| 1 x | Motor DLE 430 cc - Paramotors |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Motor DLE 200cc Std |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 2 x | Small Crow DLE-170M |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Parachute BACKUP X100 |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | Adjustable launching hook |
| 2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Long ball link M1.6 (6 uds) |
| 2 x | BALSA triangular 8x8x1000 mm |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Tape GFK 38 mm |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Towing hook <3m |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Piloto JET 1:3,5 |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 2 x | 1/4 Pilot "Heidi" |
| 1 x | |
| 1 x | PPM Encoder Module |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Fixed launching hook |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 2 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Horn with ball 40x30 |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | 1/6 Pilot "John" |
| 2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 1/4 Pilot "Mike" |
| 2 x | Ball link M2,5 (10 pcs) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Ball link M3 (6 uds) |
| 1 x | Tape GFK 25 mm |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Ball link M1.6 (6 uds) |
| 2 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | 18 mm reinforced hinge |
| 1 x | 25 mm reinforced hinge |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 2 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | UHU hart 35 g |
| 1 x | FOAM - CURE™ (24g) |
| 1 x | Big Crow DLE-170M |
| 1 x | Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX |
| 1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
| 1 x | Neck strap JETI DS |
| 1 x | COPILOT Multiplex |
| 1 x | Black tray 2,4EX DC-16/14/24 black |
| 2 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
| 1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
| 1 x | Mono-Switch Memory FUTABA |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 2 x | Futaba Multi-Switch-Prop 12+2 MODUL |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Control horn long w/ball |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Short adjustable control horn 3x24 |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Rudder forward 80x28 "type Kato" |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Device Terminal |
| 1 x | Y-Hose connector 4mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Landing gear strap medium (4 uds) |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Wheel cover holder Ø 5 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Bearing block for noseleg landing gear |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Keypad ALTIS V4 |
| 1 x | Landing gear strap large (4 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | 6 mm M3 variable horn |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | Tap FESTO 4-4 mm |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Y-Hose connector 6-6-6 mm |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Tap FESTO 6-6 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Extra long horn 60x30 |
| 1 x | T-Hose connector 6-6-6 mm |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | 5 mm M2 variable horn |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Altimeter Altis V4 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Servo arm with 4 mm hole to FEMA 9810A |
| 1 x | Y-Hose connector 3-3-3 mm |
| 1 x | Cable control set |
| 1 x | PRO-HV Dual Action Valve |
| 1 x | LiPo Storage Box Type "BIG" |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | Aluminium battery holder red |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Servo BLUE Bird BLS-H71B v2 |
| 1 x | SERVO DES 588 BB MG |
| 1 x | Head lower part New |
| 1 x | LA500 nose |
| 1 x | Cierva C30 Elevator |
| 1 x | Rotor Mast |
| 1 x | LA500 pre-rotation gear |
| 1 x | JETI transmitter DC-14 II Blue Multimode |
| 1 x | Module 2.4GHz T-FHHS "F" Series |
| 1 x | FUTABA F14 + R168DF + Servo S148 |
| 1 x | Tray JETI for DS-12 Black |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | LOWER TOW HOOK |
| 1 x | SERVO HOLDER |
| 1 x | ASH 31 Mi Scale:1/3 - 7m |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Tapping Screw M2.2x9.5 (10 pcs) |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Air Intake manifold 90° - Large |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Pan Head Screw M2x6 PH |
| 1 x | Pan Head Screw M2x8 PH |
| 1 x | L-Connector 1.5 mm x 1000 mm |
 |
| 23,234.60EUR |
