1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Lipo GENS 2200 mAh 2s 7.4v 20c Soaring |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace) |
1 x | Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace) |
1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
1 x | Battery LiPo GENS 2200 mAh 3S 11.1v 45C (Gens Ace) |
1 x | Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | WingFix ULTRA Black Edition |
1 x | Marker ties (20 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | Surface Indicator Gauge Small |
1 x | Angle measurer |
1 x | SE Ring 360 mm (2 pcs) |
3 x | Tape GFK 38 mm |
1 x | SE Ring 350 mm (2 pcs) |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Cinta Goldfix 1m |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Spikes Band (5 m) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Medidor ángulos y/o incidencias |
2 x | Angle of incidence meter |
1 x | Propeller balancer |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Foil for sticking flaps and ailerons |
3 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Paint gun for sprays |
2 x | Universal Colour Paste deep black 50 g |
1 x | Spray YELLOW Inca Lexan 150ml |
2 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
3 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | 500 ml sealer (DOPE) |
1 x | Universal Colour Paste deep black 250 g |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | CC 02 |
1 x | CC 03 |
1 x | 5 LiPo XH>EH adapter |
1 x | Adapter lead MPX/EC3 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Oracover Azul Cielo 2 m |
1 x | Oracover Green10 m |
1 x | Oratex Silver 2m |
1 x | Oracover light Grey 2m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Oracover Azul 2 m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Oracover Yellow CUB 10 m |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Oracover Black 10 m |
1 x | Oracover Verde 2 m |
1 x | Piloto jet 130 mm |
2 x | 1/12 Pilot "Cougar" |
1 x | 1/4 Pilot "Mike" |
3 x | Civilian pilot "Gramps" size 9cm (Slimline) |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Piloto JET 1:3,5 |
1 x | 1/6 Pilot "Tony" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
3 x | 1/4 Pilot "Heidi" |
3 x | 1/7 Pilot "Japanese" |
2 x | 1/6 Pilot "Buddy" |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
2 x | 1/12 Pilot "Fighter" |
2 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
3 x | 1/12 Pilot "Tom" |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | 1/10 Pilot "Jimmy" |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | SE Ring 240 mm (2 pcs) |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | SE Ring 400 mm (2 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | SE Ring 200 mm (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Nitroverdu 500 ml |
1 x | Partall paste 650 g |
1 x | Hobbylite Filler, Balsa colour |
2 x | Spray Graphit 33 |
2 x | Tape GFK 50 mm |
1 x | 20 g tin paste |
2 x | Sparkplug 1/4-32 |
1 x | |
2 x | SE Ring 300 mm (2 pcs) |
2 x | 1/10 Pilot "Jack" |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | 1/6 Pilot "John" |
3 x | 1/6 Pilot "Cindy" |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | 1/6 Pilot "Garry" |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Adjustable launching hook |
1 x | Fuel bottle 500 ccm |
2 x | Piloto Jet "Green" 1/6 Scale |
2 x | Pilot "Adolf" Legends Series (Slimline) |
3 x | Pilot JAN 1/4 Saiplanes |
2 x | Soporte servo KST X08/H and Plus |
2 x | Servo KST X08 Plus 9g HV servo |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
2 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Servo RHINO pro SHV digi 4 |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Adapter 3,0 mm M8 |
2 x | 6 mm Prop Adapter M8 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Allen wheel collar M3x5 |
2 x | Servo arms set HS-65HB/MG/5065MG |
2 x | Aluminium servo arm (2 uds) |
1 x | 10 mm dogdrive props |
2 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
3 x | BALSA triangular 15x15x1000 mm |
2 x | Aceite AEROSHELL 500 SE Turbina 0,9 kg |
1 x | Soporte servo KST X10 mini / DS135MG |
3 x | GameCommander USB Universal |
2 x | RF9 Flight Simulator with Spektrum Controller |
2 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
2 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | MIG 29 3D RTF, Servo |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | 3 mm Long Prop Adapter M5 |
1 x | 5 mm Prop Adapter M8 |
2 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | 25 mm carbon servo arm |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 4 mm Prop Adapter M6 |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
2 x | |
2 x | Metal gear set for HS81MG/5082MG |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Adapter 4,0 mm M8 |
2 x | Fast attachment for servos (25 pcs) |
2 x | 5 mm Prop Adapter M6 |
1 x | Allen wheel collar M4x6 |
1 x | Adapter 5,0 mm M8 |
3 x | |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
2 x | 12 mm dogdrive props |
1 x | Adapter 3,0 mm M6 |
1 x | 3 mm Short Prop Adapter M5 |
1 x | 2 mm Prop Adapter M5 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
3 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | 50 mm servo arm with bearing (2 pcs) |
2 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Z Bender - S Type Tool |
1 x | Vacuum pump 12 CFM |
1 x | Tool for entel |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | Motor A30-10 XL V4 |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Motor Mega AC 16/25/01E 3.17mm |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | AXI 2820/10 V2 Long |
1 x | AXI 2814/10 V2 |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Ring 320 mm length (5 pcs) |
1 x | XPower XC3522/5 LS |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | Motor A50-12 L Glider |
1 x | Spray EC Red 400ml |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor A40-10S V4 14-Pole |
1 x | Axle for motor A50-L |
1 x | Motor Mega AC 16/15/04 |
1 x | Spark plug key NGK MVVS |
1 x | Motor Mega AC 22/35 4S |
1 x | Motor Mega AC 16/15/08 |
1 x | AXI 2820/12 V2 |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Motor Mega AC 16/25/02 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | AXI 2217/20 V2 |
1 x | Motor Mega AC 22/20/03 |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Spark motor OS nº 3 |
1 x | Sparkplug 1/4-32 Glow |
1 x | Interruptor On/Off Corto micro |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Glow starter with charger 230v |
1 x | AIRSPEED SENSOR SBS01TAS |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | GP 15 JETA |
1 x | Backmountset complete A40 |
1 x | Motor A50-16 S V4 |
1 x | Wheel 38 mm V2 |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
2 x | Xoar Electric Beechwood Prop 16x7 |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Couple M4 for wire (10 pcs) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Pegamento Pu R 50g polyuretano |
1 x | Frontal support Speed 400/480 |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Motor holder for AC 28/7 |
1 x | Nut for mounting M2 (4 pcs) |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | FIALA Propeller 19x12 Electric |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | Interface Jack Adapter IKARUS |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Slave-cable USB Easy Sim |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Spinner black 30 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Excentric gearbox for 3,2mm axis (2,33:1) |
1 x | Allen wheel collar M3x3 |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Pan Head Screw M2x8 PH |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Interface Realflight Simulator |
1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Servos security connector (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner negro 40 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Aceite SHELL 560 Turbina 0.9Kg |
1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | UHU Por 50ml/40g |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy 30 min. 200g |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Epoxy 10 min 190g |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Spinner NUT M6 |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Spinner NUT M8x1,25 |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Micro control horn T2 Ø 1 |
1 x | Control horn long w/ball |
2 x | Micro control horn (2 pcs) |
1 x | Adapter 3,2 mm M6 |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Adapter 4,0 mm M6 |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,8:1) |
1 x | Excentric gearbox for 2,3mm axis (3,5:1) |
1 x | Adapter 3,2 mm M8 |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Nylon Screw M6x40 |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Nylon Screw M5x30 |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
|
18,484.64EUR |