| 1 x | Vasa model Catapult |
| 1 x | Red smoke canister 140 g |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Blue smoke canister 140 g |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | White smoke canister 100 g |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Smoke set "S" |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | One touch canopy lock |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | "S" set for boats |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Yellow smoke canister 100 g |
| 2 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | Green smoke canister 100 g |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Covered closure or fairings |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Remote electric ignition system |
| 1 x | AX-60 starters (5 pcs) |
| 2 x | Ventral support for AX-18/AX-60 |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 2 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Conector Servo female 4 pines |
| 2 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Propeller balancer |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Angle of incidence meter |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Angle measurer |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 2 x | 25 mm reinforced hinge |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Surface Indicator Gauge Small |
| 2 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Gates hinge |
| 1 x | 15 mm reinforced hinge |
| 1 x | Propeller balancer |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 2 x | Flap hinge (6 pcs) |
| 1 x | Field folding model stand |
| 3 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | EC-Cutter |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | Cockpit plastic closing |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Conector BEC female (10 pcs) |
| 2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Green smoke canister 65 g |
| 1 x | Parachutist |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | PCARD Wireless System |
| 1 x | Red smoke canister 65 g |
| 1 x | Blue smoke canister 100 g |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | Cockpit metalic closing |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Servo HITEC D950 TW |
| 1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Servo HITEC D645 MW |
| 2 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Conector MT-60 (pair) |
| 1 x | MPX Support |
| 2 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Kontronik connector (10 connectors, 5 pairs) |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | XT-60 connector (female) |
| 1 x | MPX PCB "4 Pins", 5 pieces |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | MPX PCB "6 Pins", 5 pieces |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | XH LiPo extension lead |
| 1 x | Wing conexion 2 servos JR/Graupner 50 cm |
| 1 x | Conector XT-30 (macho) |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Servo HITEC HS-55 |
| 1 x | Servo HITEC D625 MW |
| 1 x | Servo SAVOX SW-1250 MG digi |
| 1 x | Servo SAVOX SH 0257 MG |
| 1 x | Piñones SAVOX SH-0350 |
| 1 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | SAVOX SH 0255 MG servo |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Servo HITEC HS-5245 MG Digi |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Servo SAVOX SA-1256 TG |
| 1 x | Servo HITEC HS-325 BB |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Servo HITEC HS-5485 HB Digi |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Mounting frame MPX male connector |
| 1 x | Mounting frame MPX female connector |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | XT-60 connector (male) |
 |
| 5,130.25EUR |
