1 x | Motor A2212/13T |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Size "M" motor holder for class 600 |
1 x | Motor holder AXI |
1 x | Size "M" motor holder for class 400 |
1 x | Micro flex hinge (12 uds) |
1 x | Bungee HLG Premium |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Softshell Hispano Aviación |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 1/4 Pilot "Heidi" |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 1/12 Pilot "Cougar" |
1 x | Glases Flitemaster |
1 x | 4 mm M3 red control terminal (4 pcs) |
3 x | Motor Mega AC 22/45/03 E |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Horn DUBRO 1/2A |
2 x | Rubber profile 10-2 mm 2M |
1 x | Rubber profile 6-2 mm 2M |
2 x | KIRA 480-38 5,2:1 |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
3 x | Motor Mega AC 16/15/04 COMBAT |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | KIRA 400-39 5,2:1 |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Horn 6/20 with M3 Bearing |
4 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | KIRA 600-24 6,7:1 |
3 x | Motor Mega AC 16/25/02 |
3 x | ABS angle 1.5x1.5x1000 mm |
1 x | AXI 2814/16 V2 Long |
4 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
2 x | Profile ABS half cane 8.0x1000 mm |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Blind nut M4 (4 pcs) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | 20x200 mm battery rings |
1 x | 800TVL CMOS camera for FPV |
1 x | 140 mm rods set for direction control |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Marker ties (20 pcs) |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | SE Ring 450 mm (2 pcs) |
1 x | XPower XC5030/14 LS |
1 x | Xplorer3 anemometro |
1 x | Short ball link M1.6 (6 uds) |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Long ball link M2 (6 uds) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Parachutist |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Initior Receiver FRX2 Wireless |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Smoke set "M" |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | AX-60 starters (5 pcs) |
1 x | Support XT60 conector (2 pcs) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Support conector MPX (6 pcs) |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Support FUEL DOT V3 |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Ball link M3 (6 uds) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Socket head long ball link M3 (2 uds) |
2 x | M2 5Diam short black ball link V2 (2 pcs) |
2 x | Support pump Xicoy X45 |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Smoke set "Glider" |
1 x | Fiberglass motor-holder for electric motors |
1 x | Size "M" motor holder for class 400 |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Angle of incidence meter |
1 x | Motor holder for AC 28/7 |
2 x | Indoor motor holder |
1 x | Field folding model stand |
2 x | Motor Mega AC 16/07/12 |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
3 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Motor Mega AC 16/15/03 |
2 x | Motor Mega AC 16/25/01E 3.17mm |
2 x | Nylon Screw M5x30 |
3 x | Motor Mega AC CAR 10 PRO |
3 x | Motor Mega AC 16/07/06 |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Quicklock washer 1 mm (10 pcs) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
3 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Styrene plate 320x120x0.5 mm |
2 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Screw M3x20 (10 pcs) |
1 x | Set Legs + Wheels with brake ASPIRE |
2 x | Connectors MPX male |
2 x | Manual Controller |
1 x | Boomerang SPRINT V2 Red/Yellow |
1 x | OPUS-V / Jet-CC-BF |
1 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
3 x | Motor Mega AC 16/15/04 |
3 x | Motor Mega AC 16/20/02 |
1 x | KIRA 600-20 6,7:1 |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | MAMBO 17 |
1 x | PYRO 750-50L Competition |
2 x | Motor Mega AC 16/15/08 |
1 x | KIRA 480-26 5,2:1 |
1 x | KIRA 480-34 5,2:1 |
3 x | Motor Mega AC 22/35 4S |
1 x | PYRO 750-50L |
3 x | Motor Mega AC 16/10/03 RACE |
1 x | PYRO 800-40 Long Axi |
1 x | KIRA 600-38 6,7:1 |
1 x | PYRO 700-56L |
2 x | Mega Motor RC 400 F5J 1950KV |
2 x | Motor Mega AC 22/45/02 E |
3 x | PYRO 650-103 Long Axi |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
3 x | Motor Mega AC 16/25/03 |
3 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | KIRA 480-38 |
2 x | PYRO 800-48 Long Axi |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
3 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | KIRA 480-43 |
2 x | Extinguisher CO2 - 2 Kg |
1 x | KIRA 400-34 |
3 x | KIRA 480-43 5,2:1 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
3 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | KIRA 600-20 |
3 x | Motor Mega AC 16/25/04 |
2 x | KIRA 500-36 6,7:1 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
2 x | Motor Mega AC 16/30/01 |
2 x | Motor Mega AC 16/15/02 |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
3 x | Motor Mega AC 22/20/03 |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | KIRA 500-30 6,7:1 |
3 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | KIRA 400-27 |
2 x | PYRO 700-45 Long Axi |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | KIRA 600-30 6,7:1 |
2 x | Motor Mega AC 16/07/08 |
1 x | PYRO 700-45 |
2 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | Motor Mega AC 16/15/07 |
2 x | Motor Mega AC 16/35/01 |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | Motor Mega AC 16/07/04 |
2 x | Nylon Screw M6x40 |
1 x | Screw M3x8(10 pcs) |
2 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
2 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Screw M3x30 (10 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
2 x | Propeller POWER-PROP 7x7 |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Nut for mounting M3 (4 pcs) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
2 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Screw M2x6 (10 pcs) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
2 x | Vacuum bag, 1200 mm x 50 m |
1 x | Screw M3x12 (10 pcs) |
2 x | Motor Mega AC 22/30/02 |
1 x | Screw M4x12 (10 pcs) |
2 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Nylon Screw M4x20 |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
2 x | Screws 2,2 x 6,5 mm (20 pcs) |
2 x | Pan Head Screw M2x6 PH |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Screw M3x16 (10 pcs) |
2 x | Ventus 1:4 set of instruments |
2 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
2 x | 10-15mm Servo Arm |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
2 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Nose wheel 62 mm |
1 x | Brake disc Electron Retracts |
2 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
2 x | GS-200 Electronic |
2 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | RB-45 Electronic |
2 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
2 x | ER-40eVo Set A [2x ER40 + RB-45] |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
2 x | Retract/Brake Cable |
1 x | 20-25mm Servo Arm |
3 x | Electromagnets brake |
2 x | 10-15mm Servo Arm HITEC |
2 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | Electron 22 mm Fitting barb |
2 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
2 x | Actuator Electric 25 mm HIGH TORQUE |
2 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | E_brakes electronics |
1 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
1 x | RANGER Jet Red/Yellow 1.854mm combo |
1 x | Bags wings/rudder ODYSSEY |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Tire ODYSSEY Ø 89mm |
1 x | PHASOR RACE 2035/2100 2D |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | PHASOR RACE 2035/4100 1D |
1 x | Tank Kevlar ASPIRE 6 L Kero |
1 x | Bags de Luxe ODYSSEY |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | Ball link M2,5 (10 pcs) |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | Ball link M1.6 (6 uds) |
1 x | "S" set for boats |
1 x | Trailing edge BALSA 35x8x1000 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Ball link M2 (10 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Ball link M3 (10 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Short ball link M2 (6 uds) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Support pumb/filter Xicoy X45 |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Parachute expulsion foam |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | White smoke canister 65 g |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Angle support XT60 conector |
1 x | Support Pitot JETI |
1 x | Motor MVVS 2.0/1120 |
1 x | Vasa model Catapult |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Battery charging cable XT60 |
1 x | ANGEL 48" pp orange/black/white |
1 x | Frontal support Speed 280 |
1 x | Cables suitable for the motor AC 28/7 |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Mobile Terminal |
1 x | Charger ISDT 608AC 200W |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | ABS I Strip 20x10x1000 mm |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | 270 mm 3/3 mm shaft ship |
2 x | ABS angle 2,0x2,0x1000 mm |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Fiberglass plate 620x540x0,3 mm |
2 x | Film release agent PVA 25 ml |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
3 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
3 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Socket Head Screw M2,5x12 |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | PYRO 900-52L |
2 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Lock nut M4 (10 pcs) |
1 x | Lock nut M5 (10 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | |
1 x | Fiberglass plate 620x540x1,0 mm |
2 x | PYRO 600-11 |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Hardener Aero EPH 161 (500 g) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
1 x | Sparkplug NGK CM6 |
1 x | Sparkplug 1/4-32 Glow |
1 x | Spark motor OS nº 3 |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | KIRA FAI 5F5/4s |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | PYRO 600-12 |
1 x | Socket Head Screw M2x8 |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
2 x | Nose leg 155 mm with wheels 70 mm |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
2 x | Fiberglass plate 350x150x4.0 mm |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | O-ring Saito FG-73 5cyl |
1 x | Junta humo metalica G35 DLE35 |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
2 x | 120x60 mm SLH KOVO wheel |
1 x | Distanzstück motor OS 120 AX |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Digital scale up to 40 kg |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Spring clamp for tube Ø50 mm |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Electric Landing Gear PC-21 Skymaster (Elektron Retracts) |
1 x | ER-40eVo Set B [Complet Set + GS200] |
1 x | Nose leg 155 mm with wheels 70 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Retract Landing gear ER40 Combo Custom complete |
1 x | Retract Landing gear ER40 Combo Xcalibur complete |
1 x | Actuator Electric 25 mm |
1 x | Bujia OS G5 gasolina |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Sparkplug DLE CM6 |
1 x | Spark motor OS nº 8 |
1 x | Sparkplug 1/4-32 |
1 x | Spark motor OS Type F |
1 x | Sparkplug Saito 400 |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Motor Mega AC 16/07/03 |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Motor Mega AC 16/25/06 |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Motor Mega AC 22/30/03 |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Axle for AXI 2217/xx motors |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | KIRA 480-31 5,2:1 |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 38 mm servo arm with ball link |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | KONDOR 15-92 |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | KIRA 500-26 6,7:1 |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | 6 mm M3 variable horn |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Screw M2x8 (10 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Motor OS 3820-1200 electric |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Lock nut M2 (10 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | USB Mini Camera endoscope |
|
74,556.89EUR |