| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 2 x | Hexagonal ball head 2.0 x 50 mm |
| 2 x | Crimping tool |
| 1 x | Screwdriver for Torx® TX6 |
| 2 x | 1,5x50 mm allen screwdriver |
| 2 x | Hot Glue Stick BLACK |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 3 x | Digital scale up to 40 kg |
| 1 x | |
| 2 x | 2,0x50 mm allen screwdriver |
| 1 x | Ball Link Plier |
| 2 x | Hot Glue Stick RED |
| 2 x | Screwdriver for Hexagon 1,27mm |
| 2 x | Starter 12v (Max 180 and 30ccm) |
| 2 x | Vacuum pump 12 CFM |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Starter EM Gear Power 80 |
| 1 x | |
| 1 x | Z Bender - S Type Tool |
| 2 x | 2,5x60 mm allen screwdriver |
| 3 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 2 x | Glases Moritz |
| 2 x | Glases Aspen |
| 2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 3 x | Glases Stratus |
| 1 x | Glases Flitemaster |
| 2 x | Glases Nimbus |
| 3 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Glases Nimbus "Black" |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Opale Rucksack |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Paramotor Trike XL |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 1 x | Baseplate servo |
| 2 x | Ball Link Plier |
| 2 x | Digital precision scale up to 2000 g |
| 2 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | PIX Hawk with accesories |
| 1 x | Tube Pitot to PIXHAWK |
| 3 x | PPM Encoder Module |
| 1 x | Blue metalic ball link M2/2 azul (2 pcs) |
| 1 x | Vasa model Catapult |
| 3 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | Bungee HLG Premium |
| 2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 2 x | Short ball link M3 (6 uds) |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | Short ball link M1.6 (6 uds) |
| 2 x | Socket head ball link M3 (2 uds) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Premium servo extension 50cm |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 2 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | 25 mm Sandpaper file |
| 2 x | Fresa corte diamante Ø 2.7mm (bola) |
| 1 x | Swing 1000 |
| 1 x | Tool for entel |
| 1 x | Sub-D Plug Mold |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 2 x | Landing gear retract neumatic (Jet Legend) |
| 1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Shirt Hispano Aviación |
| 1 x | Support Pitot JETI |
| 1 x | Glases Ace |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 2 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 2 x | Recessed MPX connector support (6 pcs) |
| 2 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Oil FUCHS 1 liter |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Xplorer3 anemometro |
| 1 x | Z Bender - S Type Tool |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Landing gear axle Ø 8 mm (2 uds) |
| 1 x | Screwdriver for Torx® TX8 |
| 2 x | Cut tube |
| 2 x | Landing gear axle Ø 4 mm (2 uds) |
| 2 x | 400 Newtons FEMA absorber |
| 1 x | 100 Newtons FEMA absorber |
| 2 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | 6,4x1000 mm 2:1 red termoretract tube |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 2 x | 6,4x1000 mm 2:1 green termoretract tube |
| 2 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 2 x | Ball link M2,5 (10 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | MPX 8 pins plug mold |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | FIALA Propeller 23x8 Electric |
| 1 x | Power supply NT 25 Amp. |
| 1 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | Heli digital angle measurer |
| 1 x | Kwik link unmount tool |
| 2 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 1 x | Program 5v SIO RS 232 |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 3 x | Digital weight, angle and balance meter BASIC |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
| 1 x | Dean-T Plug Mold |
| 1 x | Spinner NUT M6 |
| 2 x | XT-60 Plug Mold |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | Spinner NUT M4 |
| 2 x | Laminating brush 10 mm, pack/ 50 pcs |
| 1 x | Power supply NT 40 Amp. |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | HITEC Power Supply 30A. Max. 540w |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | FIALA Propeller 19x12 Electric |
| 1 x | 20 g tin paste |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | 4,8x1000 mm 2:1 black termoretract tube |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | eFuel 30A Power Supply |
| 1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
| 1 x | PHASOR RACE 2035/4100 1D |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Dremel PERMAGRIT thin lime |
| 2 x | Dremel 3000 130W |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Heli blades angle measurer |
| 1 x | PHASOR RACE 2035/2100 2D |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Combo RAY C3542-1000 + ESC 60A |
| 1 x | Dust collector for mould cleaning |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | FOXY G2 C3530-700 |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Servo Controller Fibra optica |
| 1 x | SERVO DES 588 BB MG |
| 1 x | Mini-handed clamp |
| 1 x | Sealing Iron Profi LCD |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Tool for entel |
| 2 x | Support Filtro FESTO |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Cooler motor type 400 |
| 1 x | Support FUEL DOT V3 |
| 1 x | Mold plugs XT-90 |
| 1 x | Angle support XT60 conector |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Cooler motor type 300 |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | EDGE 540-A 74" (1880 mm) |
| 1 x | Optical RPM Sensor |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | Charging Extension 50cm for 2 Battery |
| 1 x | Mobile Terminal |
| 1 x | PowerBox Battery 4000 |
| 1 x | MicroMatch PowerBox |
| 1 x | PowerBox iGyro SRS + GPS Modul |
| 1 x | PowerBox DigiSwitch V2 JR/JR |
| 2 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1 |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Cable video GoPro and 5V cable |
| 1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
| 1 x | BULLIT Wing 1095 mm |
| 1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART) |
| 1 x | USB Mini Camera endoscope |
| 1 x | Spinner 102 mm |
| 1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | RX cabel |
| 1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Landing gear axle 4x21 4 mm (2 uds) |
| 1 x | MR30 connector male |
| 1 x | Extension Arm for Carburetor |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Spinner 125 mm GFK |
| 1 x | 64 mm aluminium spinner |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
| 1 x | Servo Robbe FS 128 BB MG HV Digital |
| 1 x | Propeller 8x4 Electric |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
 |
| 17,645.77EUR |
