| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | USB Mini Camera endoscope |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 2 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 2 x | Adapter lead MPX/XT60 |
| 1 x | Circlick securite |
| 2 x | 3 LiPo XH>EH adapter |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | 30 cm BEC cable (female) |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 2 x | CM-3 |
| 2 x | ABS tube 5.0x3.0x1000 mm |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 2 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 2 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 3 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 20x200 mm battery rings |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Tape GFK 50 mm |
| 1 x | Tape GFK 25 mm |
| 1 x | Cinta Goldfix 1m |
| 1 x | Spikes Band (5 m) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Marker ties (20 pcs) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Servo Mount M (blue) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Prop Shaft Adapter 5 mm "long" |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Connector CAN 15 |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
| 1 x | RX cabel |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Female connector for 10 pines AWG |
| 1 x | FX three-position switched channel, long |
| 1 x | Male connector for 6 pines AWG |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Short Switch On/Off micro |
| 1 x | CC 02 |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Female connector for 12 pines AWG |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | TrainerCord (master-learner) |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | LA500 pre-rotation gear |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | LA500 pilot-seat set |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 2 x | ABS tube 4.0x3.0x1000 mm |
| 3 x | ABS tube 3.0x2.0x1000 mm |
| 3 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 2 x | ABS tube 3.0x2.0x330 mm |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 2 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | 1/4 Pilot "Mike" |
| 2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | LA500 front gear holder |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | LA500 housing-upper cyclic |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | LA500 Blades |
| 1 x | Retract undercarriage for gliders up to 3,5 Kg |
| 1 x | T-shape holder metal LAMA |
| 1 x | Tailwheel for F3A size |
| 1 x | Tailwheel for 20/60 size |
| 1 x | Retract undercarriage for gliders up to 2 Kg |
| 1 x | Tren de cola carbono 50-70cc |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Support pump Xicoy X45 |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | 20 mm gas motor standoff |
| 1 x | 10 mm gas motor standoff |
 |
| 3,254.57EUR |
