3 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | 20 mm carbon horn |
2 x | SlowFlyer control horn (3 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
3 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
3 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn with ball 55x40 |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn for flap control (1 pcs) |
4 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Small aluminium horn red (2pcs) |
4 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Cable with accesories |
1 x | Horn with ball 40x30 |
2 x | RH long aluminium horn (2pcs) |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Threaded coupler M3 (10 uds) |
2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
2 x | 2,3 mm Prop Drive Günther M4 |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | BALSA trip 8.0x8.0x1000 mm |
3 x | Couple M4 for wire (10 pcs) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
3 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Adapter 3,0 mm M6 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA trip 10x10x1000 mm |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Adapter 3,0 mm M8 |
1 x | Adapter 5,0 mm M8 |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | 2 mm Prop Adapter M5 |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Adapter 3,2 mm M8 |
1 x | Premium servo extension 50cm |
2 x | Extension PVC 150 cm (Graupner) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Extension 7.5 cm |
2 x | Cable S.BUS 3 salidas 100 mm |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Prolongador S-Bus JR/JR 20cm |
4 x | Cabel "Y" 15 cm |
1 x | Extension silicon 100 cm (Graupner) |
2 x | Prolongador S-Bus JR/JR 10cm |
1 x | Futaba Female 40 cm extension |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
3 x | 200 mm extensión servo HITEC/JR |
2 x | Extension silicon 35 cm male (Futaba) |
3 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Circlick securite |
4 x | Extension 90 cm (Futaba) |
1 x | Extension 30 cm (Futaba) |
1 x | Towing hook <3m |
1 x | LOWER TOW HOOK |
3 x | Carbon fiber rod 8.0 mmx1000 mm |
3 x | Carbon fiber flat 1000x3.0x1.0 mm |
3 x | Carbon fiber rod 16 mm x 1000 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | SE Ring 350 mm (2 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Spikes Band (5 m) |
1 x | SE Ring 400 mm (2 pcs) |
2 x | Tape GFK 25 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Ring 320 mm length (5 pcs) |
3 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 200 mm (2 pcs) |
2 x | SE Ring 330 mm (4 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 300 mm (2 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring 360 mm (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Indoor hinge with servo arm integraded |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Green smoke canister 140 g |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Cut tube |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1) |
1 x | Control horn long w/ball |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Cockpit latch closing I=10 mm |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Pulley brass 6/1,5 (2 pcs) |
2 x | Split M1,2x10 (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
2 x | Micro control horn T2 Ø 1 |
1 x | Micro flex hinge (12 uds) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Flat washer 3.2 mm (20 pcs) |
2 x | Tapping Screw M2.2x13 (10 pcs) |
2 x | Micro clevis (10 uds) |
1 x | Screw M2x6 (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Savox Brushless Servo SC-1251 MG |
2 x | Servo FUTABA BLS175 SV |
1 x | 50x45 mm micro-mini servo cover |
2 x | Extension silicon 10 cm (Graupner) |
1 x | Servoarm SH-81, two sides, aluminium |
2 x | SAVOX SH 1250 MG servo digi |
1 x | Premium servo extension 75cm |
2 x | Extension silicon 100 cm (Futaba) |
2 x | Servo FUTABA BLS 276SV |
1 x | Servo FUTABA BLS 272SV |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Futaba BLS152 - Upper Case |
1 x | Servo SAVOX SA-1256 TG |
2 x | Extension silicon 50 cm (Futaba) |
1 x | 58 mm micro servo cover |
1 x | Servo SAVOX SV-1260 MG |
2 x | Extension silicon 30 cm male (Futaba) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Servo HITEC D645 MW |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Servo HITEC HS-325 BB |
3 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | SERVO DES 568 MG |
1 x | Servo HITEC HS-5585MH |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | SERVO DES 658 BB MG |
1 x | Threaded coupler M2 (10 uds) |
1 x | Servo HITEC D131 MW nano |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Servo HITEC D954 TW |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Servo HITEC HS-311 |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Locking cable tie 2.5x100 (uds) |
3 x | Squared carbon wing joinner 5x5x220 mm |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
3 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | "S" set for planes |
1 x | Ventral support for AX-18/AX-60 |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Sealing Iron STANDARD |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | ESC ALPHA 60A HV |
2 x | 20x200 mm battery rings |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Tape GFK 50 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | SE Ring 480 mm (2 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Servo SAVOX SV-1270 TG |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Horn mando small (2 pcs) |
1 x | White large kwik link (10 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Pinion 13 - 2 mm |
1 x | Pinion 11 - 2 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Pinion 12 - 2 mm |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | COMPACT drive 26/45-20 DL=175 motor |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Pinion 09 - 2 mm |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Pinion 11 - 3,2 mm |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Servo TOPMODEL DS9010 T |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Servo SAVOX SB-2290 SG |
1 x | SERVO DES 588 BB MG |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Small adjustable control horn with bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Long horn 50x26 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | 65 mm mini servo cover |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Servo TOPMODEL DS1413 T |
1 x | 11 mm wing servo holder |
1 x | Servo FUTABA BLS173 SV |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Servo FUTABA S 9670 SV |
1 x | Servo HBS 690BB HV Digital |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Servo AN-8 HBA |
1 x | Soporte metal para servos |
1 x | SERVO DES 806 Pignons |
1 x | Battery LiPo GENS 5500 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | TMM 2512-3S heli |
1 x | Swing 1000 |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Tachometer HANGAR 9 digital |
1 x | Tool for entel |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Small control horn with bearing (2 pcs) |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Micro control horn (2 pcs) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Short adjustable control horn 3x24 |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
1 x | Lipo KAVAN 2200 mAh 11.1v 30/60C |
1 x | Parachute BACKUP X100 |
1 x | Programador FUTABA USB CIU-3 |
1 x | Roller cutter 28 mm |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Welder 100W/200V |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Tachometer Hyperion Multi-pala |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Heat Seal Iron |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Sealing Iron Profi LCD |
1 x | Steel brush wheel with 2.35mm |
1 x | Tool for entel |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line |
2 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | MR30 connector male |
1 x | Socket Head Screw M2x12 |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Landing gear strap medium (4 uds) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Motor holder for AC 28/7 |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Lock nut M5 (20 pcs) |
1 x | Long ball link M3 (6 uds) |
1 x | Landing gear strap small (4 uds) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Lock nut M4 (10 pcs) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Landing gear strap large (4 uds) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Lock nut M5 (10 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Lock nut M2 (20 pcs) |
1 x | Lock nut M2.5 (10 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
|
7,821.77EUR |