3 x | Swing 1000 |
1 x | TMM 2512-3S heli |
2 x | Silent-blocks DLE 170M |
1 x | Cap Hispano Aviación |
1 x | Shirt Hispano Aviación |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Support conector MPX (6 pcs) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | 17 mm servo arm with ball link DES Graupner |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Futaba 30 mm servo arm with M3 ball link |
2 x | Hitec 20 mm servo arm |
2 x | ABS tube 18.0x16.0x1000 mm |
2 x | Futaba 38 mm servo arm |
2 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Rubber profile 10-2 mm 2M |
3 x | 50x45 mm micro-mini servo cover |
1 x | Horizontal mounting servo holder |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Rubber profile 6-2 mm 2M |
3 x | 90x60 mm standart servo cover |
2 x | 10-15mm Servo Arm |
1 x | Servo FUTABA SBL 471 SV |
1 x | ABS tube 3.0x2.0x330 mm |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | Servo DITEX EL0510M |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Cable coupler M2x66 (2 uds) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
3 x | 5 mm M2 variable horn |
2 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Cable coupler M3 (10 uds) |
1 x | Conector XT-30 (macho) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Servo Digital HITEC HS-5065 MG |
3 x | Extra long horn 60x30 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Oracover Brown 2 m |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Conector JR Servo male (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Blind nut M3 (4 pcs) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Vasa model Catapult |
3 x | TMM 1210-3S heli |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Motor Mega AC 16/07/08 |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Motor Mega AC 16/15/03 |
1 x | Motor Mega AC 16/15/02 |
3 x | Motor Mega AC 16/07/12 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | Motor Mega AC 16/25/06 |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Motor Mega AC 22/30/02 |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Motor Mega AC 16/07/04 |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
2 x | Motor Mega AC 16/35/01 |
1 x | Motor Mega AC 22/45/02 E |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
2 x | XPower XC4226/12 LS |
2 x | Motor XPOWER F2919/10 F5J Light |
1 x | 10 mm gas motor standoff |
1 x | A60-6XS V4 28-Pole |
1 x | Softshell Hispano Aviación |
1 x | A50 Backmountset complete |
1 x | Motor mount for 1200 mm models |
1 x | Cables suitable for the motor AC 28/7 |
3 x | Motor DLE 200cc Premium Muffler |
1 x | Esc master MEZON 120 Lite |
1 x | Cooler motor type 400 |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
2 x | Small Crow DLE-170M |
1 x | Big Crow DLE-170M |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Motor DLE 200cc Std |
1 x | Z Bender - S Type Tool |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | Logo 400 SE VBar |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Maleta transporte FUTABA 10PX |
1 x | Micro Crystal RX 35.160 Ch 76 |
2 x | Micro Crystal RX 35.890 Ch 189 |
1 x | Neck strap Double V2 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Ciano KAVAN Thick 20g |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
2 x | Ball Link Plier |
2 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | BETA 1400 ARF Red |
1 x | Adap/Exten for Futaba 12-14C |
1 x | SERVO DES 588 BB MG |
1 x | SERVO DES 806 Pignons |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | 45 mm aluminium spinner (Kavan) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Decorative caps, multicoloured, short |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | |
1 x | Aluminium servo arm (2 uds) |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
2 x | AC-10 pre-rotacion with motor |
1 x | Switch Cap L (Red) |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Ciano KAVAN Super Thin 20g |
1 x | |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Battery FUTABA 18MZ |
1 x | Xplorer3 anemometro |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Decorative caps, multicoloured |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | Birch plywood plate 600x300x4.0 mm |
2 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Micro control horn T2 Ø 1 |
1 x | 5 mm M2 variable inclined horn |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Telemetry adapter JestMunt |
1 x | Screw M3x20 (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Horn with ball 55x40 |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Nose wheel 62 mm |
1 x | Electron 22 mm Fitting barb |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Servo TT ACE SHV 1504 MG |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Servo TOPMODEL STANDARD S3217 |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
3 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
2 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
2 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Rudder forward 80x28 "type Kato" |
2 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Indoor hinge with servo arm integraded |
1 x | Long adjustable control horn 3x34 |
1 x | Micro control horn (2 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | Long horn 50x26 |
1 x | Small adjustable control horn with bearing |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Horn mando long (2 pcs) |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Long adjustable control horn with bearing |
1 x | Short extra-strong control horn with bearing 2,8x15 |
2 x | 6 mm M3 variable horn |
1 x | Control horn long w/ball |
2 x | Horn DUBRO 1/2A |
1 x | Horn mando small (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Socket Head Screw M2x5 |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Short adjustable control horn 3x24 |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Screw M3x16 (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Floating M3 washer pad (36 pcs) |
1 x | ECU BL180 Jets Munt |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | ER40eVo set B (20 Kg) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Digital weight, angle and balance meter BASIC |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | F4E Phantom Scale 1:7 |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | Tire ODYSSEY Ø 89mm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Pipa 3D F-16 Scale 1/6 |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Motor A30-14 L V4 |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Motor Mega AC 22/20/03 |
1 x | SIMtransmitter 6 Mode 2 |
2 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC 16/25/02 |
1 x | Interface Realflight Simulator |
2 x | Motor Mega AC 16/25/03 |
1 x | BOEING 727, Electric brake 28mm + controller |
2 x | Motor Mega AC 16/15/04 |
1 x | Interface Jack Adapter IKARUS |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Motor A50-12 L Glider |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | XPower XC5030/14 LS |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Film release agent PVA 25 ml |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Motor Mega AC 16/07/06 |
1 x | Motor Mega AC 16/25/01E 3.17mm |
1 x | Motor Mega AC 22/45/03 E |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | DLE 55 Muffler |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Futaba male 40 cm extension |
1 x | Extension 100 cm (Futaba) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | EDF Jet-Flex 80 - 8 Kg |
1 x | Rotorshape Elevator |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Motor class 400 + gearbox 1,86:1 |
1 x | Race 600 |
1 x | Race 400 7,2 V |
1 x | DLE 55 RA pipe plug |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Escape DLE-60 Izda |
1 x | DLE 55 Ignition unit |
1 x | Ball bearing 6003 DLE |
1 x | Carburetor DLE 30 |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | Gasket set DLE-55RA |
1 x | Cylynder DLE 20-RA |
1 x | DLE 85 Ignition unit |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Cable with accesories |
1 x | Premium servo extension 25cm |
1 x | VBar Control Touch, midnight black |
1 x | MR30 connector male |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 550 cc gasoline fuel tank complet |
1 x | Socket Screw M3x9 mm |
1 x | Spinner 90 mm CFK |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Spinner 159x200 mm GFK |
1 x | Tube bender |
1 x | Spinner 115 mm GFK |
1 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Straightened threaded rod M2-1m |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Spinner 125 mm GFK |
1 x | Tube Pitot to PIXHAWK |
1 x | Head core bushing |
1 x | Head spacer |
1 x | Wheel keeper washer |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Cierva C30 Elevator |
1 x | Head lower part |
1 x | LA500 pre-rotation gear |
1 x | Cierva C30 simulated motor |
1 x | LA500 nose |
1 x | Raer wall |
1 x | XPower XC3522/5 LS |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Gasket set DLE-30 |
1 x | DLE 111 pipe plug |
1 x | Valvula One way |
1 x | Extension 90 cm (Futaba) |
1 x | Superlight deluxe wheel 40 mm (2 pcs) |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Threaded coupler M2 (10 pcs) |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Antenna holder bracket double |
2 x | Spinner plastic white fixed propeller 30 mm |
2 x | Spinner NUT M6 |
2 x | Spinner NUT M5 |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | Wings carryng bags 30 class (SebART) |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
2 x | 57 mm micro-mini servo cover |
1 x | Astra wing Joinner (Top Model) |
2 x | 65 mm mini servo cover |
1 x | Gates hinge |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | 54 mm Futaba servo arm tandem with ball link |
2 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | 24x10 prop Super Silence |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Receptor MINIMA 6S HITEC |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Spinner plastic white fixed propeller 42 mm |
1 x | 42 mm white plastic spinner for fixed propeller |
1 x | Spinner NUT M6 |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | 50 mm black plastic spinner for fixed propeller |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | Spinner plastic red fixed propeller 30 mm |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Hopper UAT Sebar 600 ml |
1 x | Hopper UAT Sebar 400 ml |
2 x | 58 mm micro servo cover |
1 x | SunCover 50 Class (SebART) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Conector BEC female (10 pcs) |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | Avia (Top Model) |
1 x | Angle measurer |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Servo TOPMODEL DS9010 T |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | 24x12 prop Super Silence |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | 30x14 prop Super Silence |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Servo HITEC D954 TW |
1 x | Servo HITEC D645 MW |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Spinner plastic black fixed propeller 30 mm |
1 x | NoNa BB wheel Ø125x35mm in pair |
1 x | Spinner NUT 1/4x28 |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | 40 mm white plastic spinner for fixed propeller |
1 x | 36 mm red plastic spinner for fixed propeller |
1 x | ORACOVER Fluor red (2 m) |
1 x | Spinner NUT M8x1,25 |
1 x | CESSNA 50E White/Blue |
1 x | Avanti S Jet , Exhaust for JetCat P-140 (SebArt) |
1 x | Class 30, Red wheel pants (SebART) |
1 x | Avanti S 1.8m Jet RED Style |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
1 x | SunCover 2.2 Class (SebART) |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
1 x | CESSNA 50E White/Red |
1 x | Avanti S Jet , Carrying bags (SebArt) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | 7 mm gas motor standoff |
1 x | Astra (Top Model) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Bidule 111 3000 mm |
1 x | Avia spare blue cockpit (Top Model) |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
2 x | 18 mm wing servo holder |
1 x | Albatros red/white (Top Model) |
1 x | Bidule 55 2460 mm Cabina |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Bidule 111 3000 mm Canopy |
2 x | 90x75 mm standart servo cover |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Angle of incidence meter |
1 x | ARTIST 1.560 mm |
1 x | BULLIT Wing 1095 mm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Servo TOPMODEL DS1413 T |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Ball link M3 (10 pcs) |
1 x | 13 mm wing servo holder |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Ball link M2 (10 pcs) |
1 x | Adapter rotula M3 |
1 x | Servo TOPMODEL S7520 MG |
1 x | Futaba 30 mm servo rounded arm |
1 x | Futaba 20 mm servo arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Ball link M2,5 (10 pcs) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | 24x14 prop Super Silence |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | 1000 ccm gasoline fuel tank |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 27x10 prop Super Silence |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
2 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | AX-60 starters (5 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Gear set HITEC HS-7950TH |
1 x | Gear set HITEC D645 MW |
1 x | Servo HITEC HS-225 BB |
1 x | Gear set HITEC HS-85 |
1 x | Gear set HITEC HS-56 HB |
1 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC D951 TW |
1 x | Servo HITEC HS-225 MG |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Servo HITEC HS-125 MG |
1 x | HITEC DPC-11 programmer |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Parachutist |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | Servo HITEC HS-311 |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Remote electric ignition system |
1 x | Rocket D9-7 |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | 20 mm carbon horn |
1 x | FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M |
|
63,948.28EUR |