| 1 x | 140 mm rods set for direction control |
| 1 x | 80 mm rods set for direction control |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 3 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Allen wheel collar M4x6 |
| 3 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | 100 mm rods set for direction control |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 2 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Clip fixing for wing (2 pcs) |
| 2 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | 140 mm rods + T patellas set for direction control |
| 3 x | Allen wheel collar M3x5 |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 3 x | Canopy Latch |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | JETImodel SINGLE BEC |
| 1 x | CC 05 |
| 1 x | Cockpit plastic closing |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | CC 03 |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | CC 01 |
| 2 x | 30 cm BEC cable (male) |
| 1 x | 5 LiPo XH>EH adapter |
| 2 x | Dean "T" - Futaba Adapter |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | USB HLS prog. interface |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 2 x | 2 LiPo XH>EH adapter |
| 2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Covered closure or fairings |
| 1 x | TrainerCord (master-learner) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Snap long M2 (10 uds) |
| 3 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 3 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 3 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 3 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 3 x | BALSA trip 10x10x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 3 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Horn with ball 40x30 |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Cable control set |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Horn with ball 55x40 |
| 1 x | Small aluminium horn gold (2pcs) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 2 x | Landing gear frontal support 25x32x16 |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Selfstart electronic switch |
| 1 x | JETImodel Addcap 1640 |
| 1 x | Cockpit aluminium closing |
| 1 x | DPSI Ampere battery backer |
| 1 x | PSC 6 |
| 1 x | Connector CAN 15 |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Support pump Xicoy X45 |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | DPS Switch JR/JR |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Adapter 3,0 mm M8 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | One touch canopy lock |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 2 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Pushrod octagone 3/2 |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
 |
| 1,270.80EUR |
.JPG "L-shaped servo mount")
