1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
2 x | SE Ring 480 mm (2 pcs) |
2 x | SE Ring 400 mm (2 pcs) |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Cinta Goldfix 1m |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
3 x | SE Ring 350 mm (2 pcs) |
1 x | Tape GFK 25 mm |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Foil for sticking flaps and ailerons |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Tape GFK 50 mm |
1 x | SE Ring 250 mm (2 pcs) |
2 x | Ring 320 mm length (5 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
3 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Ferrita 17x10x6.5 mm |
2 x | Brass control horn M3 short for wire (2 pcs) |
3 x | Horn 5/20 with M2 Bearing |
1 x | LH long aluminium horn L31xH30 (2pcs) |
3 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Small aluminium horn blue (2pcs) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Ball Link Plier |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Screwdriver for Hexagon 1,27mm |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Hot Glue Stick BLACK |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Digital scale up to 40 kg |
1 x | |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
2 x | Vacuum pump 12 CFM |
2 x | Crimping tool |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Z Bender - S Type Tool |
2 x | Hot Glue Stick RED |
1 x | Copier 2x20 cm pcs |
1 x | Copier 5x20 cm pcs |
2 x | 2,5x60 mm allen screwdriver |
1 x | Cut tube |
2 x | 1,5x50 mm allen screwdriver |
1 x | Screwdriver for Hexagon 1,5mm |
2 x | Screwdriver for Torx® TX8 |
1 x | Digital precision scale up to 2000 g |
2 x | Screwdriver for Torx® TX6 |
1 x | Starter Sullivan-STAR 601 |
2 x | Dust collector for mould cleaning |
2 x | Crimping tool |
2 x | Starter 12v (Max 180 and 30ccm) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Ball Link Plier |
1 x | Propeller electric carbon 9.5x6 |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller electric carbon 8.5x7 |
2 x | PT 16x10 E Propeller |
1 x | Propeller electric carbon 8.5x6 |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller electric carbon 6x5 |
1 x | Propeller electric carbon 10.5x6 |
1 x | Propeller electric carbon 6.5x4 |
1 x | Propeller electric carbon 9.5x5 |
2 x | PT 21x13 EL Propeller |
1 x | Propeller POWER-PROP 14x9 |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller POWER-PROP 12x6 |
2 x | Propeller POWER-PROP 10x7 Izda |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller electric carbon 10.5x7 |
1 x | Propeller electric carbon 10x7 |
1 x | PT 22x10 EL Propeller |
1 x | Propeller POWER-PROP 14x10 |
1 x | Propeller POWER-PROP 16x10 |
1 x | Propeller POWER-PROP 15x8 |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Propeller POWER-PROP 10x6 |
1 x | Propeller electric carbon 7x7 |
1 x | Dumper propeller 6/8 mm |
1 x | Propeller POWER-PROP 12x9 |
2 x | Propeller POWER-PROP 13x9 Izda |
1 x | Propeller POWER-PROP 14x12 |
1 x | Porpeller HUNTER 480 |
2 x | Propeller POWER-PROP 15x10 |
1 x | Propeller POWER-PROP 13x9 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Xplorer2 anemometro |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Tape GFK 38 mm |
2 x | SE Ring 330 mm (4 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
3 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 360 mm (2 pcs) |
3 x | |
2 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | USB Adaptor OPTronics |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Horn 6/20 with M3 Bearing |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Cable with accesories |
1 x | Horns indoor |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Small adjustable control horn with bearing |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Glass fabric 25 g (2 m²) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Horn DUBRO 1/2A |
2 x | Rudder forward 80x28 "type Kato" |
1 x | Horn for flap control (1 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | DPSI RV Mini 6 Magic |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Horn 5/15 with M2 Bearing |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Horn mando long (2 pcs) |
1 x | Indoor hinge with servo arm integraded |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Cable control set |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
2 x | 5 mm M2 variable inclined horn |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Release film 100 cm x 50 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Horn 5/10 with M2 Bearing |
1 x | Emcotec SPS Magnetic Switch Actuator |
1 x | RH long aluminium horn (2pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Extra long horn 60x30 |
1 x | 6 mm M3 variable inclined horn |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Ferrita 14x8x5.5 mm |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Dremel PERMAGRIT thin lime |
1 x | Dean-T Plug Mold |
1 x | 100g Flux Paste for Silver Solder |
1 x | Steel brush wheel with 2.35mm |
1 x | Rubber Insert hard, 1 Pcs. |
2 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Propeller APC 27x13 Electric |
1 x | Propeller APC 9x4.5 Electric |
1 x | Propeller APC 9x7.5 SF |
1 x | Propeller APC 5.1x4.5 Electric |
1 x | Propeller APC 8x3,8 SF Electric Pusher |
1 x | Propeller APC 8x8 Electric |
1 x | Propeller APC 7x4 Electric |
1 x | Propeller APC 7x5 SF |
1 x | Propeller APC 4.7x4.2 |
1 x | Propeller APC 9x4.7 SF |
2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Dremel 3000 130W |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Sandpaper file 13 mm |
1 x | |
1 x | Propeller APC 4.5x4.1 |
1 x | Propeller electric carbon 10.5x8 |
1 x | Propeller POWER-PROP 12x8 |
1 x | 12x6 tree blades propeller |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller POWER-PROP 11x9 |
1 x | Propeller POWER-PROP 9x5 |
1 x | Propeller electric carbon 10x8 |
1 x | Propeller APC 8x3.8 SF |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
2 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Wing Joiner BULL MØ1 2.600mm |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Wing Joiner ULTIMATUM 2.0 m |
2 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
2 x | Conector MR-60 (pareja) |
2 x | SERVO HOLDER |
2 x | BOEING 727, Electric brake 28mm + controller |
1 x | BULLIT Wing 840 mm |
1 x | BOOMERANG II 40/46 ARF 1.55mm |
2 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
2 x | BOEING 727, Jet pipe for Boeing 727 |
1 x | BOEING 727 kit |
1 x | PARAGON Trainer 46-55 1580 mm |
2 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Tank BULL MØ1 3L+14L Smoke (CMJets) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Spinner NUT 1/4x28 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Z Bender - S Type Tool |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | 57 mm micro-mini servo cover |
1 x | Avia (Top Model) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Starter EM Gear Power 80 |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Micro control horn T2 Ø 1 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Esc MasterBasic 70SB |
1 x | Esc X-40-SB-Pro |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | Propeller APC 10x7 SF |
1 x | Propeller APC 12x6 SF |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Propeller APC 13x6.5 Electric |
1 x | 76 mm light wheels (2 pcs) |
2 x | Propeller 3x3 |
1 x | Cooler motor type 150 |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 90x60 mm standart servo cover |
1 x | Bidule 55 V3 2460 mm |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Carbon plate 350x150x0.5 mm |
1 x | DPS Switch JR/JR |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Esc MasterSPIN 80 Pro |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Tachometer Hyperion Multi-pala |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 11x8 Electric |
1 x | Propeller APC 10x4.7 SF |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 12x10 Electric |
1 x | Propeller APC 13x10 Electric |
1 x | Propeller APC 11x4.7 SF |
1 x | Propeller APC 10x10 Electric |
1 x | Cooler motor type 280 |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Propeller 3x2 |
1 x | Threaded coupler M2 (10 uds) |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | PT 20x13 EL Propeller |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
1 x | TRAINER RC Pilot V2 90" w/r ARF |
1 x | BOEING 727, Retract set for Boeing 727 |
|
36,034.31EUR |