| 1 x | Bisagra papel CA (12 uds) |
| 1 x | Bisagra 18 mm reforzada |
| 1 x | Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs) |
| 1 x | Tubo ABS 18,0x16,0x1000 mm |
| 1 x | Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Helice APC 10x7 Glow/Gas |
| 1 x | Bisagra de nylon 20x20x0,3 (10 pcs) |
| 1 x | Emisora MZ-18, 9 Ch HoTT |
| 1 x | Emisora MZ-12, 6 Ch HoTT |
| 1 x | Emisora MZ-10, 5 Ch HoTT |
| 2 x | Emisora GRAUPNER MZ-24 Pro |
| 1 x | Gancho de remolque hasta 3m |
| 1 x | Gancho de remolcador |
| 1 x | Gancho de lanzamiento regulable |
| 1 x | Gancho de remolque hasta 4,5 m |
| 1 x | Equilibrador hélices |
| 1 x | Carro remolque para veleros 720 x 239 mm |
| 1 x | Medidor angulos tamaño pequeño |
| 1 x | Medidor de incidencias |
| 1 x | Listón de BALSA 2,0x2,0x1000 mm |
| 2 x | Listón triangular de BALSA 15x15x1000 mm |
| 1 x | Plancha contrachapado Abedul 1520x750x4,0 mm |
| 1 x | Plancha contrachapado Abedul 600x300x5,0 mm |
| 1 x | Plancha de balsa 1,0x100x1000 mm |
| 2 x | Listón triangular de BALSA 6x6x1000 mm |
| 1 x | Adaptador equilibrador HITEC (XH) |
| 1 x | Liston de BALSA Borde ataque 8 x 10 x 1000 mm |
| 1 x | Anillas sujeción PROFI TX |
| 1 x | Motor DLE 200cc Premium Muffler |
| 2 x | Motor DLE 170 M - Paramotores |
| 2 x | Motor DLE 430 cc - Paramotores |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Corona grade autoarranque DLE-170M |
| 1 x | Gafas Moritz |
| 1 x | Correa V2 doble |
| 1 x | Cable profesor/alumno JETI |
| 1 x | Bisagra de compuerta negra 30x16 mm (2 pcs) |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | Acople ALU M2,5 Ø 3 (2 uds) |
| 1 x | Cinta Goldfix 1m |
| 1 x | Gancho remolque inferior plano |
| 1 x | Soporte tubo Ø 6mm (10 pcs) |
| 1 x | Soporte bomba Xicoy X45 |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Plancha contrachapado Abedul 600x300x6,0 mm |
| 1 x | Receptor DUPLEX R12 REX Assit |
| 1 x | Receptor FUTABA R7003SB FASST |
| 1 x | Receptor DUPLEX R14 2,4GHz |
| 1 x | Receptor DUPLEX R6 EX 2,4GHz |
| 1 x | Receptor DUPLEX R6 REX Assit |
| 2 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
| 1 x | Receptor DUPLEX R10 2,4GHz |
| 1 x | Autogiro LA500 |
| 1 x | Receptor DUPLEX R7 REX 2,4GHz A40 |
| 1 x | Receptor DUPLEX R10 REX Assit |
| 1 x | Antena Futaba RX R606/17/08/14FS Long: 150 mm |
| 1 x | Listón de BALSA 3,0x5,0x1000 mm |
| 1 x | Gancho de lanzamiento fijo |
| 1 x | Plancha contrachapado Abedul 600x300x0,8 mm |
| 1 x | Receptor de satélite DUPLEX Rsat 900 |
| 1 x | Listón de HAYA redondo 10 mm x 1000 mm |
| 1 x | Plancha de goma espuma (310x210x3 mm) |
| 1 x | Varilla latón hexagonal Ø 4 mm x 1000 mm |
| 2 x | Horn metálico ajustable rosca M3 |
| 1 x | Varilla latón hexagonal Ø 5 mm x 1000 mm |
| 1 x | Helice XOAR 24x8 Electrica |
| 1 x | Listón de HAYA redondo 4,0 x 1000 mm |
| 1 x | Plancha de goma espuma (310x210x8 mm) |
| 1 x | Pupitre Contest-SPult mc-20/mc-24 |
| 1 x | Relleno balsa KAVAN 200ml - color balsa |
| 1 x | Pasta para estaño 20 g |
| 1 x | Helice XOAR 16x7 Electrica |
| 1 x | Hélice sistema de paso variable 9" para Axi VPP (recambio) |
| 2 x | Listón de HAYA redondo 2,0 x 1000 mm |
| 1 x | Hélice 9x7 SlowFlyer |
| 2 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
| 1 x | Tubo carbono (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Helice XOAR 12x6 Electrica |
| 1 x | Modulo OSD Telemetria |
| 1 x | Varilla carbono 0.5 mmx1000 mm |
| 1 x | Unidad EVP para AXI2208/xx y 2212/xx |
| 1 x | Helice FIALA 15x8 3-Blade |
| 1 x | Helice FIALA 23x8 Electric |
| 1 x | Adaptador de hélice 2,3 mm M5 |
| 1 x | Helice APC 11x4.7 SF Pusher |
| 1 x | Helice APC 12x3.8 SF |
| 1 x | Adaptador prision. 5 mm "long" |
| 1 x | Anillo espaciador para hélice graupner 8/5.5 mm |
| 1 x | Helice APC 11x4.7 SF |
| 2 x | Helice FALCON 32,5x11 PUSHER Carbono |
| 1 x | Helice APC 12x8 SF |
| 1 x | Helice APC 10x3,8 SF Electric Pusher |
| 1 x | Helice APC 10x4.7 SF |
| 1 x | VBar Control Touch, midnight black |
| 1 x | Conector Servo hembra 4 pines |
| 2 x | Adaptador Sub-d conector MPX |
| 1 x | Conector DEANS hembra 30 cm |
| 2 x | Conector DEANS 4 pines (1 par) |
| 1 x | Conector 5,0 mm EC5 hembra con funda (2 pcs) |
| 1 x | Conector banana oro 8,0 mm 5 pcs (hembra) |
| 2 x | Conector DEANS (T) |
| 1 x | Conector banana oro 4 mm (Ultralight) |
| 2 x | Conector equilibrado XH (3S) macho (2 pcs) |
| 2 x | Conector banana oro 5,5 mm |
| 1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | Avanti XS Jet, Fundas (SebArt) |
| 1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
| 1 x | Disipador motor tipo 280 |
| 1 x | Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Acoplador 5 - 5 mm |
| 2 x | Rueda de foam Ø 51 mm (2 pcs) |
| 1 x | Antena RX 85 mm HoTT |
| 1 x | Cono hélice fija 60 mm diámetro / eje 5,0 mm |
| 1 x | Cable servos silicona 0,14 mm2 Graupner (5 m) |
| 1 x | Cable servos silicona 0,14 mm2 Graupner (100 m) |
| 1 x | Adaptador 3 LiPos XH>EH |
| 1 x | Cable servos silicona 0,25 mm2 Graupner (100 m) |
| 1 x | Adaptador de hélice 4 mm M6 |
| 1 x | Cono plástico negro hélice fija 42 mm diámetro |
| 1 x | Servo SAVOX SB-2272 SG Highvoltage brushless (Rotor de cola) |
| 1 x | Helice Carbono 15x16 |
| 1 x | Helice Carbono 14x8 Slim |
| 1 x | Helice Carbono 12.5x7 |
| 1 x | Equilibrador hélices |
| 1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
| 1 x | Avanti S Jet, Tubo salida vectorial para JetCat P-180 |
| 1 x | Receptor Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel |
| 1 x | Receptor FUTABA R7014SB FASST Test |
| 1 x | Receptor Futaba R3006SB T-FHSS 2.4GHz |
| 1 x | Avanti S Jet, Soporte (SebArt) |
| 1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
| 1 x | Fundas para el transporte F3A alas |
| 1 x | Cargador Adaptador 12v coche |
| 1 x | Avanti S Jet, Fundas (SebArt) |
| 1 x | F-104 Starfighter USAF (SebArt) |
| 1 x | DUPLEX 2,4EX Expander E2 |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | Sensor de temperatura DUPLEX 2.4EX MT 125 |
| 1 x | Stick DUPLEX con interruptor 3 posiciones para DC/DS |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
| 1 x | Hopper UAT Sebar 600 ml |
| 1 x | Receptor FUTABA R6004 FF FASST |
| 1 x | Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2 |
| 2 x | Rueda de foam Ø 38 mm (2 pcs) |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs) |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs) |
| 1 x | Acelerador Aero EPH 161 (500 g) |
| 1 x | Bolsa vacio 1200 mm x 50 m |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs) |
| 1 x | Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | ARAMID panel nido de abeja 1300x2600x2 mm |
| 1 x | Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm |
| 1 x | Canulas repuesto Mixing tube 50+25g (10 pcs) |
| 1 x | Cianocrilato MD GA460 odourless 20g |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs) |
| 1 x | Listón de HAYA redondo 3,0 x 1000 mm |
| 1 x | Cable silicona 0,25 mm² negro (25 m) |
| 1 x | Cable servos silicona 0,50 mm2 Futaba (100 m) |
| 1 x | Adaptador 2 LiPos XH>EH |
| 1 x | Tail boom brace LOGO 480 |
| 2 x | Motor Scorpion HKIII 4035-560 Kv |
| 1 x | Corona pequeña autoarranque DLE-170M |
| 1 x | Cono plástico blanco hélice fija 42 mm diámetro |
| 1 x | Motor DLE 200cc Std |
| 1 x | Hélice VESS 32A |
| 1 x | Adaptador PH5 para eje de 5mm M8 para AXI2820 y 2826 |
| 1 x | Cono plástico negro hélice fija 45 mm diámetro |
| 1 x | Helice Carbono 23x12 |
| 1 x | Conector equilibrado XH (3S) hembra (2 pcs) |
| 1 x | Conector BEC hembra (10 pcs) |
| 1 x | Conector equilibrado XH (5S) hembra (2 pcs) |
| 1 x | Conector equilibrado XH (2S) macho (2 pcs) |
| 1 x | Conector banana oro 6,0 mm Ultralight (pareja) |
| 1 x | Conector banana oro 2,5 mm (100 parejas) |
| 1 x | Conector equilibrado XH (5S) macho (2 pcs) |
| 1 x | Conector equilibrado XH (4S) hembra (2 pcs) |
| 1 x | Conector banana oro 2,5 mm (pareja) |
| 1 x | Conector ala MPX 8 pines con conector M/H |
| 1 x | Conector banana oro 4 mm |
| 1 x | Protector Conector Dean-T (1 pareja) |
| 1 x | Conectores Kontronik (10 conectores, 5 pares) |
| 1 x | Pletina MPX 4 pines (5 uds) |
| 1 x | Pletina MPX (5 pcs) |
| 1 x | Contacto macho pin conector (10 pcs) |
| 1 x | Helice Carbono 15x13 |
| 1 x | Helice Carbono 11x8 |
| 1 x | Helice Carbono 14.5x10 Slim |
| 1 x | Helice Carbono 12.75x13 |
| 1 x | Conector banana oro 3,5 mm |
| 1 x | Soporte conector MPX hembra (6 pcs) |
| 1 x | Pletina MPX 8 pines (5 uds) |
| 1 x | Conector XT-30 (pareja) |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Funda conector 2 mm |
| 1 x | Conector BEC macho (10 pcs) |
| 1 x | Conector banana oro 4 mm antichispa |
| 1 x | Conector Centralita Optotronix Aurora |
| 1 x | Conector banana oro 0,8 mm |
| 1 x | Conector equilibrado XH (2S) hembra (2 pcs) |
| 1 x | Conector banana oro 5,5 mm antichispa |
| 1 x | Conector banana oro 2 mm (Ultralight) |
| 1 x | Conector 2 mm macho (2 pcs) con conector de seguridad |
| 1 x | Conector banana oro 8,0 mm |
 |
| 34,163.94EUR |
