1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | USB Mini Camera endoscope |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Adapter lead MPX/EC3 |
3 x | USB HLS prog. interface |
1 x | 800TVL CMOS camera for FPV |
1 x | 30 cm BEC cable (female) |
5 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | JETImodel SINGLE BEC |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | CC 05 |
4 x | CC 02 |
1 x | TrainerCord (master-learner) |
1 x | TP/TopFuel - XH 2/3S Adapter |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
3 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
2 x | Strip ABS 2.0x8.0x1000 mm |
3 x | Locking cable tie 4.6x203 (uds) |
3 x | Strip 1,5x1,5x330 mm |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | Round Rod 5,0x1000 mm |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
3 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Covered closure or fairings |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Round Rod 1,25x1000 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Pilot "Dick" Legends Series (Slimline) |
2 x | Piloto Jet "Green" 1/6 Scale |
2 x | Pine wood slat 10x10x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Windsock Ozone L -1200 mm |
1 x | Ballast 700gr OPALE |
2 x | Paramotor BackPack XXS 2 |
1 x | MAX pilot ARTF |
1 x | Paramotor BackPack XXS (without accessories) |
2 x | Para-RC Trike "RC-Bullix" |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Parachute PV6 for F3J |
1 x | Wing OXY 5,0 m2 |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Parachute BACKUP X100 |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | 15 mm reinforced hinge |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Support FUEL DOT V3 |
3 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | 4 LiPo XH>EH adapter |
2 x | Gear for MICRO BB |
2 x | 5 LiPo XH>EH adapter |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
4 x | Propeller APC 16x5.5 MR Electric Pusher |
3 x | 2 LiPo XH>EH adapter |
1 x | Servo HITEC HS-5084 MG |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | SERVO DES 806 Pignons |
2 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Servo HITEC D85 MG |
1 x | SERVO DES 568 MG |
2 x | Control for forward wheel (MINI) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Lead with adhesive (2 pcs) |
3 x | Servo FUTABA BLS173 SV |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Cockpit plastic closing |
1 x | Split M1,2x10 (10 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Servo FUTABA BLS 276SV |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Servo DITEX TD2612S |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Cockpit metalic closing |
1 x | Servo FUTABA S 9670 SV |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Servo FUTABA BLS 272SV |
2 x | Propeller POWER-PROP 7x7 |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
2 x | Servo FUTABA S 3071 HV S-Bus |
2 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Extension 5 lipos JST - JST/C |
2 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Interruptor RX/Batterie |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
2 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon plate 350x150x2.5 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | AXI 2814/12 V2 |
1 x | Allen wheel collar M4x4 |
1 x | Release film 100 cm x 50 m |
2 x | CM-3 |
1 x | AXI 2820/12 V2 Long |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | AXI 2814/16 V2 |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | AXI 2820/14 V2 Long |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | AXI 2820/8 V2 Long |
1 x | 1/6 Pilot "Tony" |
2 x | Screwdriver for Hexagon 1,27mm |
2 x | Motor MVVS 5.6/690 GLIDER |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | PYRO 600-11 |
1 x | 1/6 Pilot "Garry" |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | MAMBO 17 |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | PYRO 600-12 |
1 x | KIRA 480-38 |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Turbo light spinner cap white 32mm |
1 x | 1/12 Pilot "Tom" |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | PYRO 700-45 |
1 x | 30 cm BEC cable (male) |
1 x | KONDOR 15-92 |
2 x | PYRO 650-53L EJE LARGO |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Shaft for A60-L (140mm) |
1 x | Piloto JET 1:3,5 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | KIRA 600-20 6,7:1 |
1 x | KIRA 400-39 5,2:1 |
1 x | PYRO 700-45 Long Axi |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | BEC 3A FOXY |
1 x | Motor MVVS 2.0/1120 |
1 x | A60 Motor Mount Alu complete set |
1 x | Propadapter for motor A50-V3 |
1 x | Backmountset complete A40 |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | MPX-Dean "T" Adapter |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA leading edge 8x10x1000 mm |
3 x | Balsa panel 6.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Motor OS MAX 120 AX |
1 x | OS Engine 105HZ-R Heli with pipe 105 |
1 x | Motor OS 15 LA |
1 x | Motor OS 55 AX |
1 x | Motor OS FS 95 V 4T |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | Balsa panel 5.0x100x1000 mm |
2 x | BALSA triangular 6x6x1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
3 x | Balsa panel 10x100x1000 mm |
1 x | Para-RC Mix |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Windsock Ozone L - 700 mm |
1 x | Parachute P4 |
2 x | Servo KST X20-7512 V8.0 82kg 8.4v |
2 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | Support Pitot JETI |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | PSC 6 |
2 x | Propeller APC 12x4.5 MR Electric Pusher |
3 x | 700 ml complete glow fuel tank |
1 x | Servo HITEC HS-75BB Retract |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Servo HITEC HS-55 |
1 x | Servo HITEC HS-7245MH |
1 x | Servo HITEC HS-45 HB |
1 x | Gear set HITEC HS-56 HB |
2 x | Soporte servo KST X08/H and Plus |
1 x | Support Filtro FESTO |
1 x | Support Flush MPX Conector (6 pcs) |
2 x | Soporte grifo FESTO (2 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
2 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support conector MPX (6 pcs) |
2 x | Support XT60 conector (2 pcs) |
2 x | Support pumb/filter Xicoy X45 |
2 x | Recessed MPX connector support (6 pcs) |
1 x | Support ECU Xicoy X-45 |
3 x | Propeller APC 16x5.5 MR |
3 x | Propeller APC 10x4.5 MR |
3 x | CC 01 |
3 x | Propeller APC 14x5.5 MR |
2 x | CC 03 |
2 x | HBC 10035-3 32-Bit |
3 x | TMM 2512-3S heli |
3 x | TMM 1210-3S heli |
1 x | Propeller APC 12x4.5 MR |
1 x | JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg) |
1 x | ALPHA 1000mm BL ARTR |
1 x | ALU servo arm 3 mm shaft |
2 x | Servo BLUE Bird BLS-H71B v2 |
2 x | ALU servo arm 90º 3 mm shaft |
2 x | ALU double servo arm 3 mm shaft |
2 x | Extinguisher CO2 - 2 Kg |
2 x | "L" servo arm 65x49 mm (2 pcs) |
3 x | Tyres 70 mm Xclaibur (2 pcs) |
3 x | Servo BMS-4112 |
2 x | Servo AN-20 MGBBA |
2 x | Servo AN-8 HBA |
2 x | ESC Ripmax QUANTUM 80A SBEC |
1 x | Servo HITEC HS-7975 TG |
1 x | Set propellers 5x3 Multicopter (2cw+2ccw) |
1 x | Servo HITEC HS-65 MG |
1 x | Servo HITEC HS-5685MH |
1 x | Servo HITEC HS-785 HB |
1 x | Servo HITEC HS-77 BB Low Profile |
1 x | Servo HITEC HS-85 BB |
1 x | Servo HITEC HS-645 MG |
1 x | Set propellers 10x4.5 SF Carbon Multicopter |
1 x | Servo HITEC HS-635HB Carbonite |
1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
1 x | Servo HITEC HS-82 MG |
1 x | Servo HITEC HS-5087 MH |
1 x | Servo HITEC HS-85 MG |
1 x | Servo HITEC HS-81 |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Servo HITEC HS-125 MG |
1 x | Servo HITEC D145 SW |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Propeller electric carbon 8.5x7 |
1 x | One touch canopy lock |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
2 x | Split pin 1x8 mm (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Pushrod octagone 3/2 |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | AXI 2826/10 V2 Long |
1 x | AXI 2826/6 V2 Long |
1 x | AXI 2814/20 V2 Long |
1 x | Servo HITEC D625 MW |
1 x | JETImodel DPS 40 |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Allen wheel collar M4x6 |
1 x | Propeller electric carbon 8.5x5 |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Pushrod octagone 4/3 |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Landing gear frontal support 25x32x16 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | Propeller POWER-PROP 10x7 |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Adapter lead MPX/XT60 |
1 x | Snap short M2 (10 uds) |
1 x | Servo FUTABA SBL 471 SV |
1 x | Selfstart electronic switch |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | UBEC 6A KAVAN |
1 x | Clip fixing for wing (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Propeller POWER-PROP 12x8 |
1 x | SPARK Switch 12v |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Propeller POWER-PROP 11x9 |
2 x | Servo FUTABA BLS175 SV |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Female connector for 16 pines AWG |
1 x | Propeller electric carbon 10.5x6 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Propeller electric carbon 9.5x5 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Propeller POWER-PROP 12x6 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Allen wheel collar M3x3 |
1 x | Propeller electric carbon 10.5x7 |
1 x | SPS Remote switch actuator |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | 3 LiPo XH>EH adapter |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fod Guard 73x32 mm |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Fully Threaded Steel Rod M3 |
1 x | Smokelance |
1 x | PT 22x10 EL Propeller |
1 x | PT 16x10 E Propeller |
1 x | Turbina X132 H "Compact Version" |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Round Rod 2,0x1000 mm |
1 x | PT 21x13 EL Propeller |
1 x | Variable Flow Smoke Pump System |
1 x | Strip 3,5x1,75x330 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Axle for AXI 5325/xx motors |
1 x | Axle for AXI 2820/xx motors |
1 x | Axle for AXI 4130 V2 motors |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Female connector for 6 pines AWG |
1 x | Axle for AXI 28269/xx motors |
1 x | Round Rod 1,0x1000 mm |
1 x | Axle for AXI 2814/xx motors |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | ESC KAVAN PRO-160HV Opto 160 Amp |
1 x | Axle for AXI 5345/xx motors |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | PYRO 750-50L |
2 x | KIRA 600-22 6,7:1 |
1 x | Oils Pumps Empty (1 liter) |
1 x | Short Switch On/Off micro |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Esc MasterSPIN 70 Pro OPTO |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Nylon Screw M6x40 |
1 x | Strip 2,0x2,0x330 mm |
1 x | AXI 2826/10 V2 |
1 x | AXI 2820/12 V2 |
2 x | AXI 2826/6 V2 |
1 x | AXI 2826/8 V2 |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | F-16 Falcon Black Knights 1:6 (1630 mm) |
1 x | ASPIRE Navy ARF 2.000 mm |
1 x | PYRO 650-103 Long Axi |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | Opto Gas Engine Kill Switch |
1 x | Smoke Oil Blue 5 l |
1 x | PYRO 900-52L |
1 x | Axle for motor A30-XL V2 |
2 x | Cable adapter iCharger |
1 x | SAVOX SH 0255 MG servo |
1 x | Fan for A60 |
1 x | Esc MasterBasic 90 Opto |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | Male Prolonger TP 4/5S |
1 x | Planetary Gear 3,7:1incl. mountingadapter, pinion |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | 45 mm rods set for direction control |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | AXI 2217/16 V2 |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Lock nut M4 (10 pcs) |
2 x | Screw M2.5x8 (10 pcs) |
2 x | Socket Head Screw M2x5 |
2 x | Screw M3x30 (10 pcs) |
2 x | Socket Head Screw M2x8 |
1 x | Screw M4x30 (10 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | AXI 2820/12 CYCLONE |
2 x | Propeller APC 14x5.5 MR Electric Pusher |
1 x | Servo Dymond D 37 Eco |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Pan head screw M2x16 PH |
1 x | Screw M3x12 (10 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | CC 11 Conector |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Metal gear set for HS81MG/5082MG |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Socket Screw M3x9 mm |
1 x | 12 mm floating pad (49 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Screw M4x20 (10 pcs) |
2 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | 15 mm floating pad (30 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Screw M3x20 (10 pcs) |
1 x | Floating M4 washer pad (36 pcs) |
2 x | AXI 2826/12 V2 |
1 x | QUANTUM II 55 Brushless Motor |
1 x | XCALIBUR Fuel Tank with built in UAT |
1 x | SUS wire 3m (nylon coated) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | AXI 2820/14 V2 |
1 x | PSC 5 |
1 x | AXI 4120/14 V2 |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | 8 mm Adapter for AXI53xx |
1 x | USBCOM 5i |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | RX external cable for estandar receivers |
1 x | GPS Logger Dymond |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | Servo BLS-M55B 61.2kg |
|
38,089.28EUR |