold) |
| 1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
| 1 x | Fox MDM 1 4000 mm DeLuxe |
| 1 x | Fox 4000 mm Airworld,cabina |
| 1 x | ASK 21 6.8m |
| 1 x | Fox MDM 1 4000 mm Std. |
| 1 x | EasyFLY Addon |
| 1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
| 1 x | ASH 31 6.08m Composite Hollow Molded |
| 1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
| 1 x | LO 100 ARC 3.3m,frame canopy |
| 2 x | Parachute P4 |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Fiberglass plate 620x540x1,0 mm |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Fiberglass plate 1200x1000x0,2 mm |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | Propeller 11x4,7 SlowFlyer |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Fod Guard 67x32 mm |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Electronic double valve landing gear |
| 1 x | 90x60 mm standart servo cover |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Savox Brushless Servo SC-1251 MG |
| 1 x | LIBELLE Standard 3.8m D-box H-201 |
| 1 x | Servo NARO Max Std |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
| 1 x | ASW 15 5000 mm (Airwold) |
| 1 x | Hovercraft sailcloth |
| 1 x | DG-303 ACRO 3750 mm (Airworld) |
| 1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
| 1 x | LO 100 ARC 3.3m,cabina |
| 1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
| 1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
| 1 x | PPS-4D Propeller |
| 1 x | Gobe R-26S (Airwold) |
| 1 x | Micro Crystal RX 35.010 Ch 61 |
| 1 x | Fox 4000 mm with flaps (Airwold) |
| 1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
| 1 x | LO 100 ARC 3.3m |
| 1 x | Fox MDM-1 ARF 3.5m Orange |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
| 1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
| 1 x | LUNAK 4,00 m |
| 1 x | Fox 4000 mm Airworld,canopy frame |
| 1 x | Micro Crystal RX 35.120 Ch 72 |
| 1 x | Crystal Universal TX 35.140 Ch 74 |
| 1 x | ASW 20 5000 mm with winglets (Airwold) |
| 1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
| 1 x | DG-303 ACRO 3750 mm, winglets |
| 1 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
| 1 x | Fox MDM 1 6000 mm |
| 1 x | Crystal Universal RX 35.130 Ch 73 |
| 1 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
| 1 x | Indoor Brushed motor kit |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Charging Extension 50cm for 2 Battery |
| 1 x | BULL MØ1 2.600mm YELLOW |
| 1 x | BULL MØ1 2.600mm (mono color) |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
| 1 x | PowerBox Smokepump |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | External LED's (2 pcs) |
| 1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
| 1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
| 1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
| 1 x | PT 22x10 EL Propeller |
| 1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
| 1 x | Propeller 12x6 Falcon electric |
| 1 x | Retract undercarriage |
| 1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | 20x13 Falcon electric carbon prop (64g) |
| 1 x | Propeller 3x3 |
| 1 x | Charger ISDT 608AC 200W |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Reed valve for DA-60/70 |
| 1 x | Cylinder ZG 26SC/SLH |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | FOX MDM-1 3.500 mm ARF White |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Cable Cargador FUTABA |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | Screws of the Back Cover for DC Tx (10pcs.) |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | 51 mm INO spinner (carbon imitation) |
| 1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | 63 mm INO spinner (carbon imitation) |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Bags de Luxe ODYSSEY |
| 1 x | Spinner 82mm Black ventilado |
| 1 x | Soporte servo KST X08/H and Plus |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
| 1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Straightened threaded rod M2-1m |
 |
| 89,800.90EUR |
.JPG "L-shaped servo mount")
