2 x | Locking cable tie 2.5x100 (uds) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Locking cable tie 3.2x142 (uds) |
3 x | Steering arm 12 mm Ø 4 mm |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
3 x | Steering arm 16 mm Ø 4 mm |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
3 x | Screw-lock connector M2 (2 uds) |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | One touch canopy lock |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
3 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | 800TVL CMOS camera for FPV |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Cap closure 33/23.5mm (2 uds) |
2 x | Electric spoiler 250 mm (2 pcs) |
3 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | USB Mini Camera endoscope |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
3 x | SUS wire 3m (nylon coated) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Cable control set |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 5/10 with M2 Bearing |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
3 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | "M" set |
2 x | Blue smoke canister 100 g |
1 x | Smoke set "Glider" |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
2 x | Parachutist |
2 x | Remote electric ignition system |
1 x | Smoke set "M" |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
2 x | Parachute expulsion foam |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | White smoke canister 65 g |
1 x | White smoke bombs AX-60 (5 pcs) |
2 x | Blue smoke canister 140 g |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Green smoke canister 140 g |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Initior Transmitter FTX2 Wireless |
2 x | Yellow smoke canister 100 g |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | ABS tube 4.0x3.0x1000 mm |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Ball link M3 (6 uds) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Oracover Brown 2 m |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
3 x | Pushrod greyline 3/2 with coupler M2 |
3 x | Landing gear frontal support 29x26x13,5 |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
2 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | DC Small for MultiLog & UltraLight |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | Canopy Latch |
3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Snap for floding prop for 2 mm axi |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Snap short M2 (10 uds) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | X-RAY Micro QR |
1 x | Glider PIROL |
1 x | LS-8 GFK 6m Glider |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Horn mando small (2 pcs) |
2 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | 6 mm aluminium horn with patella |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Buy Perforated film 100 cm / 50 m |
3 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Horn 5/20 with M2 Bearing |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | 5 mm M2 variable inclined horn |
1 x | Horns indoor |
1 x | Cable video GoPro |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Cockpit plastic closing |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Horn 6/35 with M3 Bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Adjustable brass horn threaded M3 |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Horn 5/15 with M2 Bearing |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Indoor hinge with servo arm integraded |
2 x | Rudder forward 70x28 "type Kato" |
1 x | 6 mm M3 variable horn |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | White smoke canister 100 g |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | 3l Smoke oil |
1 x | Red smoke canister 65 g |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | PCARD Wireless System |
2 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Large flex hinge (12 uds) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | 300 Newtons FEMA absorber |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Initior Receiver FRX2 Wireless |
1 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
1 x | Mini DART 2 F3K carbon light 1m Green |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
2 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
5 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
2 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
2 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
2 x | Cable adapter iCharger |
2 x | 12V Car Adapter |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
3 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
2 x | Servo HITEC D625 MW |
2 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Pin hinge 39x20 mm (10 uds) |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
2 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
2 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Electric Fuel Pump 12v |
2 x | Servo HITEC HS-45 HB, servo box |
1 x | Fuel bottle 500 ccm |
2 x | Gear set HITEC HS-7950TH |
2 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
3 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
4 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
2 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
2 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
2 x | Servo HITEC HS-45 HB |
2 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
3 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Servo Robbe FS 525 BB MG HV |
2 x | Servo ROBBE FS-31 Pico Servo |
1 x | Jun-Si iCharger 4010 Duo |
1 x | Servo Robbe FS 128 BB MG HV Digital |
2 x | Charger 220/110v |
2 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | RX cabel |
1 x | Cockpit aluminium closing 4.7g |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | 100 mm rods set for direction control |
1 x | Cockpit aluminium closing |
2 x | 45 mm rods set for direction control |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
2 x | TX 250 mW especial GOPRO |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | Yellow smoke canister 140 g |
1 x | Red smoke canister 140 g |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Control horn long w/ball |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | ULTRA STICK 30 cc ARF |
1 x | EDGE 540 1.73m SEAGULL Model |
1 x | Motor A2212/13T |
1 x | Glases Nimbus |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Servo Bolt M3x6 (8 pcs) |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | Servo HITEC D941 TW |
1 x | Superlight deluxe wheel 40 mm (2 pcs) |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC D951 TW |
2 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Servo HITEC D954 TW |
2 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Servo HITEC D145 SW |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | T-shape holder metal LAMA |
2 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | UHU hart 35 g |
1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Propeller MEJLIK 32x12 EVO |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | 18x10 BIELA propeller |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Pipa 3D F-16 Scale 1/6 |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Allen wheel collar M4x6 |
2 x | Allen wheel collar M3x5 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Tail boom brace LOGO 480 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Covered closure or fairings |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Servo HITEC D85 MG |
1 x | Turbina KINGTECH K260 G5 |
1 x | Spinner 60 mm White (Kavan) |
2 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Gear set HITEC D645 MW |
1 x | Swashplate metal LAMA |
1 x | Servo HITEC D645 MW |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Valvula One way |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | 24x12 prop Super Silence |
1 x | Cyano INSTA - CURE™ (12g) |
1 x | Propeller FALCON 27x10 3-BL carbono-gas |
1 x | Propeller APC 15x6 Glow/Gas |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Propeller APC 15x8 Glow/Gas |
1 x | 23x10 BIELA propeller |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | 18x6 BIELA propeller |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
1 x | BD-5 Pro ARF |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Superlight deluxe wheel 68 mm (2 pcs) |
1 x | Servo HITEC HS-125 MG |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
2 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Gear set HITEC HS-225 |
1 x | UBEC 6A KAVAN |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Surface Indicator Gauge Small |
1 x | Spinner 60 mm Black (Kavan) |
1 x | Servo HITEC D131 MW nano |
1 x | Gear set HITEC HS-56 HB |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Gear set HITEC HS-55 |
1 x | Gear set HITEC HS-81 |
1 x | Spinner 50 mm White (Kavan) |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Screws set for Hitec MG arms servo |
1 x | USB programador GO servos |
1 x | Superlight deluxe wheel 45 mm (2 pcs) |
1 x | Superlight deluxe wheel 75 mm (2 pcs) |
1 x | Spinner 82mm Black ventilado |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | Servo HITEC D950 TW |
1 x | UHU Por 50ml/40g |
1 x | Loctite HYSOL 9462 |
1 x | Hysol Mixing Caps SET with 10 |
1 x | FOAM - CURE™ (24g) |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | FIALA Propeller 26x10 |
1 x | 29x12 prop Super Silence |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Propeller APC 12x10 Glow/Gas |
1 x | Epoxy 5 min. 200g |
1 x | White gelcoat 1 Kg |
1 x | 26x12 prop Super Silence |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Cyano INSTA - FLEX+™ (25g) |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Vess propeller 13x6 S |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | 30x14 prop Super Silence |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | FIALA Propeller 27x10 |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Mould Resin P 10 kg |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Extender tip (6 pcs) |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | 20x10 BIELA propeller (3-blades) |
1 x | 24x10 4Bl Scale |
1 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | 26x12 BIELA 3Bl Pusher propeller |
1 x | 24x8 BIELA propeller |
1 x | 18x8 BIELA propeller |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | 23x8 BIELA propeller |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
|
32,223.90EUR |