1 x | MG cannon 1.8 cm (5 pcs) |
1 x | SCHARNHORST accessories |
1 x | Dumper propeller 6/8 mm |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | La Capitania di Venetia accesories |
1 x | 6 mm Prop Adapter M8 |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 6 mm Prop Adapter M8 |
1 x | Tirpiz Battleship 1:200 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Aero-Master (Aero-naut) |
1 x | 5 mm Prop Adapter M6 |
1 x | 10 mm Prop Adapter M12 |
1 x | 5 mm Prop Adapter M8 |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | ABS angle 10,0x10,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Connectors banna oro 6,0 mm (M/F) |
2 x | Gold antispark 5,5 mm plug |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | 30 cm DEANS female connector |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Conector BEC female (10 pcs) |
3 x | Connectors DEANS (T) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | XH male balance (4S) connector (2 pcs) |
3 x | Connectors banna oro 3,5 mm (M/F) |
2 x | 3 LiPo XH>EH adapter |
2 x | USB HLS prog. interface |
1 x | 5 LiPo XH>EH adapter |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | 4 LiPo XH>EH adapter |
1 x | CC 02 |
1 x | BEC 3A FOXY |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Dean "T" - Futaba Adapter |
3 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | JETImodel SINGLE BEC |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | MPX-Dean "T" Adapter |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | CC 01 |
2 x | Adapter lead MPX/EC3 |
2 x | CM-3 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Adapter lead MPX/XT60 |
1 x | CC 03 |
1 x | 30 cm BEC cable (male) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | 25 mm reinforced hinge |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | 15 mm reinforced hinge |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Gates hinge |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
3 x | Large flex hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | 20x1000 mm Ring Strap Back To Back |
2 x | Ring 320 mm length (5 pcs) |
2 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Marker ties (20 pcs) |
2 x | 20x200 mm battery rings |
3 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 330 mm (4 pcs) |
1 x | Remote electric ignition system |
1 x | Oracover Azul Cielo 2 m |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Anchor 25 mm (2 uds) |
1 x | 4 mm Prop Adapter M6 |
1 x | Low line 74 mm |
1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
2 x | Servo Digital HITEC HS-5065 MG |
1 x | SERVO DES 568 MG |
3 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Servo Tester |
2 x | Servo inverter |
1 x | PS-050 TONEGAWA Servo |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Servo MKS HV6130 |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Servo MKS HV747 |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Servo MKS HV1220 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Foil for sticking flaps and ailerons |
1 x | Extension 2/3 lipos JST/C |
1 x | SPARK Switch 12v |
1 x | Male Prolonger TP 4/5S |
1 x | Mounting frame MPX female connector |
1 x | PowerBox SparkSwitch RS |
2 x | SBEC Jeti |
2 x | PIN Connector female (100 pcs) |
1 x | MPX screwable clips (4 pcs) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | TrainerCord (master-learner) |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Conector Servo female 4 pines |
1 x | Three-position switched channel, short |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | SPS 70V 140/280 A |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | USB interface ALTIS |
1 x | MPX housing with flange (4 pcs) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Glases Nimbus "Black" |
1 x | Servo HITEC HS-65 MG |
1 x | Ciano KAVAN Thick 20g |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Servo HITEC HS-85 BB |
1 x | 30 cm MULTIPLEX female connector |
1 x | Conector JR Servo male (10 pcs) |
1 x | Connector Sub-D 2+5 Female |
1 x | Connector Sub-D 2+5 Male |
1 x | Conector JR Servo female (10 pcs) |
2 x | Connectors banna oro 3 mm (M/F) |
2 x | Connectors MPX male |
1 x | Conector JR Servo female (10 pcs) |
1 x | SPARK Switch 7.4v |
1 x | DPSI Ampere battery backer |
1 x | Connectors MPX male (PIN double) |
1 x | SPS Remote switch actuator |
1 x | SPS 70V 100/200 A |
1 x | 30 cm BEC cable (female) |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
2 x | Opto Gas Engine Kill Switch |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | 2 LiPo XH>EH adapter |
1 x | Switching module high voltage SXH |
1 x | Multi-adapter balancer JST - TP |
1 x | Short Switch On/Off micro |
2 x | PSC 6 |
1 x | PSC 5 |
2 x | Spikes Band (5 m) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Tape GFK 25 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Cinta Goldfix 1m |
1 x | Professional Servo tester |
1 x | Jet Pipe for ULTIMATUM 2m |
2 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
2 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Set stickers JEEMO "Andy" |
1 x | Jeemo Dolly |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
2 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
2 x | Servo Robbe FS 525 BB MG HV |
2 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
2 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
2 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
3 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
2 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Ply-Span 450x600/13g Black |
1 x | Ply-Span 450x600/13g White |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Spinner red 36-38 mm |
1 x | Porpeller HUNTER 400 |
1 x | Support GFK propeller ple. 2Bl |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Spinner black 40-45mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Ply-Span 450x600/13g Blue |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | Servo MKS HBL550 |
1 x | Servo MKS 6100 DS |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Oracover ROYAL RED 2m |
1 x | Glases Flitemaster |
1 x | MPX Sub-D Adaptor |
1 x | Connectors MPX black female |
1 x | Gear set HITEC HS-225 |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Screws set for Hitec MG arms servo |
1 x | Gear set HITEC HS-85 |
1 x | Crystal RX 35.020 Ch 62 |
1 x | Crystal RX 35.030 Ch 63 |
1 x | Micro Crystal RX 35.890 Ch 189 |
1 x | Ciano KAVAN Thin 20g |
1 x | Servo HITEC D85 MG |
1 x | Servo HITEC HS-7115 TH |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | Servo HITEC HS-7955 TG Coreless Digi |
1 x | BETA 1400 RTF Red |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Charger SKY RC e680 |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Tape GFK 50 mm |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Spare white 38-45 mm spinner |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Ply-Span 450x600/13g Orange |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Red spinner 40-45 mm |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Schul-Malpinsel Gr.5 |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Spinner black 36-38 mm |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Porpeller HUNTER 480 |
2 x | SE Ring 250 mm (2 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Protector Connector MPX (1 pair) |
1 x | Magnetic Connect locking system |
1 x | Protector Connector Dean-T (1 pair) |
1 x | XT-60 connector (male) |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Connectors MPX black male |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Blind nut M6 (4 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Micro Crystal RX 35.160 Ch 76 |
1 x | Micro Crystal RX 35.070 Ch 67 |
1 x | Micro Crystal RX 35.140 Ch 74 |
1 x | Crystal RX 35.010 Ch 61 |
1 x | Micro Crystal RX 35.100 Ch 70 |
1 x | Crystal RX 35.250 Ch 285 |
1 x | Micro Crystal RX 35.090 Ch 69 |
1 x | Micro Crystal RX 35.080 Ch 68 |
1 x | Screw M3x16 (10 pcs) |
1 x | Micro Crystal RX 35.170 Ch 77 |
1 x | Servo HITEC D145 SW |
1 x | Servo HITEC HS-5805 MG Digi |
1 x | Servo HITEC HS-5685MH |
1 x | Servo HITEC HS-75BB Retract |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Servo HITEC HS-5585MH |
1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Servo HS-5765MH High Voltage |
1 x | Servo HITEC HS-5625 MG Digi |
1 x | Servo HITEC HS-7245MH |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Servo HITEC HS-85 MG |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Servo HITEC HSB-9360TH |
1 x | Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo |
1 x | Gear set HITEC HS-7950TH |
1 x | Servo HITEC HS-785 HB |
1 x | Servo HITEC D950 TW |
1 x | BETA 1400 ARF Red |
2 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Circlick securite |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Cabling for Fox MDM1 wings |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Interruptor RX/Batterie |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | MR30 connector female |
1 x | GPS Logger Dymond |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | Gear for D 200 BX |
1 x | Gear for D 54 |
1 x | Servo inverter |
1 x | Gear for MICRO BB |
1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Servo Dymond D 37 Eco |
|
23,336.86EUR |