1 x | Heat sink for Optotronix LEDs |
1 x | Resistor 3W 5% OR47 |
1 x | Resistor 3W 5% OR82 |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Combo lighting module with covering drop shape |
1 x | Resistor 3W 5% 2R2 |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Hovercraft sailcloth |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
3 x | Vacuum bag, 1200 mm x 50 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Horn 6/35 with M3 Bearing |
1 x | 20 mm carbon horn |
3 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 5/10 with M2 Bearing |
3 x | Horn with ball 55x40 |
1 x | Cable with accesories |
1 x | 6 mm aluminium horn with patella |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Horn 20x28,5 mm (2 pcs) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Horn 6/27 with M3 Bearing |
2 x | Small aluminium horn red (2pcs) |
3 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Ball link Aluminio M3 (2 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler M3 (10 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Angled clevis with threaded rod M3 |
1 x | Couple M4 for wire (10 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Conector BEC female (10 pcs) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | 15 mm reinforced hinge |
1 x | Extension silicon 100 cm (Futaba) |
1 x | IKARUS plane |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Catalog AERO-NAUT 2016 |
1 x | Mounting base Ms 8 mm |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Anchor 80 mm (2 uds) |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Ancla 16 mm (2 pcs) |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | 75 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Anchor of tow Met. 60 mm |
1 x | Stick coupler Ms 15 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Horn 6/20 with M3 Bearing |
2 x | Long extra-strong control horn with bearing 2,8x34 |
3 x | Glass fibre sleeve Ø 20 mm X 20m |
3 x | Micro control horn T2 Ø 1 |
1 x | Brass control horn M2 short for wire (2 pcs) |
3 x | RH long aluminium horn (2pcs) |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
2 x | Long horn 50x26 |
1 x | Horn with ball 40x30 |
1 x | Brass control horn M2 large for wire (2pcs) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Magnetic Connect locking system |
2 x | Filler Gauges |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Tacometer mini ignition RCEXL |
1 x | DLA 116 crankshaft |
2 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Metal clevis M3 (10 uds) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Micro clevis (10 uds) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Connectors MPX black female |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Connectors MPX male |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Reflector 18 mm (2 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
2 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Pulley brass 16/2 (2 pcs) |
3 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Oracover CARBON Metalic 1 m |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
4 x | Propeller FIALA 15x8 3-Blade |
1 x | PT 20x13 EL Propeller |
1 x | Release wax 250ml |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
3 x | Propeller 10x4,7 SlowFlyer |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Propeller 9x7 SlowFlyer |
1 x | PT 16x10 E Propeller |
1 x | CA Glue fast 20g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | 38 mm fenders (10 pcs) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
1 x | Chopped glass fibre strands 3 mm |
1 x | Short adjustable control horn 3x24 |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Horns indoor |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Long adjustable control horn with bearing |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | 290 mm M5 Prop shaft |
2 x | PVC grid straight 290x185x0.32 mm |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Escalera gris 12x60 mm |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Ball Bearings for motor A60-V2 |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Long adjustable control horn 3x34 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Micro control horn (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Indoor hinge with servo arm integraded |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Small adjustable control horn with bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | METEOR 1.000 mm kit |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Fuel line plug Large 2 pcs |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Propadapter for motor A50 |
1 x | Cable coupler M2 (10 uds) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Ply-Span 450x600/13g Black |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | SIG Coverall 1.2x4.5 m |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Ply-Span 450x600/13g Orange |
1 x | Propadapter for motor A50-V3 |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Cable coupler M3 (10 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | 18x6 BIELA propeller |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | Propeller MENZ-S 18x12 |
1 x | Propeller MASTER 6x3 |
1 x | REVOLTO Blue |
1 x | EDGE 540 V3 (Superlite) ORANGE |
1 x | FIALA Propeller 26x10 |
2 x | PT 21x13 EL Propeller 3 Blade |
1 x | PT 22x10 EL Propeller |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | SIG Coverall 1.2x1.8 m |
1 x | 22x10 BIELA pusher propeller |
1 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | 24x12 BIELA 3Bl propeller (3-blades) |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Propeller POWER-PROP 12x6 |
1 x | Propeller MENZ-S 20x9 |
1 x | 8x6 tree blades propeller |
1 x | Propeller MASTER 7x6 |
1 x | FIALA Propeller 18x10 |
1 x | Equipment set XL |
1 x | EXTRA 300L 1.2 m Blue |
1 x | Crack TURBO Beaver Blue |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | 23x8 BIELA propeller |
1 x | 22x8 BIELA propeller |
1 x | 18x10 BIELA pusher propeller |
1 x | 19x8 BIELA propeller |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
1 x | 16x8 BIELA propeller (4-blades) Corsair Scale |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | 26x8 BIELA propeller |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | 22x10 BIELA propeller |
1 x | 23x10 BIELA propeller |
1 x | Propeller MENZ-S 16x8 |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Propeller 3x2 |
1 x | Propeller POWER-PROP 16x10 |
1 x | Propeller MENZ-S 21x12 |
1 x | Propeller MASTER 6x3,5 |
1 x | Propeller MASTER 7x3 |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller MENZ-S 16x10 |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | Propeller MENZ-S 21x10 |
1 x | 24x12 prop Super Silence |
1 x | Propeller MENZ-S 19x10 |
2 x | PT 21x13 EL Propeller |
1 x | FIALA Propeller 24x10 |
1 x | FIALA 22X8 BLACK WOODEN 3-BLADE PROPELLER (GAS) |
1 x | FIALA Propeller 16x6 |
1 x | MXS-C (Mini) Blue |
1 x | FIALA Propeller 24x8 |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
|
13,710.53EUR |