| 1 x | Oracover Azul Cielo 2 m |
| 1 x | Oracover Yellow CADMIO 2 m |
| 1 x | Oracover Orange 2 m |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Oratex Antik 2m |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Ply-Span 450x600/13g White |
| 2 x | Oracover Black 2 m |
| 1 x | Oracover White 10 m |
| 1 x | Oratex Red Fokker 10 m |
| 2 x | Ply-Span 450x600/13g Black |
| 2 x | Ply-Span 450x600/13g Orange |
| 1 x | Oracover CHROME 2m |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | Oracover Red 2 m |
| 2 x | Oracover Brown 2 m |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | Oracover White 2 m |
| 2 x | Ply-Span 450x600/13g Blue |
| 1 x | ORACOVER Ferrari red (2 m) |
| 2 x | Oratex Natural White 20m |
| 2 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Cap Hispano Aviación |
| 1 x | Softshell Hispano Aviación |
| 1 x | Shirt Hispano Aviación |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | Ring 320 mm length (5 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Marker ties (20 pcs) |
| 2 x | SE Ring 360 mm (2 pcs) |
| 2 x | Cinta Goldfix 1m |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 2 x | Tape GFK 38 mm |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | JETImodel SINGLE BEC |
| 1 x | CM-3 |
| 1 x | TrainerCord (master-learner) |
| 2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | USB HLS prog. interface |
| 1 x | CC 01 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | 30 cm BEC cable (male) |
| 2 x | 30 cm BEC cable (female) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 2 x | Dean "T" - Futaba Adapter |
| 1 x | CC 02 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Motor A2212/13T |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | Oratex Natural White 2m |
| 2 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support pump Xicoy X45 |
| 1 x | Surface Indicator Gauge Small |
| 2 x | 3 LiPo XH>EH adapter |
| 2 x | BEC 3A FOXY |
| 1 x | Nut for mounting M3 (4 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 20x200 mm battery rings |
| 1 x | Jet Afterburner Simulator NF-Jet3 RY |
| 1 x | Hexagonal Nut M3 (10 pcs) |
| 1 x | NF-2 RC set |
| 1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Blind nut M4 (4 pcs) |
| 1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
| 1 x | Blind nut M2 (10 pcs) |
| 1 x | Blind nut M5 (4 pcs) |
| 1 x | Blind nut M3 (4 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Nut for mounting M2,5 (4 pcs) |
| 1 x | Threaded insert M3 (4 pcs) |
| 1 x | Lock nut M3 (10 pcs) |
| 1 x | Blind nut M8 (10 pcs) |
| 1 x | Lock nut M2.5 (10 pcs) |
| 2 x | Jet Afterburner Simulator NF-Jet4 RY |
| 1 x | Blue Aluminium lock nut M2 (4 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 1 x | Oracover Azul 2 m |
| 1 x | Hexagonal Nut M1,6 (10 pcs) |
| 1 x | SPARK Switch 12v |
| 1 x | DPSI Ampere battery backer |
| 1 x | Short Switch On/Off micro |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | 28 mm tailwheel unit |
| 1 x | Retract undercarriage |
| 1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
| 1 x | Tail wheel for 8-12 kg models |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Skies 2x 335 mm + 1x Esqui 250mm |
| 1 x | Tailwheel for 1-3 kg models |
| 1 x | Three-position switched channel, short |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
| 1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Male connector for 10 pines AWG |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Male connector for 6 pines AWG |
| 1 x | UBEC 6A KAVAN |
| 1 x | CC 03 |
| 1 x | USB interface ALTIS |
| 1 x | Connector CAN 15 |
| 1 x | Multi-adapter balancer JST - TP |
| 2 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | PVC transparent battery termo-retract 195 mm (1 m) |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
| 1 x | 2,4x1000 mm 2:1 red termoretract tube |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 2 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
| 1 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | BULL MØ1 2.600mm GREEN |
| 1 x | Green smoke canister 140 g |
| 1 x | Micro Tarjeta SD Rapid Rush 16 GB |
| 1 x | Cable video GoPro and 5V cable |
| 1 x | ULTIMATUM 2.0 m green/black |
| 1 x | ULTIMATUM 2.0 m yellow/blue |
| 1 x | ULTIMATUM 2.0 m red/black |
| 1 x | ULTIMATUM 2.0 m orange/blue |
| 1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
| 1 x | BULL MØ1 2.600mm ORANGE |
| 1 x | Canopy BULL MØ1 2.600mm |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Smoke set "M" |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Smoke set "Glider" |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Green smoke canister 100 g |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Yellow smoke canister 140 g |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | PVC transparent battery termo-retract 70 mm (10 m) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Receiver bed (Blue) |
| 1 x | PVC lilac battery termo-retract 70 mm (10 m) |
| 1 x | Actuator Electric 25 mm HIGH TORQUE |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Female connector for 16 pines AWG |
| 1 x | JETImodel Addcap 1640 |
| 1 x | PSC 5 |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Cable video GoPro |
| 1 x | USB Interface Adapter |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
 |
| 30,850.24EUR |
