| 3 x | Bird (Aero-naut) |
| 3 x | PIT (Aero-Naut) |
| 1 x | METEOR 1.000 mm kit |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Glases Nimbus "Black" |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Parachutist |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Oratex White 2m |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 2 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | Oracover White 10 m |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Xplorer4 anemometro |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Oracover light Grey 2m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Red smoke canister 140 g |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Spikes Band (5 m) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Marker ties (20 pcs) |
| 1 x | Yellow smoke canister 65 g |
| 2 x | Medidor ángulos y/o incidencias |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | White smoke canister 140 g |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Smoke set "S" |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | Green smoke canister 65 g |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Vacuum pump P1-N |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Oracover Black 10 m |
| 1 x | Glases Flitemaster |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | "M" set |
| 1 x | Glases Aspen |
| 1 x | White smoke canister 65 g |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Oracover Brown 2 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Digital scale up to 40 kg |
| 1 x | |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 2 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Crimping tool |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Crimping tool |
| 1 x | Nitroverdu 500 ml |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Xplorer1 anemometro |
| 2 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Oil FUCHS 1 liter |
| 1 x | Dust collector for mould cleaning |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Tow hook for tug |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | TWIST planeador gomas |
| 1 x | Softshell Hispano Aviación |
| 1 x | Cap Hispano Aviación |
| 1 x | Sebart 2.2 m WHITE/BLUE (SebART) |
| 1 x | ULTRA STICK 30 cc ARF |
| 1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
| 1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
| 1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | ARS 300 91" ARF 2311mm ORANGE |
| 1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
| 1 x | EDGE 540-A 105" (2660 mm) |
| 1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
| 1 x | EDGE 540-A 74" (1880 mm) |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
| 1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | White spinner propeller pleg. 50 mm / 6 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Horn with ball 40x30 |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | Rudder forward 80x28 "type Kato" |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | NF-3XL set |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Smoke pump RCEXL |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | F3A carbon 75 mm spinner for Hacker C-50 |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
| 1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
| 1 x | Extension Arm for Carburetor |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
 |
| 19,037.31EUR |
