1 x | Vest clothes Hispano Aviación |
1 x | Motor DLE 200cc Premium Muffler |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
2 x | SAVOX SH 0255 MG servo |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Conector JR Servo male (10 pcs) |
1 x | 19 mm 2:1 black termoretract tube |
2 x | Blind nut M6 (4 pcs) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Allen wheel collar M3x5 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Blind nut M6 (4 pcs) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Allen wheel collar M4x6 |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Hitec 30 mm servo rounded arm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | SERVO DES 806 Pignons |
1 x | Servo Mount S (red) |
1 x | Futaba 25 mm servo arm with M3 ball link |
2 x | Medidor ángulos y/o incidencias |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
2 x | Horn 5/10 with M2 Bearing |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Metal gear set for HS81MG/5082MG |
2 x | Hitec 46 mm servo arm with ball link |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
2 x | Horn for flap control (1 pcs) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | HITEC DPC-11 programmer |
1 x | Professional Servo tester |
1 x | 1/12 Pilot "Fighter" |
1 x | 1/6 Pilot "Garry" |
2 x | Servo Robbe FS 525 BB MG HV |
2 x | 1/12 Pilot "Cougar" |
1 x | 1/6 Pilot "Buddy" |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Servo FUTABA BLS172 SV |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Piloto Jet "Red" 1/6 Scale |
2 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | |
1 x | SAITO FG-36 carburetor |
2 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | Deposito SECRAFT V2 1000 ml Gas |
1 x | EME 55 cc carburetor WALBRO |
1 x | "Taxi Tank" Fuel Tank |
1 x | Ball Bearings for motor A60-V2 |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
2 x | Savox Brushless Servo SC-1267 SG |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | Lock washer 3.2 mm (20 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Screw-lock connector M2 (2 uds) |
3 x | 460 mm EPP Floats |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn DUBRO 1/2A |
2 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | 6 mm M3 variable horn |
1 x | 5 mm M2 variable horn |
1 x | Angle measurer |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | 12 mm floating pad (49 pcs) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Blind nut M4 (4 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | Servo SAVOX SB-2290 SG |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
2 x | Blind nut M3 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
2 x | Quicklock washer 2 mm (10 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
2 x | Bungee HLG Premium |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Screw M2x8 (10 pcs) |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Vasa model Catapult |
1 x | Pan Head Screw M2x8 PH |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Tapping Screw M2.9x13 (10 pcs) |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
2 x | Screw M2.5x10 (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
2 x | Screw M2x6 (10 pcs) |
2 x | Pan Head Screw M2x6 PH |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | TMM 1210-3S heli |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Cockpit plastic closing |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Canopy Latch |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | Horn 6/35 with M3 Bearing |
2 x | 20 mm carbon horn |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | Brass control horn M2 long for wire (10pcs) |
2 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 5/20 with M2 Bearing |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
2 x | Horn 20x28,5 mm (2 pcs) |
2 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Horn 5/15 with M2 Bearing |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Cable control set |
1 x | Horn mando small (2 pcs) |
2 x | Horn 13,5x16 mm (2 pcs) |
2 x | Brass control horn M4 long for wire (4 pcs) |
2 x | Cable with accesories |
3 x | Horn 6/27 with M3 Bearing |
1 x | Horn mando long (2 pcs) |
1 x | Propeller balancer |
1 x | Field folding model stand SebArt |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | 1/12 Pilot "Tom" |
1 x | Hose stopper 4 mm |
1 x | Fast attachment for servos (25 pcs) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | 25 mm carbon servo arm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Racor 3/3 mm |
1 x | 1/4 Pilot "Mike" |
1 x | 1/4 Pilot "Heidi" |
1 x | Racor 4/6 mm |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Racor 2/3 mm |
1 x | Quick hose connector 3-3 mm |
1 x | Quick hose connector 3-3 mm |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Adapter 3,2 mm M6 |
1 x | 1/6 Pilot "John" |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Racor "Y" 3 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | FESTO connector M7 barb fitting XL Tygon |
2 x | Servo HITEC D950 TW |
1 x | Gear set HITEC HS-225 |
1 x | Alu servo arm double RHINO |
1 x | OSD Telemetry sensor |
1 x | SIG Coverall 1.2x1.8 m |
1 x | F4U CORSAIR 2360 mm |
1 x | SPITFIRE Mk-IX 81" (2058 mm) |
2 x | Shirt Hispano Aviación |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | 1000 ccm gasoline fuel tank |
1 x | Fuel Dot for Glow/Gas conversion DUBRO |
1 x | Fuel dot V3 (Blue) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Glases Nimbus |
2 x | Servo Digital HITEC HS-5065 MG |
2 x | Gear set HITEC HS-56 HB |
1 x | Motor A2212/13T |
1 x | P-51D "Gunfighter" 89" (2260 mm) |
1 x | Pilatus PC-21 2100 mm BLUE/WHITE (SebArt) |
1 x | Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt) |
1 x | F4U CORSAIR MARINES 2360 mm |
1 x | SPITFIRE Mk-IX 81", Electric retract Landing gear |
1 x | P-51D "Blondie" 89" (2260 mm) |
1 x | ZERO Figther A6M52 93", Electric retract Landing gear |
1 x | P-51D "Old Crow" 89" (2260 mm) |
1 x | Focke Wulf FW-190A-8 93" (2362 mm) |
1 x | P-51D Mustang 89" Gunfighter, Electric retract Landing gear E |
1 x | Propeller MEJLIK 29x10S |
1 x | Gear set HITEC HS-7950TH |
1 x | Propeller MEJLIK 21x8 CFK |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo SAVOX SA-128S SG |
1 x | Servo mounting frame SV-1260MG |
1 x | Servoarm Aluminium SH-82 |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Servo SAVOX SV-1261 MG |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | 18 mm wing servo holder |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Servo HITEC D941 TW |
1 x | Piñones SAVOX SH-0350 |
1 x | SAVOX SH 1290 MG servo digi |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Small aluminium horn blue (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Short adjustable control horn 3x24 |
1 x | Conector XT-30 (hembra) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Green smoke canister 65 g |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Gear set HITEC D645 MW |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Servo HITEC D85 MG |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | SAVOX SH 0254 servo |
1 x | Servo SAVOX SV-1260 MG |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servo SAVOX SH 0257 MG |
1 x | Servo SAVOX SW-1250 MG digi |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Servo SAVOX SA-1258 TG |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | Servo SAVOX SV-1270 TG |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Blind nut M2 (10 pcs) |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | Adjustable launching hook |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Albatros red/white (Top Model) |
2 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | 65 mm mini servo cover |
1 x | Servos security connector (2 pcs) |
2 x | Blind nut M8 (10 pcs) |
1 x | Bidule 111 3000 mm Canopy |
1 x | BULLIT Wing 1095 mm |
1 x | Threaded insert M4 (4 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | 13 mm wing servo holder |
1 x | Nylon Screw M4x20 |
1 x | Screw M4x20 (10 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Threaded insert M6 (10 pcs) |
1 x | ACTIVE ARF Electric 1.995 mm |
2 x | M3-M4 rubber washer (8 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Nylon Screw M5x30 |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Lock nut M5 (10 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | TMM 2512-3S heli |
1 x | 5 mm M2 variable inclined horn |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Control horn long w/ball |
1 x | Horn with ball 40x30 |
1 x | Futaba 46 mm servo arm with ball link |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Long adjustable control horn 3x34 |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Vertical mounting servo holder |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Micro control horn T2 Ø 1 |
1 x | Indoor hinge with servo arm integraded |
1 x | Gates hinge |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Micro control horn (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
|
25,649.76EUR |