1 x | Liferaft 47 mm |
2 x | ALMIRALSANKER anchor 40 mm (2 uds) |
2 x | Mounting base Ms 12 mm |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
2 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | Coupling bush 5 - 5 mm |
1 x | Ancla 16 mm (2 pcs) |
1 x | Stick coupler Ms 15 mm |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | Anchor 50 mm (2 uds) |
1 x | Mounting base Ms 8 mm |
2 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Anchor 80 mm (2 uds) |
2 x | Hinge 4x14 mm (20 pcs) |
1 x | Antenna 50 mm (2 uds) |
1 x | Foreman, scale 1:32 |
1 x | DYNAMOMETER S-1580 |
1 x | Ball Link Plier |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Conector JR Servo female (10 pcs) |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 30 cm DEANS female connector |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
4 x | Extension silicon 30 cm male (Futaba) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Flat Connector 4.0 mm x 1000 mm |
2 x | Soporte filtro FESTO (4 pcs) |
2 x | Extension silicon 100 cm (Futaba) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Conector BEC male (10 pcs) |
3 x | Extension 30 cm (Futaba) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Cabel "Y" 15 cm |
2 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | LOWER TOW HOOK |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | WingFix ULTRA Black Edition |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | 100 mm rods + T patellas set for direction control |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | BALSA triangular 8x8x1000 mm |
2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Pilot "Goose" (Slimline) |
2 x | BALSA triangular 6x6x1000 mm |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Oracover Brown 2 m |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Oracover Azul 2 m |
1 x | 1/6 Pilot "Buddy" |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | 1/12 Pilot "Cougar" |
1 x | ORACOVER Fluor red (2 m) |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | 19 mm 2:1 black termoretract tube |
1 x | 1/7 Pilot "Japanese" |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | 29,0 mm propeller (left propeller) |
1 x | 290 mm M5 Prop shaft |
1 x | Strut M 1:50 2D (30 pcs) |
1 x | Rudder 45 mm |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | Soporte con aro 17 mm (10 pcs) |
1 x | Coupling for 2,3 mm axis |
1 x | Davit 85 mm (2 pcs) |
1 x | Campana Ms 14 mm (5 pcs) |
1 x | Compass Ø 15 mm (20 pcs) |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | Eje barco 450x4 mm M4 |
1 x | COMPACT drive 26/45-20 DL=175 motor |
1 x | Compact on-board starting system (9512) |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Aluminium ignition bad (blue) |
1 x | Reed valve for DA 50-R |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Ball Bearings for motor A60-V2 |
1 x | Spring Clip Ø25 mm |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Spring clamp for tube Ø50 mm |
1 x | Aluminium ignition bad (red) |
1 x | Electromotor starter EME 35cc |
1 x | Compact on-board starting system (9713) |
1 x | Compact on-board starting system (9724) |
1 x | Propadapter for motor A50 |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | DLE 30 complete electronic ignition |
1 x | GLOW 2C + accesories |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
2 x | PIN Connector female (100 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
3 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Extension PVC 150 cm (Graupner) |
1 x | Combo lighting module with covering drop shape |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Support conector MPX (6 pcs) |
2 x | Extension silicon 25 cm (Graupner) |
1 x | Support ECU Xicoy X-45 |
1 x | Circlick securite |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
2 x | One touch canopy lock |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Allen wheel collar M4x6 |
4 x | Canopy Latch |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Heat sink for Optotronix LEDs |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Cockpit plastic closing |
3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | SUS wire 3m (nylon coated) |
1 x | Split pin 1.6x16 mm (10 uds) |
2 x | XT-30 connector (pair) |
2 x | Wing connector 8pin with pin strip, plug & socket |
2 x | MPX screwable clips (5 pcs) |
2 x | MPX Support (2 pcs) |
1 x | Protector Connector MPX (1 pair) |
2 x | Extension silicon 35 cm male (Futaba) |
2 x | Premium servo extension 50cm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Reflector 18 mm (2 pcs) |
3 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Premium servo extension 25cm |
1 x | Prolongador S-Bus JR/JR 10cm |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
3 x | Extension silicon 30 cm female (Futaba) |
2 x | Prolongador S-Bus JR/JR 20cm |
3 x | Extension silicon 75 cm (Futaba) |
3 x | Carbon fiber rod 3.0 mm x 1000 mm |
3 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Squared carbon wing joinner 5x5x220 mm |
2 x | Premium servo extension 100cm |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
3 x | Extension 7.5 cm |
2 x | Extension silicon 30 cm female (Graupner) |
2 x | Futaba Female 40 cm extension |
2 x | Extension silicon 100 cm (Graupner) |
3 x | Extension silicon 25 cm (Futaba) |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
2 x | Extension silicon 10 cm (Graupner) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Extension silicon 10 cm (Futaba) |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Extension 100 cm (Futaba) |
2 x | Extension silicon 75 cm (Graupner) |
1 x | Futaba Female 40 cm extension |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Support Flush MPX Conector (6 pcs) |
2 x | Extension lead 15 cm Multiplex |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Futaba male 40 cm extension |
2 x | Extension silicon 35 cm (Futaba) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Extension silicon 30 cm male (Graupner) |
2 x | Cabel "Y" 30 cm (Futaba) |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Support XT60 conector (2 pcs) |
2 x | 200 mm extensión servo HITEC/JR |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
3 x | Locking cable tie 2.5x100 (uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Control for forward wheel (MINI) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
3 x | Resistor 3W 5% 2R2 |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Steering arm 16 mm Ø 4 mm |
3 x | Allen wheel collar M3x5 |
3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Tip wing protector 40x14 (2 pcs) |
3 x | Aluminum Bayonet / strongal D25 mm / 1 m |
3 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Cabin latch Fox MDM1 4m (pair) |
3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
3 x | Allen wheel collar M4x4 |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
3 x | Cover cap drop-shaped paintable 43 mm |
3 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
3 x | Landing gear frontal support 25x32x16 |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Locking cable tie 4.6x203 (uds) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Split M1,2x10 (10 pcs) |
2 x | Snap long M2 (10 uds) |
1 x | Towing hook |
1 x | Snap for floding prop for 2 mm axi |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Piloto JET 1:3,5 |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | 1/6 Pilot "Cindy" |
2 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | SIG Coverall 1.2x0.9 m |
1 x | Piloto jet 130 mm |
1 x | 90x75 mm standart servo cover |
1 x | 18 mm wing servo holder |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Servo AN-8 HBA |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Soporte servo KST X08/H and Plus |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | ALU double servo arm 3 mm shaft |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | 11 mm wing servo holder |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Ply-Span 450x600/13g Black |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | 13 mm wing servo holder |
1 x | 1/6 Pilot "Garry" |
1 x | Pilot "Anthony" (Slimline) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 1/12 Pilot "Tom" |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Solarfilm Lite blue transp. 5m |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Servo DITEX EL0510M |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Coupling for 3 mm axis |
2 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | VIPER JET G2 Esq. 2 White/Red |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Ancla 35 x 22 mm (2 pcs) |
1 x | Wood anchor 30 mm (2 uds) |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Anchor 25 mm (2 uds) |
1 x | Propeller 3x3 |
1 x | Railing 5x100 mm |
1 x | Bandera Frankr 4x6 |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Selfstarr EME35 |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Shirt Hispano Aviación |
1 x | DLA 116 crankshaft |
3 x | LightBox SR |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Soldering PCBs 8pin, 5 pieces |
2 x | XT-60 connector (female) |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | XH LiPo extension lead |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | GPS Altis |
1 x | DPSI magnetic switch actuator (housing) |
1 x | DPSI Ampere & Voltage bundle |
1 x | DPSI Micro MPS |
2 x | Combo lighting module with covering drop shape |
1 x | Fuel Dot (RED) |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Resistor 3W 5% OR82 |
1 x | 100 mm rods set for direction control |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Cockpit metalic closing |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Bag connector 2 mm |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Mounting frame MPX male connector |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | MPX screwable clips (4 pcs) |
1 x | Servo Mount M (blue) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | MPX housing with flange (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | XT-60 connector (male) |
1 x | Red 4 mm connector holder |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | XT-90 connector (pair) |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Servo Connector Brackets (10 pcs) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | MPX Support |
1 x | Servo Mount S (red) |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Mounting frame MPX female connector |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | GameCommander USB Universal |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Filter Capacitor JR |
1 x | Fuel Dot (Silver) |
1 x | Fueling valve "Air" |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | DPSI RV Mini 6 (2008) |
1 x | EWC3 100 cm wing connector |
1 x | Emcotec SPS Magnetic Switch Actuator |
2 x | Resistor 3W 5% OR47 |
1 x | DPSI OCP Overload protection |
1 x | DPSI V-Match |
1 x | DPSI RV Mini 6 Magic |
1 x | Fuel Dot (Black) |
1 x | DPSI LR-S (with push buttons) |
1 x | DPSI Micro - RCS RV |
1 x | EWC6 40 cm wing connector |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | 80 mm rods set for direction control |
1 x | Pushrod octagone 3/2 |
1 x | Pushrod octagone 4/3 |
1 x | Cockpit latch closing I=10 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing 5.4g |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Clip fixing for wing (2 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | 28x5 mm wires output (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Covered closure or fairings |
|
15,226.57EUR |