| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Small aluminium horn gold (2pcs) |
| 2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Cable with accesories |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | Horn with ball 40x30 |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Couple M4 for wire (10 pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 2 x | Z type of cable coupler Ø 1 (2 uds) |
| 3 x | Z type of cable coupler Ø 2 (2 uds) |
| 2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 2 x | Ball Link ALU M3 - RH (1 pcs) |
| 2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 2 x | Ball link duraluminium M3 V1 (10 pcs) |
| 2 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Threaded coupler M2 (10 uds) |
| 3 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 2 x | Angled clevis with threaded rod M3 |
| 2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Oratex Antik 2m |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 1 x | Spray Graphit 33 |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 2 x | Support Antena 2.4 Ghz (2 pcs) |
| 2 x | Support FUEL DOT V3 |
| 2 x | Angle support XT60 conector |
| 2 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | 20 mm carbon horn |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 2 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
| 1 x | Transmitter Balancer Futaba T-10CG |
| 1 x | Motor mount class 48" |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | wire tensioner (blue) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Rubber bushing with bracket "A" type (2 pcs) |
| 1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Wire easy tensioner (red) |
| 1 x | Motor mount EDGE 540 48" |
| 1 x | Boomerang SPRINT V2 Red/Yellow |
| 1 x | BD-5 Pro ARF |
| 2 x | Small aluminium horn red (2pcs) |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 2 x | Pulley brass 10/2 (2 pcs) |
| 1 x | Micro clevis (10 uds) |
| 1 x | Small kwik link (10 pcs) |
| 2 x | Pulley brass 6/1,5 (2 pcs) |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Set clevis for pull-pull (TY13233 & TY13234) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Metal clevis M2 (10 uds) |
| 1 x | Turnbuckle M2,5x27/43 (2pcs) |
| 1 x | Turnbuckle M1,6x17/27 (2pcs) |
| 1 x | Charger FUTABA SQN30W12P-08 220v |
| 2 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Switch Cap L (Red) |
| 1 x | Turnbuckle M3 33x49 (2pcs) |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | 5 mm M2 variable horn |
| 1 x | Micro control horn T2 Ø 1 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | ACTIVE ARF Electric 1.995 mm |
| 1 x | Astra (Top Model) |
| 1 x | Albatros ,spare fuselage (Top Model) |
| 1 x | BULLIT Wing 840 mm |
| 1 x | TMM 2512-3S heli |
| 1 x | Astra wing Joinner (Top Model) |
| 1 x | Spring clamp for tube Ø29 mm ext 1pc |
| 1 x | Canopy Astra |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Bidule 170 ARF 3.48 m |
| 1 x | Futaba Aero Large Case - Internal Foam |
| 1 x | Switch moment button, 2 functions, long FUTABA |
| 1 x | PT 21x13 EL Propeller 3 Blade |
| 1 x | PT 22x10 EL Propeller |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | PT 21x13 EL Propeller |
| 1 x | DUPLEX Satellite receiver Rsat 900 |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | Frontal support Speed 400/480 |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | 20-25mm Servo Arm |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | Threaded coupler M2 (10 pcs) |
| 1 x | KIRA 480-38 |
| 1 x | GPS Logger Dymond |
| 1 x | |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | GPS, Vario and altitude Sensor SBS-01G |
| 1 x | Motor UMS Radial-7-35cc glow |
| 1 x | Receiver DUPLEX R4H EX 2.4 GHz |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | ER-40eVo Set B [Complet Set + GS200] |
| 1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
| 1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
| 1 x | ER40 Front Leg (with wheel 80mm) |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
| 1 x | ER40eVo set B (20 Kg) |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Hacker A30-S Radial Set |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Motor holder for AC 28/7 |
| 1 x | Crystal TX 35.180 Ch 78 |
| 1 x | ESC RAY G2 R-20B BEC |
| 1 x | PHASOR RACE 2035/4100 1D |
| 1 x | KIRA 480-43 5,2:1 |
| 1 x | PYRO 750-50L Competition |
| 2 x | Optotronix Aurora Plug |
| 2 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
| 2 x | EWC3 40 cm wing connector |
| 2 x | DPSI 2001 RV |
| 2 x | Heat sink for Optotronix LEDs |
| 1 x | DPSI Micro - RCS RV |
| 1 x | DPSI Ampere battery backer |
| 1 x | Propeller 8x4,3 SlowFlyer |
| 1 x | PYRO 800-48 Long Axi |
| 1 x | PYRO 700-56L |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | EWC3 100 cm wing connector |
| 1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | MPX Sub-D Adaptor |
| 1 x | DPSI Ampere & Voltage bundle |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Cover cap drop-shaped paintable 43 mm |
| 1 x | EWC6 40 cm wing connector |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | Propeller Pleg CAM Carbon 12x11 |
| 1 x | DUPLEX case for Jeti DS handheld transmitter |
| 1 x | Magnetic Connect locking system |
| 1 x | OPTOTRONIX Aurora LCU |
| 1 x | DPSI LR-S (with push buttons) |
| 1 x | DPS Switch JR/JR |
| 1 x | DPSI Micro MPS |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
| 1 x | PowerFuel RX V2 Fuel Pump |
| 1 x | Filter Capacitor JR |
| 1 x | DPSI Micro - RCS |
| 1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
 |
| 17,877.36EUR |
