| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Balsa panel 2.5x100x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 2 x | Balsa panel 3.0x100x1000 mm |
| 3 x | Beech dowels 3.0 x 1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 3 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 3 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 3 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 2 x | SE Ring 400 mm (2 pcs) |
| 3 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | SE Ring 450 mm (2 pcs) |
| 3 x | Straightened threaded rod M3 - 1m |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | Ring 320 mm length (5 pcs) |
| 2 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 2 x | 20x200 mm battery rings |
| 2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | SE Ring HACKER 300 mm (2 pcs) |
| 2 x | CC 02 |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (female) |
| 2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 2 x | CC 05 |
| 1 x | CC 01 |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | BEC 3A FOXY |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | CC 03 |
| 1 x | Circlick securite |
| 2 x | 2 LiPo XH>EH adapter |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | TrainerCord (master-learner) |
| 1 x | USB HLS prog. interface |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Servo NARO Max Std |
| 1 x | |
| 1 x | Dean "T" - Futaba Adapter |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 5 LiPo XH>EH adapter |
| 2 x | JETImodel SINGLE BEC |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | 30 cm BEC cable (male) |
| 1 x | CM-3 |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Suncover 100cc Red |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | Tailwheel for 40/90 size |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | SU 29S 140 carbon landing gear |
| 1 x | Indoor landing gear set |
| 1 x | White aluminium 230 mm landing gear |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Landing gear strap medium (4 uds) |
| 1 x | 40 mm air cylinder |
| 1 x | Fail Safe air retract |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | HITEC 20 mm servo arm with ball link |
| 2 x | 10-15mm Servo Arm |
| 1 x | Servo HITEC HS-311 |
| 1 x | Servo case HS-225MG/225BB/5245MG |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | 17 mm servo arm with ball link DES Graupner |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Servo HITEC D145 SW |
| 1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
| 1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
| 1 x | Screws set for Hitec MG arms servo |
| 1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
| 1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
| 1 x | Futaba 52 mm servo arm |
| 1 x | Futaba 30 mm servo rounded arm |
| 1 x | Hitec 46 mm servo arm with ball link |
| 1 x | Gear set HITEC HS-311/322/325BB |
| 1 x | Servo HITEC D-955 TW Titanium |
| 1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
| 1 x | Servo FUTABA S 3071 HV S-Bus |
| 1 x | Servo safety connector (10 pcs) |
| 1 x | Futaba 25 mm servo arm with ball link |
| 1 x | Futaba 46 mm servo arm with ball link |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Hitec 30 mm servo rounded arm |
| 1 x | SAVOX SH 0254 servo |
| 1 x | Servo HITEC D625 MW |
| 1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Hitec 25 mm servo arm with M3 ball link |
| 1 x | Gear set HITEC HS-125MG/5125MG |
| 2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | Hitec 38 mm servo arm with ball link |
| 1 x | Servo FUTABA BLS173 SV |
| 1 x | Hitec 20 mm servo arm |
| 1 x | Servo KST X10-710 V8.0 7.5Kg HV |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Servo GO-02 Digital 1.8g |
| 1 x | HV6150 Digital Servo |
| 1 x | Servo MKS HV1220 |
| 1 x | SERVO DES 806 Pignons |
| 1 x | Servo MKS HV747 |
| 1 x | Servo HBS 690BB HV Digital |
| 2 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 3 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | PSC 6 |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Tape GFK 38 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Extension 5 lipos JST/C |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 3 x | Marker ties (20 pcs) |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | |
| 1 x | Long Switch On/Off micro |
| 1 x | Switc electronic 30 Amp |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 2 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | SE Ring 200 mm (2 pcs) |
| 2 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | SPS 70V 100/200 A |
| 1 x | Spikes Band (5 m) |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Tape GFK 25 mm |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Tape GFK 50 mm |
| 2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 2 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | SBEC 30 D |
| 2 x | Opto Gas Engine Kill Switch |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | SPARK Switch 12v |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Propeller MASTER 7x4 |
| 1 x | Propeller MEJLIK 18x8 CFK |
| 1 x | Propeller MASTER 5,5x4,5 |
| 1 x | Ignition RM-25V |
| 1 x | 50N turbine start protection tube |
| 1 x | RM-85FSI 4-stroke inline gasoline engine |
| 1 x | Receiver bed (Blue) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Servo Mount M (blue) |
| 1 x | Motor mount M |
| 1 x | PYRO 700-56L |
| 1 x | AXI 2212/26 V2 |
| 1 x | KIRA 500-36 6,7:1 |
| 1 x | KIRA 600-22 6,7:1 |
| 1 x | AXI 2820/8 V2 Long |
| 1 x | AXI 2826/12 V2 Long |
| 1 x | KIRA 480-26 5,2:1 |
| 1 x | Propeller MASTER 6x4 |
| 1 x | Propeller POWER-PROP 12x8 |
| 1 x | 28x12 prop Super Silence |
| 1 x | Propeller MASTER AIRSCREW 13x6 |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | Propeller MASTER 7x3 |
| 1 x | 27x10 prop Super Silence |
| 1 x | 11x7 tree blades propeller |
| 1 x | 3-blades 21x12carbon prop Super Silence |
| 1 x | 3-blades 20x10 carbon prop Super Silence |
| 1 x | 26x12 prop Super Silence |
| 1 x | Propeller MEJLIK 20x8 CFK |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Motor ROTO-35 FS BM 4T |
| 1 x | RM-130FSI 4-stroke inline gasoline airplane 3 cylinder |
| 1 x | Ring support P-20 OPUS V-Jet 60mm |
| 1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
| 1 x | Tank GFK Opus/JEt 300 ml |
| 1 x | Motor OS 3805-1200 electric |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Servo Mount S (red) |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Rudder 2_Tray 3.5~4 inch |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Rudder 2_Tray 4.5~5 inch |
 |
| 12,785.96EUR |
