| 2 x | Adapter lead MPX/XT60 |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 2 x | 2 LiPo XH>EH adapter |
| 2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | CM-3 |
| 2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 2 x | CC 05 |
| 2 x | CC 03 |
| 1 x | TrainerCord (master-learner) |
| 3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Adapter lead MPX/EC3 |
| 3 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | USB HLS prog. interface |
| 2 x | Bec MR UBEC 5A (5v/6v/7v) |
| 2 x | JETImodel SINGLE BEC |
| 4 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 3 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 2 x | Dean "T" - Futaba Adapter |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Bungee HLG Premium |
| 2 x | Jeti Black cap |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Threaded coupler M2 (10 uds) |
| 3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Angled clevis with threaded rod M3 |
| 2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | Adjustable launching hook |
| 3 x | Fixed launching hook |
| 2 x | Towing hook |
| 1 x | Tow hook for tug |
| 2 x | Towing hook <3m |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 3 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Female connector for 16 pines AWG |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | CC 02 |
| 2 x | MPX-Dean "T" Adapter |
| 2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 3 x | BEC 3A FOXY |
| 2 x | 5 LiPo XH>EH adapter |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Extension 5 lipos JST - JST/C |
| 2 x | Circlick securite |
| 1 x | 3,2 mm Prop Adapter M5 |
| 2 x | 2,3 mm Prop Adapter M5 |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | Threaded coupler M2 (10 pcs) |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Pulley brass 8/2 (2 pcs) |
| 1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
| 1 x | Micro clevis (10 uds) |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
| 2 x | Tirpiz Battleship 1:200 |
| 1 x | SCHARNHORST Battleship 1:200 |
| 2 x | SCHARNHORST accessories |
| 1 x | Stick coupler Ms 15 mm |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | F450/550 Quadcopter, landing gear |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Pulley brass 12/2 (2 pcs) |
| 1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
| 1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Rubber bushing with bracket "A" type (2 pcs) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 2 x | SERVO HOLDER |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
| 2 x | LOWER TOW HOOK |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Crystal Universal RX 35.130 Ch 73 |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | 3.2 mm Prop Adapter M6 |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 1 x | PPS-4D Propeller |
| 1 x | Crystal Universal TX 35.140 Ch 74 |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Program card KAVAN PRO |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Carbon plate 350x150x1.5 mm |
| 2 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 2 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Actrocon 30A ESC |
| 1 x | CAM-Carbon Light Prop 12x7" |
| 1 x | Catalog AERO-NAUT 2016 |
| 2 x | ALU double servo arm 3 mm shaft |
| 1 x | Ancla 16 mm (2 pcs) |
| 1 x | Antiaircraft gun 3.7 cm (5 pcs) |
| 1 x | Actrocon 60A ESC |
| 1 x | Antiaircraft gun 10.5 cm (2 pcs) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
| 1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
| 1 x | |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Ancla Hist. 67 mm (2 uds) |
| 2 x | ALU servo arm 90º 3 mm shaft |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Ancla Admiralsanker 70 mm (2pcs) |
| 1 x | CAM-Carbon Light Prop 14x6" (Prop left) |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Campana Ms 14 mm (5 pcs) |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | 75 mm |
| 1 x | Ancla 40 x 24 mm (2 pcs) |
| 1 x | CAM-Carbon Light Prop 13x6" (Prop right) |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | Aero-Master Cabine (Aero-naut) |
| 1 x | CAM-Carbon Light Prop 13x5" Q500 (Prop left) |
| 1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Ancla metal 40 mm (2 uds) |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Anchor 50 mm (2 uds) |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Motor 2212 (1000KV) Quadcopter F450 |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | 3 LiPo XH>EH adapter |
| 2 x | 4 LiPo XH>EH adapter |
| 1 x | Savox Brushless Servo SB-2271SG |
| 1 x | Tap FESTO 4-4 mm |
| 1 x | FESTO connector M7 Quick 6mm 90º |
| 1 x | Servo HITEC HS-5485 HB Digi |
| 1 x | Hitec 52 mm servo arm |
| 1 x | SERVO S9177SV HV S-Bus2 Programable |
| 1 x | Servo HITEC HS-225 MG |
| 1 x | Servo HITEC HS-311 |
| 1 x | Servo HITEC HS-53 |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | Servo HITEC D950 TW |
| 1 x | Servo arms set HS-65HB/MG/5065MG |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Battery charging cable XT60 |
| 1 x | Servo SAVOX SV-1261 MG |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | Piñones SAVOX SH-0350 |
| 1 x | Quick hose connector 4-3 mm |
| 1 x | Y-Hose connector 2-2-2 mm |
| 2 x | FESTO connector M7 Quick 4 mm |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | 58 mm micro servo cover |
| 1 x | Servo HITEC D625 MW |
| 1 x | Servo Digital HITEC HS-5065 MG |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Gear carbonite set HITEC HS-6965 |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | Servo HITEC HS-125 MG |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | Racor 2/3 mm |
| 1 x | CC 01 |
| 1 x | SAVOX SH 1250 MG servo digi |
| 1 x | SAVOX SH 0254 servo |
| 1 x | SAVOX SH 1290 MG servo digi |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | Servo SAVOX SA-1256 TG |
| 1 x | Jeti Box mini |
| 1 x | Conector FESTO G1/8 Quick 4mm 90º |
| 1 x | Y-Hose connector 4-4-4mm |
| 1 x | Conector FESTO M3 Quick 3mm 90º |
| 1 x | Faucet FESTO |
| 1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
| 1 x | Racor "Y" 3 mm |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | FESTO Filter 4 mm |
| 1 x | Gear for D 200 BX |
| 1 x | FESTO connector M7 barb fitting 4mm |
| 1 x | Hacker X-Pro USB interface V2 |
 |
| 14,979.37EUR |
.JPG "L-shaped servo mount")
