| 2 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 5 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 3 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | Pine wood slat 10x10x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 3 x | Cable Cargador FUTABA |
| 2 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 2 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 3 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 2 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 2 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | Xplorer2 anemometro |
| 2 x | Xplorer1 anemometro |
| 1 x | Xplorer4 anemometro |
| 2 x | Xplorer3 anemometro |
| 1 x | 18 mm reinforced hinge |
| 2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 3 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Gates hinge |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Partall paste 650 g |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | A/C quality beech plywood 600x300x6.0 mm |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 2 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 2 x | Balsa panel 5.0x100x1000 mm |
| 2 x | BALSA trip 10x10x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Support XT60 conector (2 pcs) |
| 2 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 2 x | Pine wood slat 3.0x7.0x1000 mm |
| 2 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Small pinned hinge (12 uds) |
| 2 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 2 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 2 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 2 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
| 1 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 2 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
| 1 x | MPX plug mold V1 |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | Mold plugs XT-30 |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Sub-D Plug Mold |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 2 x | Protective Cover for wires Ø 3 mm 1000 mm |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 2 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 2 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Small Crow DLE-170M |
| 1 x | Motor DLE 200cc Std |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Propeller diller 5/6,3/8/9 |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | Silicone red 1,0 qmm wire ( 1 m) |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | Battery RX JETI LiIon RB 2600 7.2v |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
| 1 x | DUPLEX 2.4EX Central Box 220 |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | DUPLEX 2.4EX RC Power Switch 10 |
| 1 x | Cyano INSTA - CURE™ Pocket (18g) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Cyano SUPER - GOLD™ (12g) |
| 1 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Cyano SUPER - GOLD™ Pocket (18g) |
| 1 x | Cyano INSTA - CURE™ (56g) |
| 1 x | Epoxy SLOW-CURE™ 30 min (260g) |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | Silicone red 1,0 qmm wire (100 m) |
| 2 x | Silicone red 1,5 qmm wire ( 1 m) |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
| 1 x | Silicone red 0,75 qmm wire ( 1 m) |
| 1 x | Silicone black 6,0 qmm wire ( 1 m) |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | DC24 II Transmitter case insert |
| 1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
| 1 x | DUPLEX 2.4EX MUI 150 Sensor |
| 1 x | DUPLEX 2,4GHz MRPM-AC EX |
| 1 x | Battery RX JETI LiIon RB 5200 7.2v |
| 1 x | Black tray 2,4EX DC-16/14/24 black |
| 1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | Catalyst INSTA - SET™ (60g) |
| 1 x | ExtraCA Top |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Thread locker IC-Loc™ red "high" 10 ml |
| 1 x | FOAM - CURE™ (24g) |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Catalyst INSTA - SET™ (235g) |
| 1 x | Epoxy FINISH-CURE™ 20 min (130g) |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Cyano INSTA - CURE™ (225g) |
| 1 x | Cyano INSTA - FLEX+™ (25g) |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Epoxy SLOW-CURE™ 30 min (130g) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Silicone red 2,5 qmm wire ( 25 m) |
| 1 x | Silicone red 4,0 qmm wire (25 m) |
| 1 x | Silicone red 0,75 qmm wire ( 25 m) |
| 1 x | Epoxy 40 min (Resin). 25Kg |
| 1 x | Epoxy 10 min 190g |
| 1 x | Servo Mount M (blue) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Epoxy 40 min. 4kg (Hardener) |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Round flex hinge (12 uds) |
| 2 x | Epoxy 5 min. 500 g (Resin) |
| 1 x | Epoxy 5 min. 200g |
| 1 x | Epoxy 40 min (Resin). 5 Kg |
| 1 x | Epoxy 5 min. 500 g (Hardener) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Epoxy Resin L + Hardener LT kit/ 895g |
| 1 x | Epoxy 30 min. 200g |
| 1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
| 1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
| 2 x | Small flex hinge (12 uds) |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
| 1 x | Robart Door Hinge (Pk2) |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Motor mount M |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Receiver bed (Blue) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Servo Mount S (red) |
 |
| 10,421.73EUR |
