2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Horn 5/10 with M2 Bearing |
2 x | 6 mm red aluminium threaded horn with patella |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
3 x | Cable control set |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Horn 20x28,5 mm (2 pcs) |
3 x | Ball link Aluminio M3 (2 pcs) |
2 x | Small aluminium horn gold (2pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
3 x | Cable with accesories |
1 x | Cable coupler M3 (10 uds) |
2 x | Black large kwik link (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
2 x | Cable coupler M3 (10 uds) |
2 x | Cable coupler M2 (10 uds) |
4 x | RH long aluminium horn (2pcs) |
3 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
4 x | Fully Threaded Steel Rod M2,5 (2 uds) |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
3 x | Brass control horn M4 short for wire (10pcs) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Couple M4 for wire (10 pcs) |
2 x | Cable coupler M2 (10 uds) |
3 x | Horn 13,5x16 mm (2 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
3 x | 20 mm carbon horn |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
3 x | Small aluminium horn blue (2pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Cable coupler M2,5 (2 pcs) |
3 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Horn with ball 40x30 |
2 x | Propeller MASTER 5,5x4 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | Propeller POWER-PROP 14x10 |
2 x | Propeller POWER-PROP 12x6 |
2 x | 8x6 tree blades propeller |
2 x | Propeller POWER-PROP 16x10 |
1 x | Propeller MASTER AIRSCREW 9x6 |
2 x | 6x4 tree blades propeller |
2 x | Propeller POWER-PROP 11x8 |
2 x | Propeller POWER-PROP 13x8 |
1 x | Propeller POWER-PROP 16x8 |
2 x | Propeller MASTER 5,5x4,5 |
2 x | 15x7 tree blades propeller |
1 x | Ferrita 14x8x5.5 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
3 x | Beech dowels 3.0 x 1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Medium pin type hinge (12 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | Propeller balancer |
1 x | Propeller MEJLIK 20x8 CFK |
1 x | Premium servo extension 100cm |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
2 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Propeller APC 8x4 Glow/Gas |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | FIALA Propeller 23x8 |
1 x | FIALA Propeller 18x10 |
1 x | Starter EM Gear Power 80 |
1 x | DLE 30 complete electronic ignition |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | FIALA 22X8 BLACK WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Compact on-board starting system (9724) |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
2 x | Hot Glue Stick BLACK |
1 x | Compact on-board starting system (9715) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | FIALA Propeller 18x8 |
2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
3 x | Small aluminium horn red (2pcs) |
1 x | Propeller POWER-PROP 15x8 |
1 x | Propeller POWER-PROP 14x8 |
3 x | 11x7 tree blades propeller |
1 x | MASTER 16x10 tree blades propeller |
1 x | Sparkplug DLE CM6 |
1 x | Sparkplug 1/4-32 |
1 x | Spark motor OS nº 3 |
1 x | Sparkplug NGK CM6 |
1 x | Propeller MASTER 6x4 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Propeller MASTER 6x3,5 |
2 x | Propeller MASTER 7x5 |
2 x | Propeller POWER-PROP 11x9 |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
2 x | Spark motor OS nº 8 |
1 x | Helice CLASSIC-Prop 20x10 |
1 x | Propeller MASTER AIRSCREW 9x6 |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | Horn 6/20 with M3 Bearing |
1 x | Kwik link AL M4 con Clip (2 pcs) |
3 x | 6 mm blue aluminium threaded horn with patella |
1 x | 40x22D BIELA propeller |
1 x | 28x12 BIELA 3Bl Pusher propeller |
1 x | Propeller BIELA 32x16 3Bl Semi-scale Focke Wulf - MOKI 250 |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | 29x23D BIELA propeller |
1 x | 29x10 BIELA propeller 2BL |
1 x | 32x12 BIELA 3Bl propeller |
1 x | 28x10 BIELA propeller |
1 x | 32x14 BIELA propeller (3-blades) |
1 x | 29x20D BIELA propeller |
1 x | Program 5v SIO RS 232 |
1 x | 32x18D BIELA propeller |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | CENTRAL PROPELLER BOLT FOR DLE85/111/120 |
3 x | CILINDER FOR DLE55, DLE111, DLE222 |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Male connector for 6 pines AWG |
2 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Extra long horn 60x30 |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Micro control horn (2 pcs) |
1 x | PCI-HV ignition conversion set with Zenoah rubber plug cap for Z |
2 x | Micro control horn T2 Ø 1 |
1 x | Long horn 50x26 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Horn DUBRO 1/2A |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | 5 mm M2 variable inclined horn |
1 x | 6 mm M3 variable horn |
1 x | Escape DLE-60 Dcha |
2 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Sensor Ignition DLE 20/20RA/30/35RA/55/55RA |
2 x | Gasket set DLE-120 |
1 x | Hub propeller DLE 111 V3/120 |
1 x | DLE 111 Carb gasket (V1) |
1 x | Muffler DLE-120 Right |
1 x | Piston ring for DLE-20 RA |
3 x | Canister combo DLE 170 cc |
2 x | Carburetor DLE 30 |
3 x | DLE 55 Ignition unit |
1 x | DLE 111 Old Crankshaft keyway |
2 x | DLE 85/111/120 Crankshaft keyway |
1 x | Cylynder DLE 20-RA |
1 x | DLE Ignition 111/120/170 |
1 x | Piston ring for DLE-55/111/222 |
2 x | Muffler DLE 20-RA |
1 x | Piston ring for DLE-20 |
2 x | Carburetor DLE 170M |
2 x | Piston ring for DLE-30 |
1 x | Canister combo DLE 120 cc |
2 x | Hub DLE 30 |
1 x | Carburetor DLE 170 |
2 x | |
2 x | CILINDER FOR DLE 55RA |
1 x | DLE Ignition 170M |
2 x | DLE 55 Muffler |
2 x | Carburetor DLE 20 |
1 x | Tape GFK 25 mm |
1 x | Cockpit aluminium closing 5.4g |
1 x | Cockpit plastic closing |
1 x | Female connector for 16 pines AWG |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Male connector for 12 pines AWG |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Female connector for 6 pines AWG |
1 x | |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | 40 mm air cylinder |
1 x | Fod Guard 94x32 mm |
1 x | Fod Guard 73x32 mm |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Cockpit aluminium closing |
1 x | Fod Guard 83x32 mm |
1 x | Tape GFK 50 mm |
1 x | Charger ISDT 608AC 200W |
1 x | ZENOAH G270RC |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | Horn mando long (2 pcs) |
1 x | ZENOAH ZG 62 SL |
1 x | ZENOAH ZG26 SCM Marine Engine |
2 x | ZENOAH/ZG 20cc |
3 x | Vess propeller 13x6 S |
2 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
2 x | Control horn long w/ball |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Horns indoor |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Brass control horn M2 large for wire (2pcs) |
2 x | Horn mando small (2 pcs) |
4 x | Reduction gear 2.8:1 for ZG 38 inline version |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
2 x | 6 mm M3 variable inclined horn |
2 x | ZENOAH ZG 80B |
2 x | 5 mm M2 variable horn |
1 x | SERVO DES 588 BB MG |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Spark motor OS Type F |
1 x | Sparkplug Saito 400 |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Bujia OS G5 gasolina |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | 30/11-26 Zoll, 3-Blade Scale |
1 x | Helice FOXY 22x10 2-Bl |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | Swing 1000 |
1 x | Propeller MENZ-S 21x8 |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Propeller MENZ-S 18x8 |
1 x | Propeller MENZ-S 17x6 |
1 x | Propeller MENZ-S 19x10 |
1 x | Propeller MENZ-S 15x6 3 blades |
1 x | Propeller MENZ-S 18x10 3-Blades |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sparkplug 1/4-32 Glow |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | TMM 1210-3S heli |
1 x | TMM 2512-3S heli |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Propeller MENZ-S 20x6 |
1 x | Propeller MENZ-S 15x12 |
1 x | Propeller MENZ-S 21x10 |
1 x | Propeller MENZ-S 18x6 |
1 x | Propeller MENZ-S 16x8 3-Blades |
1 x | Propeller MENZ-S 16x8 |
1 x | Propeller MENZ-S 21x10 3-Blades |
1 x | Propeller MENZ-S 16x6 |
1 x | Propeller MENZ-S 15x6 |
1 x | Propeller MENZ-S 20x12 3 blades |
1 x | Propeller MENZ-S 20x10 |
1 x | Propeller MENZ-S 17x10 |
1 x | Propeller MENZ-S 20x12 |
1 x | Propeller MENZ-S 15x10 |
1 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Propeller MENZ-S 16x12 |
1 x | Propeller MENZ-S 16x10 |
1 x | Propeller MENZ-S 20x9 |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Cilinder DLE 30 - DLE 60 |
1 x | Vacuum pump P1-N |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Robart Door Hinge (Pk2) |
1 x | Xplorer4 anemometro |
1 x | Dust collector for mould cleaning |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Aluminium servo arm (2 uds) |
2 x | 6 mm aluminium horn with patella |
1 x | ZENOAH ZG 26SLH Helicopter Engine |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Gasket set DLE-20 |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Sparkplug ROSSI R8 |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Horn 6/35 with M3 Bearing |
2 x | Horn 6/27 with M3 Bearing |
2 x | Horn 5/15 with M2 Bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Xplorer2 anemometro |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Carburator Moki S400 |
1 x | RX cabel |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | LiPo Storage Box Type "BIG" |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Carburator Moki S250 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Hot Glue Stick GREEN |
1 x | Hot Glue Stick RED |
1 x | Adjustable brass horn threaded M3 |
1 x | AC-10 pre-rotacion with motor |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Ball Link Plier |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Xplorer3 anemometro |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Z Bender - S Type Tool |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Horn with ball 55x40 |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Digital precision scale up to 2000 g |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
|
17,868.19EUR |