1 x | Motor A2212/13T |
2 x | Small aluminium horn red (2pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Horn for flap control (1 pcs) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Threaded coupler M3 (10 uds) |
3 x | Brass control horn M4 short for wire (4 pcs) |
1 x | 2,3 mm Prop Adapter M5 |
1 x | LH long aluminium horn L31xH30 (2pcs) |
3 x | Horn 6/35 with M3 Bearing |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Adapter 3,0 mm M6 |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Ventus 1:4 set of instruments |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Extension 7.5 cm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Optical RPM Sensor |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Straightened threaded rod M2-1m |
1 x | Extension 90 cm (Futaba) |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Cabel "Y" 15 cm |
1 x | Futaba Female 40 cm extension |
1 x | Extension 100 cm (Futaba) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Cockpit plastic closing |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Gold antispark 4 mm plug |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Starter EM Gear Power 80 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Tape GFK 50 mm |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Copier 5x20 cm pcs |
1 x | Copier 2x20 cm pcs |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Release wax 250ml |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
2 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | UHU Por 50ml/40g |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | CA Glue (medium) 20g |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Conector BEC male (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | UHU hart 35 g |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Hardener Aero EPH 161 (250 g) |
2 x | Horn mando long (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Pegamento Pu R 50g polyuretano |
1 x | FOAM - CURE™ (24g) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Epoxy 5 min. 500 g (Resin) |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Horn with ball 55x40 |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Horn 6/20 with M3 Bearing |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Epoxy 10 min 190g |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
2 x | 20 mm carbon horn |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Control horn long w/ball |
2 x | 6 mm aluminium horn with patella |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Horn DUBRO 1/2A |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | 6 mm M3 variable horn |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Horn 5/10 with M2 Bearing |
|
10,282.47EUR |