3 x | Jet Afterburner Simulator NF-Jet2YY Set |
4 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | NF-3X-80 liner Kit |
1 x | Jet Afterburner Simulator NF-Jet2 |
3 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
3 x | NF-3m Heli Kit |
1 x | Propeller balancer |
2 x | Surface Indicator Gauge Small |
1 x | WingFix ULTRA Black Edition |
2 x | Propeller balancer |
1 x | Angle measurer |
1 x | Bungee HLG Premium |
1 x | Angle of incidence meter |
1 x | Medidor ángulos y/o incidencias |
1 x | Field folding model stand |
1 x | Dean "T" - Futaba Adapter |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
2 x | AX-60 starters (5 pcs) |
2 x | Yellow smoke canister 140 g |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Green smoke canister 140 g |
2 x | Circlick securite |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 2 LiPo XH>EH adapter |
1 x | Green smoke canister 100 g |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
3 x | B4-0 rocket charges (6 pcs) |
1 x | BEC 3A FOXY |
1 x | Remote electric ignition system |
2 x | Electric rocket starters (6 pcs) |
1 x | Adapter lead MPX/EC3 |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
3 x | Smoke set "M" |
1 x | Initior Receiver FRX2 Wireless |
2 x | Smoke set "S" |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Cabel charger transmitter GRAUPNER |
1 x | "M" set |
1 x | Adapter lead MPX/XT60 |
1 x | White smoke bombs AX-3 (10 pcs) |
2 x | USB HLS prog. interface |
1 x | Blue smoke canister 140 g |
1 x | 3 LiPo XH>EH adapter |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Hovercraft sailcloth |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | 15 mm reinforced hinge |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | Cooler motor type 400 |
1 x | Servo slow down unit (0,7-14,7 sec ) |
2 x | TMM 1210-3S heli |
3 x | NF-1 RC set |
1 x | Cooler motor type 150 |
1 x | Swing 1000 |
3 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | AX-60 starters (5 pcs) |
1 x | MPX Sub-D Adaptor |
1 x | Flybar support metal LAMA |
1 x | LED blink wire flashing (red - 2pcs) |
2 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | NF-3XL set |
1 x | NF-3X-350 set |
2 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Field folding model stand SebArt |
1 x | Vasa model Catapult |
1 x | PPM Encoder Module |
1 x | PIX Hawk with accesories |
1 x | ESC MEZON 115 Opto |
1 x | Racor 2/3 mm |
2 x | Quicklock washer 4 mm (10 pcs) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
2 x | Circlik for shaft 2.3 mm (10 pcs) |
2 x | Flat washer 1.7 mm (20 pcs) |
2 x | M3-M4 rubber washer (8 pcs) |
2 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | F3A carbon 85 mm spinner for AXI |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Interruptor RX/Batterie |
1 x | Parachute expulsion foam |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | PSC 5 |
1 x | Red smoke canister 65 g |
1 x | Heat sink for Optotronix LEDs |
1 x | Red smoke canister 140 g |
1 x | PCARD Wireless System |
1 x | EWC3 40 cm wing connector |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | 30 cm BEC cable (female) |
1 x | White smoke canister 140 g |
1 x | |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Actrocon 60A ESC |
1 x | FunCub NG azul RR |
1 x | Axi for MVVS 3.5 Sport |
1 x | Motor Set CHALLENGER Indoor |
1 x | CHALLENGER Indoor |
1 x | Potenciometro micro |
1 x | FUNRAY RR |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
2 x | Flat washer 3.2 mm (20 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
1 x | Xoar Electric Beechwood Prop 21x10 |
2 x | Flat washer 2.2 mm (20 pcs) |
2 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | F3A carbon 80 mm spinner for Spark EVO |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Socket Head Screw M2x10 |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | Screw M3x5 (10 pcs) |
1 x | Screw M3x12 (10 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | SPARK Switch 5.9v |
1 x | Male connector for 6 pines AWG |
1 x | JETImodel Addcap 1640 |
1 x | Selfstart electronic switch |
1 x | Male connector for 10 pines AWG |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | PROFI TX fastening rings |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | Propeller Pleg CAM Carbon 10x7 |
1 x | Propeller Pleg CAM Carbon 12x10 |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Refueling Cap V3 Black |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Modulo reglaje avance V3 |
1 x | JETI SPIN 80 Pro |
1 x | Turbina X132 H "Compact Version" |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Captador RCEXL para DA |
1 x | Hopper 125 ml XICOY with support |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Propeller Pleg CAM Carbon 10x4 |
2 x | Screw M3x16 (10 pcs) |
1 x | Pan head screw M2x16 PH |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Blind nut M6 (4 pcs) |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Screw M2x6 (10 pcs) |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Blind nut M5 (4 pcs) |
1 x | Socket Head Screw M2x5 |
2 x | Screw M3x20 (10 pcs) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Socket Head Screw M2x8 |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Socket Head Screw M2,5x12 |
2 x | Quicklock washer 2 mm (10 pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Blind nut M4 (4 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Screw M3x8(10 pcs) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Pan Head Screw M2x6 PH |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Socket Screw M3x9 mm |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Female connector for 20 pines AWG |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | SPARK Switch 12v |
1 x | JETImodel SINGLE BEC |
1 x | Female connector for 12 pines AWG |
1 x | SPS 70V 140/280 A |
1 x | Opto Gas Engine Kill Switch |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Mini neumatic retract landing gear |
1 x | White aluminium 230 mm landing gear |
1 x | 40 mm air cylinder |
1 x | Tren de cola carbono 50-70cc |
1 x | Tailwheel for 20/60 size |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Switc electronic 30 Amp |
1 x | Long Switch On/Off micro |
1 x | FX three-position switched channel, long |
1 x | Extension 5 lipos JST - JST/C |
1 x | MAX BEC 2D plus EX |
1 x | Extension 2/3 lipos JST/C |
1 x | MAX BEC |
1 x | SPS 70V 100/200 A |
1 x | CC 01 |
1 x | Cabling for Fox MDM1 wings |
1 x | Extension 5 lipos JST/C |
2 x | EWC6 40 cm wing connector |
1 x | Extension 6 lipos XH > EH |
1 x | Three-position switched channel, short |
1 x | Bearing block for noseleg landing gear |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Tail wheel for 5-8 kg models |
1 x | Retract undercarriage |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Hose connector stopper 4 mm |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Air pressure gauge |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Indoor landing gear set |
1 x | 28 mm tailwheel unit |
1 x | Tailwheel for 1-3 kg models |
1 x | Tail wheel for 8-12 kg models |
1 x | Tailwheel for 40/90 size |
1 x | Kit hydraulic brake |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | Brake for 140 mm wheels |
1 x | Actuator Electric 25 mm |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
|
19,224.89EUR |