1 x | Aramid 50 daN 50 m |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Rescue 1,8m2 / BackPack |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Miniature brass strap hinge, 1 m |
1 x | 1/6 Pilot "John" |
1 x | 1/7 Pilot "Japanese" |
1 x | Tapa estado carga XT-60 (6 pcs) |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Round Rod 2,0x1000 mm |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Extension silicon 100 cm (Futaba) |
3 x | Strip 2,0x2,0x330 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
3 x | Round Rod 1,5x1000 mm |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
3 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
3 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | 200 mm extensión servo HITEC/JR |
2 x | Canopy Latch |
3 x | Electric spoiler 250 mm (2 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
4 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | 3 LiPo XH>EH adapter |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
2 x | Baseplate servo |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 2 LiPo XH>EH adapter |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Digital weight, angle and balance meter BASIC |
3 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | 55% silver electrodes (2 pcs) |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | Balsa panel 8.0x100x1000 mm |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Copier 2x20 cm pcs |
2 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Crimping tool |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Copier 5x20 cm pcs |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
3 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Vasa model Catapult |
1 x | Extension 7.5 cm |
1 x | Premium servo extension 50cm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Extension 100 cm (Futaba) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Altimeter Altis NAO |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Device Terminal |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Cockpit plastic closing |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Steering arm 16 mm Ø 3 mm |
3 x | 38x4,5 mm wires output (2 pcs) |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
2 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Small aluminium horn red (2pcs) |
1 x | Micro control horn (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Strip ABS 2.0x8.0x1000 mm |
2 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Strip 3,5x1,75x330 mm |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Circlick securite |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Futaba male 40 cm extension |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Extension 30 cm (Futaba) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Premium servo extension 100cm |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Cabel "Y" 15 cm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension lead 15 cm Multiplex |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Extension 15 cm (Futaba) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Prolongador S-Bus JR/JR 10cm |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Premium servo extension 75cm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Telemetry interface ALTIS 6 cm |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Telemetry interface ALTIS to Futaba |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Carbon fiber rod 20 mmx1000 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Telemetry interface ALTIS 20 cm |
1 x | Allen wheel collar M3x5 |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Allen wheel collar M4x6 |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Lead with adhesive (2 pcs) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
2 x | 90x45 mm hard foam KOVO wheel |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | 800TVL CMOS camera for FPV |
3 x | Aluminium servo arm (2 uds) |
2 x | A/C economy plywood 600x300x6+.0 mm |
2 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | 89 mm aluminium spinner. |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
2 x | 95 mm aluminium spinner. |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
2 x | AC-10 pre-rotacion with motor |
2 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | Adap/Exten for Futaba 12-14C |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | Aero shocks |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | 82 mm aluminium spinner. |
2 x | 80x40 mm hard foam KOVO wheel |
1 x | Angle support XT60 conector |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Micro control horn T2 Ø 1 |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Rudder forward 70x28 "type Kato" |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Vacuum pump 12 CFM |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Servo holder for retract |
1 x | Servo Metal Horn 15.5 mm MKS |
1 x | Servo MKS 6100 DS |
1 x | Servo TOPMODEL DS1413 T |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon |
1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
1 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Welder 100W/200V |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Servo MKS HV747 |
1 x | Screwdriver for Torx® TX6 |
1 x | Starter Sullivan-STAR 601 |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Servo MKS HBL599 SL |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Servo MKS HV6120H |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | Servo TOPMODEL DS9010 T |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | 90x75 mm standart servo cover |
1 x | 57 mm micro-mini servo cover |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | 11 mm wing servo holder |
1 x | 27x10 prop Super Silence |
1 x | Propeller POWER-PROP 11x9 |
1 x | 6x4 tree blades propeller |
1 x | Propeller POWER-PROP 12x6 |
1 x | Propeller MASTER 6x4 |
1 x | Propeller MASTER 5,5x4 |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | 24x14 prop Super Silence |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | 11x7 tree blades propeller |
1 x | 12x8 tree blades propeller |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Propeller MASTER 5,5x4,5 |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller MASTER 7x4 |
1 x | Helice CLASSIC-Prop 20x10 |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | Propeller MASTER 7x3 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | 24x12 prop Super Silence |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 27x10 3-BL carbono-gas |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
3 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Hitec 52 mm servo arm |
1 x | Partall paste 650 g |
1 x | Female connector for 16 pines AWG |
1 x | 45 mm rods set for direction control |
1 x | Male connector for 12 pines AWG |
1 x | Gates hinge |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Round Rod 1,25x1000 mm |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Round Rod 4,0x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
2 x | Carbon plate 350x150x0.5 mm |
1 x | NF-1 RC set |
1 x | Carbon plate 350x150x1.5 mm |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | JETImodel SINGLE BEC |
1 x | DUPLEX 2.4 EX MBar |
1 x | Keypad ALTIS V4 |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Bungee HLG Premium |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Xplorer4 anemometro |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Hitec 20 mm servo arm |
1 x | Cable control set |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Round Rod 2,5x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Extension silicon 75 cm (Futaba) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | NF-2 RC set |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | 16mm Gear-Spotlight, 4W |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Caps multicolor Switch JETI |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Cable video GoPro and 5V cable |
1 x | Blind nut M8 (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | 70 mm aluminium spinner. |
1 x | Extension Arm for Carburetor |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Hot Glue Stick RED |
1 x | MR30 connector male |
1 x | Spinner 60 mm GFK |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Dust collector for mould cleaning |
1 x | LiPo Storage Box Type "BIG" |
1 x | Connectors DEANS (T) |
1 x | EME 55 cc carburetor WALBRO |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Female connector for 6 pines AWG |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Fod Guard 67x32 mm |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Female connector for 10 pines AWG |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Adapter rotula M3 |
1 x | Female connector for 20 pines AWG |
1 x | Allen wheel collar M4x4 |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Horn for flap control (1 pcs) |
1 x | Clip fixing for wing (2 pcs) |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Futaba 38 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Fod Guard 94x32 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Horn 5/15 with M2 Bearing |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Extension silicon 25 cm (Futaba) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | NF-3 RC set |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon plate 350x150x5.0 mm |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | NF-3X-350 set |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
3 x | Telemetry interface ALTIS 12 cm |
1 x | Neck strap JETI DS |
1 x | Snap short M2 (10 uds) |
1 x | Pushrod octagone 4/3 |
1 x | Pushrod greyline 4/3 with coupler M3 |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | AddCAP 10AS capacitors |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | One touch canopy lock |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | USB interface ALTIS |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
1 x | Neck strap JETI DC |
1 x | GPS Altis |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Cable video GoPro |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Carbon blade 3D 230 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Carbon blade 230 mm |
1 x | Captador RCEXL para DA |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Carburator Moki S250 |
|
24,029.99EUR |