1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Allen wheel collar M3x5 |
4 x | 140 mm rods set for direction control |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 90 mm rods + T patellas set for direction control |
3 x | 100 mm rods set for direction control |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | Allen wheel collar M4x6 |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | 45 mm rods set for direction control |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Cockpit aluminium closing |
2 x | 38x4,5 mm wires output (2 pcs) |
3 x | 80 mm rods set for direction control |
1 x | Canopy Latch |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Wing OXY 0,5 pulgadas2 |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Conector MR-60 (pareja) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Parachute BACKUP X100 |
1 x | Set cintas unión paracaídas 145 cm |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
4 x | Trike XL motor set (motor+esc+prop) |
2 x | ABS tube 12.0x10.0x1000 mm |
3 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Parachute PV6 for F3J |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Paramotor BackPack XXS 2 |
4 x | ABS tube 9.0x7.0x1000 mm |
2 x | Paramotor Trike XL |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Extension MPX-MPX 20 cm |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | ABS tube 7.0x6.0x1000 mm |
2 x | ABS tube 3.0x1.0x1000 mm |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Turbina KINGTECH K320 G5 |
3 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Para-RC Mix |
1 x | Adaptadores carga 6s JST-XH |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | LUCAS pilot ARTF |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | ABS tube 5.0x4.0x1000 mm |
3 x | Ballast 700gr OPALE |
3 x | ABS tube 8.0x6.0x1000 mm |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Shirt Hispano Aviación |
1 x | Cap Hispano Aviación |
1 x | |
1 x | Ball Link Plier |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Cut tube |
1 x | Hot Glue Stick BLACK |
1 x | Hot Glue Stick GREEN |
1 x | Hot Glue Stick RED |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Copier 5x20 cm pcs |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
2 x | 2,0x50 mm allen screwdriver |
1 x | 3,0x60 mm allen screwdriver |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | |
3 x | Screwdriver for Hexagon 1,27mm |
1 x | 2,5x60 mm allen screwdriver |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Oracover Verde 2 m |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | SERVO DES 658 BB MG |
1 x | Anchor 25 mm (2 uds) |
1 x | 11 mm wing servo holder |
1 x | Futaba 38 mm servo arm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Antenna 50 mm (2 uds) |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Piñones SAVOX SH-0350 |
1 x | Servo MKS HBL550 |
2 x | Rescue 1,8m2 / BackPack |
1 x | Servo MKS HBL599 SL |
1 x | Mobile Terminal |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
2 x | MAX pilot ARTF |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Race Outboard MERCURY type A |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Aqua RACE 70 (without motor) |
1 x | Motor RACE 20 Navy 12v |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Wing OXY 5,0 m2 |
1 x | Parachute P4 |
1 x | Aramid 50 daN 50 m |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Opale Rucksack |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
2 x | Windsock Ozone L - 700 mm |
1 x | Vacuum pump P1-N |
2 x | Dust collector for mould cleaning |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Gates hinge |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | 25 mm reinforced hinge |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
2 x | Profile ABS Square 3 x 1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Profile ABS half cane 5.0x1000 mm |
2 x | ABS angle 10,0x10,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Dremel 3000 130W |
2 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Digital precision scale up to 2000 g |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Copier 2x20 cm pcs |
2 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Sealing Iron Sleeve PROF |
2 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Precision wrench L100 mm |
2 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Kwik link unmount tool |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Concave-Convex sandpaper file 13 mm |
2 x | Alu servo arm double RHINO |
2 x | LED wire (orange - 2pcs) |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | LED blink wire flashing (white - 2pcs) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
2 x | BULL MØ1 2.600mm ORANGE |
3 x | 300 Newtons FEMA absorber |
1 x | BULL MØ1 2.600mm "McLAREN-GULF" |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
3 x | BULL MØ1 2.600mm (mono color) |
1 x | BULL MØ1 2.600mm BLUE |
4 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Motor Mega AC 22/45/02 E |
1 x | Motor Mega AC 16/25/02 |
2 x | Servo RHINO pro SHV digi 4 |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | LED blink wire flashing (green - 2pcs) |
1 x | LED wire (white - 2pcs) |
1 x | ESC PULSAR A-40 |
2 x | LED blink wire flashing (blue - 2pcs) |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | SKY MASTER 3.000 mm ARF |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
2 x | LED wire (rojo - 2pcs) |
1 x | ASG 32 560 mm |
2 x | LED wire (blue - 2pcs) |
1 x | LED lighting system High Power |
3 x | BULL MØ1 2.600mm YELLOW |
2 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
2 x | 150 Newtons FEMA absorber |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
2 x | Servo BLUE Bird BLS-H71B v2 |
2 x | Servo BLS-M55B 61.2kg |
2 x | 400 Newtons FEMA absorber |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | BULL MØ1 2.600mm GREEN |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
2 x | Servo BMS-4112 |
3 x | 100 Newtons FEMA absorber |
2 x | 200 Newtons FEMA absorber |
2 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Fiberglass tube 6/4x1000mm |
1 x | BULL MØ1 2.600mm "RED BULL" |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
3 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
3 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Motor Mega AC 16/07/08 |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Motor Mega AC 16/35/01 |
1 x | KIRA 480-43 5,2:1 |
1 x | KIRA 500-26 6,7:1 |
1 x | KIRA 480-26 5,2:1 |
1 x | PYRO 700-45 Long Axi |
1 x | KIRA 480-31 5,2:1 |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | 45 mm gas motor standoff |
1 x | Servo DITEX TD2612S |
1 x | KIRA 480-43 |
1 x | KIRA 600-24 6,7:1 |
1 x | PBS TJ 40-G1 Turbine |
1 x | KIRA 600-17 |
1 x | KIRA 400-27 |
1 x | KIRA 600-22 6,7:1 |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | KIRA 600-38 6,7:1 |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
1 x | Servo SAVOX SB-2290 SG |
1 x | Servo SAVOX SA-128S SG |
1 x | Rubber profile 10-2 mm 2M |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Small pinned hinge (6 uds) |
1 x | Robart Door Hinge (Pk2) |
1 x | Small pinned hinge (12 uds) |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Round flex hinge (12 uds) |
1 x | Ø 65-75 mm canister holder |
1 x | 40 mm gas motor standoff |
1 x | 15 mm gas motor standoff |
1 x | Carbon blade 3D 230 mm |
1 x | Blade holder metal LAMA |
1 x | Motor Mount for Multiplex FunJet |
1 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | ED Position Lights wireless (Set of 3) |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | ULTIMATUM 2.0 PRO "McLAren" |
1 x | Bags BULL Mo1 2.6m "Luxe" |
2 x | BULL MØ1 2.600mm RED |
1 x | LightBox SR |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Servo SAVOX SV-1273 TG |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Servo SAVOX SV-1260 MG |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servo SAVOX SV-1261 MG |
1 x | Servoarm Aluminium SH-82 |
1 x | Servo SAVOX SV-1270 TG |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Servo SAVOX SA-1256 TG |
1 x | Propeller balancer |
1 x | Aluminium ignition bad (blue) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
2 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | BULL MØ1 2.600mm "ALPINE" |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | 25 mm Sandpaper file |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Servo Mount S (red) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Z Bender - S Type Tool |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | 120x60 mm SLH KOVO wheel |
2 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | Absorver mount set for 5-10 Kg models |
1 x | BULL MØ1 2.600mm "AeroPANDA" |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | EC-Cutter |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Welder 100W/200V |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Secraft Fuel system v2, red color |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Tachometer HANGAR 9 digital |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Carbon plate 350x150x3.0 mm |
1 x | MR30 connector male |
1 x | 300x4 mm M4 shaft ship |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Nylon Screw M4x20 |
1 x | Light System |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
|
122,174.84EUR |