| 2 x | Tape GFK 50 mm |
| 2 x | Tape GFK 25 mm |
| 2 x | SE Ring 200 mm (2 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | |
| 1 x | Cinta Goldfix 1m |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 2 x | Marker ties (20 pcs) |
| 2 x | SE Ring 350 mm (2 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Spikes Band (5 m) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | SE Ring 480 mm (2 pcs) |
| 3 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 3 x | 20x200 mm battery rings |
| 2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 2 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 2 x | Long pinned hinge (12 uds) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Crimping tool |
| 2 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 2 x | Screwdriver for Torx® TX8 |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | |
| 2 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | 2,0x50 mm allen screwdriver |
| 2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Digital scale up to 40 kg |
| 2 x | Hot Glue Stick GREEN |
| 1 x | Gates hinge |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 3 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 2 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 2 x | Spring lock washer 3.1 mm (20 pcs) |
| 2 x | M3 black washers (4 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 2 x | Quicklock washer 3.5 mm (10 pcs) |
| 2 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Stickers-digit for marking |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | Oracover Black 10 m |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Support XT60 conector (2 pcs) |
| 4 x | SE Ring 300 mm (2 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 2 x | Miniature brass strap hinge, 1 m |
| 2 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Tape GFK 38 mm |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Sandpaper file 13 mm |
| 2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Ball Link Plier |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Ball Link Plier |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
| 1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
| 1 x | Nylon Screw M5x30 |
| 1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Nylon Screw M6x40 |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Nylon Screw M4x20 |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Pan Head Screw M2x8 PH countersunk head |
| 1 x | Threaded insert M5 (10 pcs) |
| 1 x | Lock nut M5 (10 pcs) |
| 1 x | Nut for mounting M3 (4 pcs) |
| 1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
| 1 x | Blind nut M2 (10 pcs) |
| 1 x | Socket Head Screw M2x10 |
| 1 x | Blind nut M4 (4 pcs) |
| 1 x | Tapping Screw M2.2x9.5 (10 pcs) |
| 1 x | Hexagonal Nut M1 (10 pcs) |
| 1 x | Screw M3x30 (10 pcs) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | PT 20x13 EL Propeller |
| 1 x | PT 16x10 E Propeller |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Ventus 1:4 set of instruments |
 |
| 1,648.26EUR |
.JPG "L-shaped servo mount")
