1 x | Vasa model Catapult |
1 x | Red smoke canister 140 g |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Blue smoke canister 140 g |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | White smoke canister 100 g |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Smoke set "S" |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | One touch canopy lock |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | "S" set for boats |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Yellow smoke canister 100 g |
3 x | White smoke bombs AX-18 (5 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Green smoke canister 100 g |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Covered closure or fairings |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Remote electric ignition system |
1 x | AX-60 starters (5 pcs) |
2 x | Ventral support for AX-18/AX-60 |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | XH female balance (3S) connector (2 pcs) |
2 x | Connectors banna oro 6,0 mm (M/F) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Conector Servo female 4 pines |
2 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | XH male balance (5S) connector (2 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Propeller balancer |
3 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
4 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Angle of incidence meter |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Angle measurer |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
3 x | 25 mm reinforced hinge |
1 x | Small pinned hinge (12 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Surface Indicator Gauge Small |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Gates hinge |
2 x | 15 mm reinforced hinge |
4 x | Propeller balancer |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Flap hinge (6 pcs) |
1 x | Field folding model stand |
3 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Joint with bearing M3 22x5,5 |
1 x | EC-Cutter |
1 x | 800TVL CMOS camera for FPV |
3 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | Medidor ángulos y/o incidencias |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Snap long M2 (10 uds) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Cockpit plastic closing |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Conector BEC female (10 pcs) |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Green smoke canister 65 g |
1 x | Parachutist |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Red smoke canister 100 g |
1 x | Conector BEC male (10 pcs) |
1 x | PCARD Wireless System |
1 x | Red smoke canister 65 g |
1 x | Blue smoke canister 100 g |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
3 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
3 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | Cockpit metalic closing |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Servo HITEC D950 TW |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
2 x | Servo HITEC D645 MW |
2 x | Pin hinge 39x20 mm (10 uds) |
2 x | Conector MT-60 (pair) |
1 x | MPX Support |
4 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Conector MR-60 (pareja) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Small flex hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | XT-60 connector (female) |
1 x | MPX PCB "4 Pins", 5 pieces |
3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Pin hinge 34x16 mm (10 uds) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | MPX PCB "6 Pins", 5 pieces |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | XH LiPo extension lead |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Conector XT-30 (macho) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Miniature brass strap hinge, 1 m |
1 x | Servo HITEC HS-55 |
1 x | Servo HITEC D625 MW |
2 x | Servo SAVOX SW-1250 MG digi |
2 x | Servo SAVOX SH 0257 MG |
2 x | Piñones SAVOX SH-0350 |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | SAVOX SH 0255 MG servo |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Servo HITEC HS-5245 MG Digi |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo SAVOX SA-1256 TG |
2 x | Servo HITEC HS-325 BB |
1 x | Servo HITEC HS-225 BB |
1 x | Servo HITEC HS-5485 HB Digi |
2 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Mounting frame MPX male connector |
1 x | Mounting frame MPX female connector |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | XT-60 connector (male) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Red 4 mm connector holder |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Protector Connector MPX (1 pair) |
1 x | LightBox SR |
2 x | 18 mm reinforced hinge |
2 x | Soporte carbono MR30 (2 pcs) |
1 x | Connectors MPX black male |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | MPX screwable clips (4 pcs) |
1 x | Robart Door Hinge (Pk2) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Conector XT-30 (hembra) |
2 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | BULL MØ1 2.600mm "RED BULL" |
1 x | BULL MØ1 2.600mm (mono color) |
2 x | BULL MØ1 2.600mm GREEN |
1 x | 3.17 mm Prop Adapter CN-Spinner |
2 x | 8 mm Adapter for AXI53xx |
1 x | BULL MØ1 2.600mm "McLAREN-GULF" |
3 x | BULL MØ1 2.600mm "AeroPANDA" |
1 x | BULL MØ1 2.600mm "ALPINE" |
2 x | 2,3 mm Prop Adapter M6 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Parachute expulsion foam |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Servo HITEC HS-65 HB |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Propeller MASTER 7x3 |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Adapter rotula M3 |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Ball Bearing Oil 25 ml |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Connectors DEANS (T) micro |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | EXTRA NG 85" 2159mm yellow/blue |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Servo HITEC HS-81 |
1 x | Carbon plate 350x150x4.0 mm |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Propeller 9x4,7 SlowFlyer |
2 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Propeller 9x7 SlowFlyer |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC HS-56 BB |
1 x | Adapter lead MPX/EC3 |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Dean "T" - Futaba Adapter |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | Adapter lead MPX/XT60 |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Servoarm Aluminium SH-82 |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | Servo SAVOX SA-1258 TG |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servo SAVOX SV-1261 MG |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Servo HITEC HS-311 |
1 x | Gear set HITEC HS-56 HB |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | Servo HITEC HS-45 HB |
1 x | Window mounting channel 5m |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Servo HITEC D131 MW nano |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Servo HITEC D951 TW |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo HITEC D85 MG |
1 x | Gear set HITEC HS-7950TH |
1 x | Servo HITEC D954 TW |
1 x | Gear set HITEC HS-225 |
1 x | Servo HITEC HS-5585MH |
1 x | Servo HITEC D941 TW |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Gear set HITEC D645 MW |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | 9x7 tree blades propeller |
1 x | Propeller MASTER 7x5 |
1 x | Propeller POWER-PROP 13x8 |
1 x | 15x7 tree blades propeller |
1 x | 12x8 tree blades propeller |
1 x | Bag connector 2 mm |
1 x | 6x4 tree blades propeller |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Conector JR Servo male (10 pcs) |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Servo Connector Brackets (10 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Red 3m5 mm connector holder |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
1 x | Frontal Adapter for AXI53xx |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | BULL MØ1 2.600mm RED |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1) |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | Blocking screws M6 gas engine |
1 x | Pinion 12 - 2 mm |
1 x | Tacometer mini ignition RCEXL |
1 x | Propeller diller for DLE170 |
1 x | Set wings Mini AVANTI S 1.4m W/B/R |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Sparkplug 1/4-32 |
1 x | Servo digital 17g MG - Std |
1 x | DLE 55 carburetor |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Telemetry interface ALTIS to Futaba |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Adapter SPEED 500/600 |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | Planetary gearbox(3,8:1) |
1 x | Pinion 24 - 3,2 mm |
1 x | Planetary gearbox(3,33:1) |
1 x | Extension Arm for Carburetor |
1 x | Bujia OS G5 gasolina |
1 x | Set EDF Mini Avanti Full Aluminium |
1 x | Race 300 |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | 4 mm Prop Adapter M8 |
1 x | Keypad ALTIS V4 |
1 x | Device Terminal |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | MultiLog Altimeter |
1 x | Excentric gearbox for 2,0mm axis (3,5:1) |
1 x | Filler Gauges |
1 x | Quick hose connector 4-3 mm |
1 x | 500 ccm gasoline fuel tank |
1 x | Excentric gearbox for 3,2mm axis (4,1:1) |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Planetary gearbox(3,33:1) |
1 x | Pinion 11 - 3,2 mm |
1 x | Excentric gearbox for 2,3mm axis (2,33:1) |
1 x | Pinion 18 - 3,2 mm |
1 x | Pinion 15 teeth (3:1) 2,3 mm axi diameter |
1 x | Planetary gearbox(3,33:1) |
1 x | Planetary gearbox(3,8:1) |
1 x | STD excentric gearbox for 2,3mm axis (2,33:1) |
1 x | BULL MØ1 2.600mm YELLOW |
1 x | "Taxi Tank" Fuel Tank |
1 x | Excentric gearbox for 2,0mm axis (3,75:1) |
1 x | Excentric gearbox for 2,3mm axis (3,5:1) |
1 x | Pinion 18 - 2,3 mm |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1) |
1 x | T-Hose connector 4-4-4mm |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 1.2L Kevlar tank for this mini SebArt Jet |
1 x | STD excentric gearbox for 2,0mm axis (3,5:1) |
1 x | STD excentric gearbox for 2,0mm axis (5,0:1) |
1 x | Adapter FUN 400/480 |
1 x | Mini Avanti S 1.4m yellow/black |
1 x | Spark motor OS nº 8 |
1 x | FUSELAGE STAND MINI AVANTI EDF/JET |
1 x | Mini Avanti S 1.4m white/red |
1 x | Reed valve for DA 50-R |
1 x | SAITO FG-36 carburetor |
1 x | Sparkplug ROSSI R8 |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Sparkplug 1/4-32 Glow |
1 x | DLE 111 pipe plug |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | Mini AVANTI S Jet , Carrying bags (SebArt) |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Extension Arm for Carburetor (red) |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Spark motor OS nº 3 |
|
65,231.60EUR |