1 x | Motor DLE 170 M- Paramotors |
1 x | Big Crow DLE-170M |
2 x | Small Crow DLE-170M |
2 x | Motor DLE 200cc Premium Muffler |
2 x | Motor DLE 200cc Std |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
3 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Ball link M3 (6 uds) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Ball link M3 RPA's-UAV's |
1 x | Long ball link M1.6 (6 uds) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Long ball link M2 (6 uds) |
1 x | M3 Maxi ball link (2 uds) |
3 x | Ball link M2 (10 pcs) |
2 x | Ball link M2,5 (10 pcs) |
1 x | Short ball link M2 (6 uds) |
1 x | Bungee HLG Premium |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Balsa panel 1.5x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
3 x | BALSA triangular 8x8x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Ferrita 17x10x6.5 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | 76 mm light wheels (2 pcs) |
1 x | LUCAS pilot ARTF |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Motor DLE 430 cc - Paramotors |
2 x | Shirt Hispano Aviación |
1 x | Short ball link M3 (6 uds) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | 28 mm tailwheel unit |
1 x | Snap long M2 (10 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | BALSA trip 10x10x1000 mm |
2 x | Tip wing protector 40x14 (2 pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Kavan Car 25% nitro 1l |
1 x | IKURA GPS 4.28 m |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Cockpit aluminium closing |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Control for forward wheel (MINI) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Cockpit plastic closing |
1 x | Manometer 4 mm |
1 x | Mini neumatic retract landing gear |
1 x | Mudguard wheels 112/127 mm |
1 x | Tail gear set (60-120 class) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Tail wheel for 8-12 kg models |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | PRO-HV Dual Action Valve |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Tail wheel for 5-8 kg models |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Landing gear retract neumatic (Jet Legend) |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Air pressure gauge |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Snap for floding prop for 2 mm axi |
1 x | Neumatic retractable landing gear (Aero-Naut) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Spinner NUT 1/4x28 |
1 x | Spinner NUT M4 |
1 x | Spinner NUT M6 |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | FIALA Propeller 23x8 Electric |
1 x | Cap Hispano Aviación |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Balsa panel 6.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Actuator Electric 25 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Spinner NUT M8x1,25 |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Spinner NUT M5 |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | Spinner NUT M6 |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Spinner NUT M10x1 |
1 x | Spinner NUT M5 |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Cable coupler M2x66 (2 uds) |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Foreman, scale 1:32 |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Left) |
1 x | BALSA triangular 15x15x1000 mm |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Angle of incidence meter |
1 x | Albatros red/white (Top Model) |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Bidule 111 3000 mm |
1 x | Charger LiPo Charger4 |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Shaft sleeve LAMA |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 12.5x6.5 |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | LED wire (white - 2pcs) |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | Propeller CFK 15x7 |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Carbon blade 3D 230 mm |
1 x | Combo lighting module with covering drop shape |
|
24,988.16EUR |