| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 2 x | Round Rod 1,25x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Angle of incidence meter |
| 2 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | WingFix ULTRA Black Edition |
| 2 x | Field folding model stand |
| 1 x | Propeller balancer |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Xplorer3 anemometro |
| 1 x | Oil FUCHS 1 liter |
| 2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Baseplate servo |
| 2 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Xplorer2 anemometro |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Dust collector for mould cleaning |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 2 x | Glases Innovation Plus |
| 3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Glases Ace |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Premium servo extension 75cm |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Premium servo extension 100cm |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 2 x | Cable video GoPro |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Glases Aspen |
| 1 x | Blades 330mm |
| 1 x | Angle measurer |
| 1 x | Glases Stratus |
| 1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | 460 mm EPP Floats |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 2 x | Glases Moritz |
| 1 x | 38 mm aluminium spinner. |
| 1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | 40 mm air cylinder |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | 75 mm INO spinner (carbon imitation) |
| 1 x | 75 mm spinner (Carbon Imitation) |
| 1 x | 76 mm aluminium spinner. |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Bags MB-339 (Wings & Elevators) |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
| 1 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
| 1 x | Glases Nimbus |
| 1 x | Glases Flitemaster |
| 1 x | Carbon plate 500x400x2.0 mm ISOTECH |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | 57 mm INO spinner (carbon imitation) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 3 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | 70x23 Ø3.5 mm aluminium core wheel |
| 2 x | MR30 connector male |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 1 x | Antenna holder bracket double |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Suction funnel for carburetor 90D-M (red) |
| 1 x | Spark plug key NGK MVVS |
| 1 x | Sparkplug ROSSI R8 |
| 2 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | NF-1 RC set |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | Heat sink for Optotronix LEDs |
| 1 x | Spark motor OS nº 3 |
| 1 x | Sparkplug 1/4-32 |
| 1 x | Reed valve cage with petals for DA 100/150 |
| 2 x | Crankshaft DA-120 |
| 1 x | Steel conrod DA-50R and DA-60 |
| 1 x | Piston pin for DA50R/DA100 |
| 2 x | Rear crankcase DA-50R |
| 1 x | Carburator spacer block DA-50R |
| 1 x | Ignition unit for DA-70/100/120/150/170/200 |
| 1 x | Reed valve carrier, without reed valves DA-150L/170 |
| 1 x | Low speed needle DA-50R/100I |
| 1 x | Cylinder for DA-85/170 (1 piece) |
| 1 x | Reed valve for DA 50-R |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 1 x | FIALA Propeller 19x12 Electric |
| 1 x | NF-3X-350 set |
| 1 x | Jet Afterburner Simulator NF-Jet2 |
| 1 x | Resistor 3W 5% OR47 |
| 1 x | Sparkplug 1/4-32 Glow |
| 1 x | Stainless steel silencer for DA 150/150L |
| 1 x | Resistor 3W 5% 2R2 |
| 1 x | Sparkplug 1/4-32 EVO 10GX |
| 1 x | Jet Afterburner Simulator NF-Jet2YY Set |
| 1 x | Jet Afterburner Simulator NF-Jet3 RYS |
| 1 x | LED blink wire flashing (white - 2pcs) |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | Cooler motor type 300 |
| 1 x | AXI 2814/10 V2 |
| 1 x | AXI 2826/8 V2 Long |
| 1 x | AXI 4120/14 V2 |
| 1 x | AXI 2212/26 V2 |
| 1 x | Cable video GoPro and 5V cable |
| 1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | Motor mount for 1 m models |
| 1 x | Motor Mount for Multiplex FunJet |
| 1 x | Electric coversion set |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | Bearings for motor HACKER C50 |
| 1 x | Cooler motor type 150 |
| 1 x | Combo AM480 T-Motor 650 Kv |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Size "M" motor holder for class 600 |
| 1 x | Fan for A60 |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Receiver bed (Blue) |
| 1 x | Size "L" motor holder for class 600 |
| 1 x | Central support Speed 600 |
| 1 x | Hacker A30-S Radial Set |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Ø 38 mm fiberglass motor-holder for electric motors |
| 1 x | Motor mount M |
| 1 x | Frontal support Speed 280 |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | Motor holder for AC 28/7 |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Frontal support Speed 400/480 |
| 1 x | Motor holder AXI |
| 1 x | AXI 2814/10 V2 Long |
| 1 x | AXI 2820/10 V2 |
| 1 x | AXI 2820/8 V2 |
| 1 x | AXI 2212/20 V2 |
| 1 x | AXI 2217/20 V2 |
| 1 x | AXI 2814/20 V2 Long |
| 1 x | AXI 2814/12 V2 |
| 1 x | AXI 2212/12 V2 |
| 1 x | AXI 2820/10 V2 Long |
| 1 x | AXI 2808/20 V2 |
| 1 x | AXI 2826/10 V2 Long |
| 1 x | AXI 2217/20 V2 Long "F5J" |
| 1 x | AXI 2217/12 V2 |
| 1 x | AXI 2820/14 V2 Long |
| 1 x | AXI 2808/24 V2 Long |
| 1 x | AXI 2814/20 V2 |
| 1 x | AXI 2820/8 V2 Long |
| 1 x | AXI 2826/6 V2 |
| 1 x | AXI 2826/6 V2 Long |
| 1 x | TX 250 mW especial GOPRO |
| 1 x | Micro Tarjeta SD Rapid Rush 16 GB |
| 1 x | Shirt Hispano Aviación |
| 1 x | Z Bender - S Type Tool |
| 1 x | White aluminium 230 mm landing gear |
| 1 x | Universal Filter |
| 1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Spinner fixed propeller 42 mm / 5,0 mm |
| 1 x | Spinner fixed propeller 60 mm / 5,0 mm |
| 1 x | Crystal Universal RX 35.090 Ch 69 |
| 1 x | Carburator Moki S400 |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | RX cabel |
| 1 x | EDGE 540 1.73m SEAGULL Model |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Extension 7.5 cm |
| 1 x | LED blink wire flashing (blue - 2pcs) |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Softshell Hispano Aviación |
| 1 x | Cap Hispano Aviación |
| 1 x | Tray for FUTABA 18 SZ |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | 51 mm INO spinner (carbon imitation) |
| 1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | DLE Ignition unit |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | 35 mm gas motor standoff |
| 1 x | ULTIMATUM 2.0 m white |
 |
| 13,519.44EUR |
