1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | 4 LiPo XH>EH adapter |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | TrainerCord (master-learner) |
1 x | PCARD Wireless System |
1 x | Oracover ROYAL RED 2m |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Interface Realflight Simulator |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Initior Receiver FRX2 Wireless |
1 x | Green smoke canister 140 g |
3 x | 400 Newtons FEMA absorber |
1 x | Adapter lead MPX/XT60 |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Ply-Span 450x600/13g Blue |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Oratex Antik 2m |
1 x | Oracover GREY Seafire Sea 2m |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | EasyFLY Addon |
1 x | Oratex Natural White 2m |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | AX-60 starters (5 pcs) |
1 x | Xplorer3 anemometro |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Oracover Yellow CUB 10 m |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | "M" set |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Propeller balancer |
1 x | Support pump Xicoy X45 |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | One touch canopy lock |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Crimping tool |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Hot Glue Stick RED |
1 x | Hot Glue Stick BLACK |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 1/6 Pilot "Cindy" |
1 x | 1/12 Pilot "Langley" |
1 x | Glidder Mü13e (Bergfalke) |
1 x | Motor rotor LA-500 |
1 x | Pilot LA 500 |
1 x | Glider STROLCH |
1 x | LA500 pre-rotation gear hub |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | LA500 housing-lower cyclic |
1 x | Set stickers JEEMO "Andy" |
1 x | LA500 pre-rotation gear |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Glider KNIRPS |
1 x | LA500 rotor head shaft |
1 x | Canopy Sweet / Siesta |
1 x | Avia spare blue cockpit (Top Model) |
1 x | FANTASY ARF 3.0m, Fundas alas |
1 x | Gobe R-26S (Airwold) |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
1 x | FOX 2.300 mm V2 PNP (FMS) |
1 x | LO 100 ARC 3.3m |
1 x | Fascination 3600 mm (Top Model) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Cable adapter iCharger |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Fiberglass tube 6/4x1000mm |
1 x | UHU Por 50ml/40g |
1 x | 1/6 Pilot "Tony" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | 1/4 Pilot "Heidi" |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Jun-Si iCharger 4010 Duo |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | 200 Newtons FEMA absorber |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | NF-3XL set |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | NF-3X-350 set |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
|
8,109.47EUR |