| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Ferrita 17x10x6.5 mm |
| 4 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 4 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 3 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 3 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 4 x | Carbon fiber rod 14 mmx1000 mm |
| 3 x | Carbon fiber rod 2.0 mmx1000 mm |
| 2 x | Ferrita 27x14x7 mm |
| 4 x | Carbon fiber rod 0.5 mmx1000 mm |
| 4 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 2 x | |
| 2 x | Circlick securite |
| 2 x | Universal Colour Paste deep black 50 g |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | BEC 3A FOXY |
| 2 x | 5 LiPo XH>EH adapter |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | CC 02 |
| 2 x | 1000 ml sealer (DOPE) |
| 3 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 2 x | 30 cm BEC cable (female) |
| 2 x | CC 01 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | 500 ml sealer (DOPE) |
| 2 x | TrainerCord (master-learner) |
| 1 x | CC 03 |
| 2 x | JETImodel SINGLE BEC |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Silent-blocks DLE 170M |
| 2 x | Small Crow DLE-170M |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Glases Ace |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 2 x | Glases Stratus |
| 2 x | 1/6 Pilot "Garry" |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Glases Aspen |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Piloto JET 1:3,5 |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | 1/12 Pilot "Cougar" |
| 2 x | Glases Innovation Plus |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Pine wood slat 10x10x1000 mm |
| 2 x | Piloto Jet "Green" 1/6 Scale |
| 2 x | 1/6 Pilot "Buddy" |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | Piloto jet 130 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 2 x | Carbon fiber rod 20 mmx1000 mm |
| 2 x | Landing gear axle Ø 5 mm (2 uds) |
| 3 x | Carbon fiber rod 0.5 mmx1000 mm |
| 2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 2 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Male connector for 12 pines AWG |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
| 1 x | Long Switch On/Off micro |
| 2 x | Interruptor RX/Batterie |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Male connector for 16 pines AWG |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | CC 05 |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 2 x | 2 LiPo XH>EH adapter |
| 2 x | Extension 5 lipos JST - JST/C |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 2 x | Spannlack 1000 ml |
| 2 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Motor DLE 430 cc - Paramotors |
| 1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
| 1 x | MIG 29 3D RTF Red Start SET + Gyro |
| 1 x | MIG 29 EDF |
| 1 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Hovercraft sailcloth |
| 1 x | Servo NARO Max Std |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | PIX Hawk with accesories |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | KATANA DV 20 1470 mm |
| 1 x | Glases Nimbus |
| 1 x | Me-163 |
| 1 x | Pilatus PC-21 50E, Electric L.G (SebArt) |
| 1 x | Glases Nimbus "Black" |
| 1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | 1/6 Pilot "John" |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | SERVO HOLDER |
| 2 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Piston ring for DA-50R and DA-100 |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
| 1 x | Carburetor for ZG45SL and ZG62/S/SL |
| 1 x | Piston ring for ZG 20 and G240RC |
| 3 x | Motor OS 3820-1200 electric |
| 1 x | Landing gear axle Ø 8 mm (2 uds) |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Landing gear axle 4x21 4 mm (2 uds) |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Motor OS 3805-1200 electric |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Motor ORBIT 20-12 with coolingfan |
| 1 x | Motor Advance 50-6 |
| 1 x | FesEx-Uni6 System |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
| 1 x | Piston ring for DA-150 |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Male connector for 20 pines AWG |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Extension 6 lipos XH > EH |
 |
| 21,249.68EUR |
.JPG "L-shaped servo mount")
