2 x | PPM Encoder Module |
1 x | PIX Hawk with accesories |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Tube Pitot to PIXHAWK |
1 x | 2,0x50 mm allen screwdriver |
3 x | Z Bender - S Type Tool |
1 x | Screwdriver for Torx® TX6 |
1 x | Crimping tool |
1 x | Starter 12v (Max 90 and 15ccm) |
2 x | Hot Glue Stick BLACK |
1 x | Digital precision scale up to 2000 g |
2 x | Vacuum pump 12 CFM |
1 x | Z Bender - S Type Tool |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Ball Link Plier |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Dust collector for mould cleaning |
1 x | Digital scale up to 40 kg |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Crimping tool |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Starter EM Gear Power 80 |
1 x | |
2 x | Vacuum pump P1-N |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Ferrita con funda |
3 x | USB Mini Camera endoscope |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Ferrita 27x14x7 mm |
2 x | Spray Graphit 33 |
1 x | Xplorer1 anemometro |
1 x | Release wax 250ml |
2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Spray EC Red 400ml |
2 x | Painting GHT Lexan Black 150 ml |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Starter EM Gear Power 250 |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Resistor 3W 5% 2R2 |
1 x | Resistor 3W 5% OR82 |
1 x | Landing lights 18 mm (0.71in) |
2 x | Hot Glue Stick GREEN |
1 x | NF-3 RC set |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Spannlack 1000 ml |
1 x | Partall paste 650 g |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | 1000 ml sealer (DOPE) |
1 x | Paint gun for sprays |
1 x | 20 g tin paste |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Servo MKS HV 777A+ |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
2 x | 90x75 mm standart servo cover |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
2 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Power supply NT 25 Amp. |
1 x | 18 mm wing servo holder |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Servo Dymond D 37 Eco |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Sanyo TX Battery Eneloop 9,6 V 2500 mAh |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Tool for entel |
1 x | Tube bender |
1 x | Motor OS 3820-1200 electric |
1 x | Servo MKS HV1220 |
2 x | Servo FUTABA SBL 471 SV |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Servos security connector (2 pcs) |
1 x | Servo FUTABA S 9670 SV |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Servo TOPMODEL DS1413 T |
1 x | Programador FUTABA USB CIU-3 |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Aluminium servo arm (2 uds) |
1 x | Servo DITEX EL0510M |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | 65 mm mini servo cover |
1 x | SSPS105 Super Hi-Power servo |
1 x | Cover cap drop-shaped paintable 43 mm |
2 x | Interface Realflight Simulator |
2 x | Carbon plate 350x150x1.0 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Heat sink for Optotronix LEDs |
1 x | Side Plate |
1 x | Head lower part |
1 x | Bearing housing |
1 x | Head lower part New |
1 x | Motor wall |
1 x | Head upper part |
1 x | Battery plate |
1 x | Screws flush mount M2 |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Steering lever |
1 x | Nut M2 |
1 x | Rudder |
1 x | Screw M3x16 |
1 x | Xplorer3 anemometro |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Servo MKS 6100 DS |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Tail boom |
1 x | Blade holder center GFK 0,5 mm |
1 x | Screws M1,6x6 Allen |
1 x | Nut M2 securing |
1 x | Rotorshape Elevator |
1 x | Head core |
1 x | Balls 4 mm |
1 x | Rotorhead pushrod |
1 x | Nut M1,6 |
1 x | Wheel keeper washer |
1 x | Blade holder center |
1 x | Blade holder upper |
1 x | Servo Fork |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Washer 2.2×4 |
1 x | Raer wall |
1 x | Tail support (2 pcs) |
1 x | Blade holder lower |
1 x | Side rudder |
1 x | Head core bushing |
1 x | Rotor Mast |
1 x | Head runner |
1 x | 800TVL CMOS camera for FPV |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Pistola termica MH 550 micro |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Heli blades angle measurer |
1 x | Kwik link unmount tool |
1 x | Hot Glue Stick RED |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Precision wrench L100 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Heli digital angle measurer |
1 x | MPX 8 pins plug mold |
1 x | Mold plugs XT-30 |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Mini Lock Grips 2PCS |
1 x | Mini-handed clamp |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Heat Seal Iron |
1 x | MPX plug mold V1 |
1 x | Servo FUTABA BLS172 SV |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Dual Sequencer Gear and Canopy |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Aero shocks |
1 x | Landing gear strap small (4 uds) |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | EasyFLY Addon |
1 x | Flat version carb bend for the ZG 62 |
1 x | Propeller G-Sonic 20x8 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | Angled clevis with threaded rod M3 |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Fail Safe air retract |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Air pressure gauge |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Body for landing gear Ø 4 mm |
1 x | Skies 2x 335 mm + 1x Esqui 250mm |
1 x | Interface Jack Adapter IKARUS |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | GameCommander USB Universal |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Slave-cable USB Easy Sim |
1 x | Balsa panel 1.0x100x1000 mm |
|
10,346.02EUR |