| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 2 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Lock washer 2.7 mm (20 pcs) |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 2 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Stickers-digit for marking |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Gates hinge |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Long pinned hinge (6 uds) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | 25 mm reinforced hinge |
| 2 x | Miniature brass strap hinge, 1 m |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Conector Servo female 4 pines |
| 1 x | Gold antispark 4 mm plug |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | 30 cm DEANS female connector |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Connector CAN 15 |
| 1 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | MPX Sub-D Adaptor |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Cockpit plastic closing |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Parachute BACKUP X100 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Screw M3x12 (10 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | Threaded insert M5 (10 pcs) |
| 1 x | Screw M2.5x5 (10 pcs) |
| 1 x | Threaded insert M6 (10 pcs) |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Socket Head Screw M2x8 |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | XH male balance (7S) connector (2 pcs) |
| 1 x | Glass Bubbles (0,12 g) 350 ml |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
| 1 x | White gelcoat 1 Kg |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
 |
| 7,149.18EUR |
