1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Marker ties (20 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
3 x | Lock washer 3.2 mm (20 pcs) |
1 x | Tape GFK 38 mm |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | SE Ring 240 mm (2 pcs) |
2 x | Aluminium wide washer M3 red (4 pcs) |
2 x | Quicklock washer 4 mm (10 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
3 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Quicklock washer 3 mm (10 pcs) |
2 x | Quicklock washer 2 mm (10 pcs) |
3 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | 20x200 mm battery rings |
2 x | M3 black washers (4 pcs) |
2 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
2 x | Cinta Goldfix 1m |
4 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Foil for sticking flaps and ailerons |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Flat washer 1.7 mm (20 pcs) |
1 x | Tape GFK 50 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
2 x | CC 01 |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | BEC 3A FOXY |
1 x | JETImodel SINGLE BEC |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Adapter lead MPX/XT60 |
1 x | 2 LiPo XH>EH adapter |
1 x | 30 cm BEC cable (female) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Oracover White 2 m |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Oratex Antik 2m |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Oratex White 2m |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Propeller POWER-PROP 13x9 Izda |
2 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | Oracover Yellow CADMIO 2 m |
1 x | ORACOVER Fluor red (2 m) |
1 x | Oracover CARBON Metalic 1 m |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Oracover Azul Cielo 2 m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
2 x | Oratex Silver 2m |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Oracover CHROME 2m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | MPX Sub-D Adaptor |
1 x | 1/6 Pilot "John" |
1 x | Wing OXY 5,0 m2 |
1 x | DYNAMOMETER S-1580 |
2 x | SERVO HOLDER |
1 x | Micro flex hinge (12 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Support Pitot JETI |
3 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
2 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
3 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
2 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
2 x | Lock nut M5 (20 pcs) |
2 x | SE Ring 300 mm (2 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Extractor piñones 2.3/3.2 mm |
2 x | Blades 330mm |
1 x | 3 LiPo XH>EH adapter |
1 x | Connector Sub-D 2+5 Female |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Circlick securite |
1 x | Male connector for 10 pines AWG |
1 x | DPSI magnetic switch actuator (housing) |
1 x | EWC6 40 cm wing connector |
1 x | Extension 6 lipos XH > EH |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | SPS 70V 100/200 A |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | USB HLS prog. interface |
2 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | Selfstart electronic switch |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Pulley brass 8/2 (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Pulley brass 12/2 (2 pcs) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | SE Ring 360 mm (2 pcs) |
2 x | Porta Kwik link M4 3 mm (2 pcs) |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Pulley brass 10/2 (2 pcs) |
1 x | TrainerCord (master-learner) |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Kwik link with arm M3xM2xL24 |
2 x | wire tensioner (blue) |
1 x | Micro clevis (10 uds) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Motor A2212/13T |
1 x | PPM Encoder Module |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Ply-Span 450x600/13g Blue |
1 x | Ply-Span 450x600/13g Orange |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | OS 40-FG 4T Motor |
1 x | GPS Sensor + Logger OPTronics |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Screw M3x16 (10 pcs) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Lock nut M4 (10 pcs) |
2 x | Screw M3x20 (10 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Bidule 55 2460 mm Cabina |
1 x | Avia (Top Model) |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Socket Head Screw M2,5x12 |
2 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Nylon Screw M4x20 |
2 x | Socket Head Screw M2x8 |
2 x | Socket Head Screw M2x10 |
1 x | 18 mm wing servo holder |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | BULLIT Wing 840 mm |
2 x | Astra (Top Model) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
2 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Astra wing Joinner (Top Model) |
1 x | Avia spare blue cockpit (Top Model) |
1 x | ARTIST 1.560 mm |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Bidule 111 3000 mm Canopy |
1 x | Albatros red/white (Top Model) |
2 x | Electric spoiler 300 mm (2 pcs) |
2 x | Electric spoiler 440 mm (2 pcs) |
1 x | 13 mm wing servo holder |
1 x | Bidule 55 V3 2460 mm |
1 x | Electric spoiler 185 mm (2 pcs) |
2 x | Bidule 170 ARF 3.48 m |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Challenger ARF (Top Model) |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | BULLIT Wing 1095 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Servo M2x9/16 screw (4 pcs) |
3 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Socket Screw M3x9 mm |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Screw M4x12 (10 pcs) |
2 x | Threaded insert M5 (10 pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | Screw M3x8(10 pcs) |
2 x | Threaded insert M3 (4 pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Head upper part |
1 x | PropCover 16-20" (2 pcs) |
1 x | Porpeller HUNTER 480 |
1 x | Propeller electric carbon 10.5x6 |
1 x | PSC 6 |
1 x | 15x7 tree blades propeller |
2 x | PSC 5 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Propeller electric carbon 6x5 |
1 x | Balls 4 mm |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Baering 3x8x4 |
1 x | Raer wall |
1 x | Nut M2 |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | PropCover 16-20" (1 pcs) |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | SIG Coverall 1.2x0.9 m |
1 x | EWC3 40 cm wing connector |
1 x | 8x6 tree blades propeller |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | SPARK Switch 7.4v |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Long Switch On/Off micro |
1 x | Extension 5 lipos JST/C - JST |
1 x | Opto Gas Engine Kill Switch |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Black large kwik link (10 pcs) |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Extension 5 lipos JST/C |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Charger LiPo Charger4 |
1 x | Charger 220/110v |
1 x | Towing hook |
1 x | Towing hook |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Jeti Black cap |
1 x | PIX Hawk with accesories |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | wire tensioner (black) |
1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Quick hose connector 4-4 mm |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Decorative caps, multicoloured, short |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Threaded insert M6 (10 pcs) |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ... |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Ventus 2cx 4.5 m de Luxe |
1 x | Switch Cap L (Red) |
1 x | Ciano KAVAN Medium 20g |
1 x | Tray for FUTABA 18 SZ |
1 x | Receiver bed (Blue) |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Switch Cap M (silver) |
1 x | Charger SKY RC D200 neo |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Set of buckles and strap, 1:4 scale. |
1 x | Prog Card V2 DUALSKY |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Switch Cap M (black) |
1 x | Switch Cap M (blue) |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Switch Cap M (red) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | XPower XC3522/5 LS |
1 x | Futaba Radio Case |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | XPower XC4226/12 LS |
1 x | Futaba Neckstrap |
1 x | SKY RC Temperature Sensor |
1 x | Charger ISDT 608AC 200W |
2 x | Blind nut M8 (10 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
2 x | Blind nut M2 (10 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
2 x | Blind nut M4 (4 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Blind nut M5 (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | 7 mm gas motor standoff |
1 x | NoNa BB wheel Ø200x60mm in pair |
1 x | Servo TOPMODEL DS9010 T |
1 x | 65 mm mini servo cover |
1 x | 90x60 mm standart servo cover |
1 x | Siesta T tail (Topmodel) |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Electric coversion set |
1 x | NoNa BB wheel Ø150x45mm in pair |
1 x | Navaho new design (Top Model) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | FOAM - CURE™ (24g) |
1 x | Horn for flap control (1 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Parachute P4 |
1 x | Angle of incidence meter |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Motor XPower F2915/12 XLight |
1 x | Parachute PV6 for F3J |
1 x | XPower XC5030/14 LS |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Cyano INSTA - CURE+™ (56g) |
|
17,682.73EUR |