2 x | Pine wood slat 10x10x1000 mm |
4 x | Pine wood slat 1.5x3.0x1000 mm |
3 x | A/C quality beech plywood 600x300x0.6 mm |
4 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
3 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
5 x | Extension silicon 10 cm (Futaba) |
1 x | Ferrita 27x14x7 mm |
5 x | Buy Perforated film 100 cm / 20 m |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
4 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
4 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
7 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
5 x | Cable silicona female batt. receptor 30 cm (Futaba) |
6 x | Cabel "Y" 30 cm (graupner) |
2 x | Extension silicon 50 cm (Futaba) |
4 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Circlick securite |
5 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
5 x | Futaba Female 40 cm extension |
4 x | Extension silicon 25 cm (Futaba) |
3 x | Extension silicon 50 cm (Graupner) |
5 x | Extension silicon 10 cm (Graupner) |
6 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
6 x | Extension 100 cm (Futaba) |
5 x | Extension silicon 100 cm (Graupner) |
6 x | Extension silicon 30 cm male (Graupner) |
4 x | Extension silicon 75 cm (Graupner) |
4 x | Cabel "Y" 30 cm (Futaba) |
3 x | Extension silicon 30 cm female (Graupner) |
6 x | Extension silicon 75 cm (Futaba) |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
5 x | Extension silicon 30 cm female (Futaba) |
5 x | Futaba Female 40 cm extension |
5 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
3 x | Futaba male 40 cm extension |
4 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
5 x | Extension silicon 100 cm (Futaba) |
3 x | Extension PVC 150 cm (Graupner) |
4 x | Extension silicon 25 cm (Graupner) |
4 x | Extension silicon 30 cm male (Futaba) |
5 x | Extension silicon 35 cm (Futaba) |
5 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Opale Rucksack |
4 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
7 x | 1,6x1000 mm 2:1 red termoretract tube |
3 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
4 x | PCARD Wireless System |
3 x | Monokote PLATINO metalizado (1.8x0.65m) |
2 x | ABS I Strip 10x5x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
7 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
4 x | ABS I Strip 20x10x1000 mm |
3 x | Silent-blocks DLE 170M |
2 x | White smoke canister 65 g |
2 x | Round Rod 1,5x1000 mm |
6 x | Spannlack 1000 ml |
2 x | L-Connector 1.0 mm x 1000 mm |
3 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
4 x | Green smoke canister 140 g |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
4 x | 4,8x1000 mm 2:1 black termoretract tube |
3 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Threaded coupler M3 (10 uds) |
3 x | PVC 0,14 qmm servo wire Futaba (5 m) |
2 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
3 x | XT-90 connector (pair) |
2 x | Yellow smoke canister 100 g |
4 x | Allen wheel collar M4x6 |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
3 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Oracover Black 2 m |
3 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
3 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Round Rod 2,0x1000 mm |
2 x | Horn 5/20 with M2 Bearing |
3 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
2 x | PVC transparent battery termo-retract 51 mm (1 m) |
4 x | Silicone red 0,25 mm² wire (25 m) |
3 x | Round Rod 1,25x1000 mm |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
2 x | Blue silicone 0,5 qmm wire (50 m) |
2 x | ORACOVER transparent Yellow (10 m) |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | Glases Innovation Plus |
1 x | Conector BEC male (10 pcs) |
4 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Connectors banna oro 3,5 mm (M/F) |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
5 x | 500 ml sealer (DOPE) |
2 x | L-Connector 1.5 mm x 1000 mm |
2 x | Ply-Span 450x600/13g Blue |
3 x | 41x5,5 mm wires output (2 pcs) |
3 x | Buy Perforated film 100 cm / 50 m |
4 x | Allen wheel collar M3x5 |
1 x | ABS angle 5,0x5,0x1000 mm |
3 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Oratex Natural White 2m |
4 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
3 x | Ply-Span 450x600/13g Black |
5 x | Allen wheel collar M4x4 |
2 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
4 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Horn 6/35 with M3 Bearing |
3 x | 10 mm floating pad (72 pcs) |
2 x | Round Rod 3,0x1000 mm |
4 x | Clip fixing for wing (2 pcs) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
3 x | Monokote BLUE metalizado (1.8x0.65m) |
2 x | Propeller balancer |
2 x | Strip ABS 2.0x8.0x1000 mm |
3 x | Silicone black 0,5 qmm wire ( 25 m) |
3 x | Strip 1,5x1,5x330 mm |
3 x | Angle of incidence meter |
4 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | 140 mm rods + T patellas set for direction control |
3 x | Cockpit aluminium closing |
2 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Medidor ángulos y/o incidencias |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Oracover Yellow CADMIO 2 m |
2 x | 100 mm rods set for direction control |
2 x | Hot Glue Stick BLACK |
4 x | Universal Colour Paste white 50 g |
2 x | Cut tube |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
3 x | Universal Colour Paste deep black 250 g |
2 x | Connectors banna gold 5,5 mm (M/F) |
3 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Cross Connector 4.0 mm x 1000 mm |
3 x | Oracover Azul 2 m |
2 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Aluminium red ball links M3 V1 (10 pcs) |
3 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Horn with ball 55x40 |
3 x | Blind nut M8 (10 pcs) |
2 x | Initior Transmitter FTX2 Wireless |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
3 x | Optotronix Aurora Plug |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Cable control set |
2 x | Ply-Span 450x600/13g White |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
2 x | 20 mm carbon horn |
2 x | XH female balance (3S) connector (2 pcs) |
2 x | Z type of cable coupler Ø 1 (2 uds) |
5 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
4 x | Painting GHT Lexan Black 150 ml |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
3 x | Green silicone 0,25 mm² wire (25 m) |
4 x | Presto SF Light Filler styrene-free (420 g) |
2 x | Profile ABS half cane 2.0x1000 mm |
3 x | Aluminium wide washer M3 blue (4 pcs) |
7 x | Plasti Dip Liquid Tape 429 ml black |
3 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
3 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
3 x | Green smoke canister 65 g |
2 x | Oracover Green10 m |
2 x | Oracover Azul Cielo 2 m |
5 x | Spray adhesive AEROFIX 2 |
2 x | Conector BEC female (10 pcs) |
2 x | PVC 0,08 qmm Futaba servos wire (5 m) |
2 x | Oracover Red 2 m |
4 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
2 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Connectors DEANS (T) |
2 x | Servo holder for retract |
3 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Strip 2,0x2,0x330 mm |
2 x | Blind nut M2 (10 pcs) |
2 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Horn 6/27 with M3 Bearing |
1 x | ABS angle 3,0x3,0x1000 mm |
3 x | 4,8x1000 mm 2:1 red termoretract tube |
4 x | Xplorer1 anemometro |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Starter EM Gear Power 250 |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
3 x | XT-60 connector (female) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | 2 mm male connector (2 pcs) with safety connector |
3 x | Xplorer4 anemometro |
3 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Tray JETI for DS-14/16/24 Black |
1 x | Connectors DEANS 4 pins (1 pair) |
4 x | ABS tube 5.0x3.0x1000 mm |
4 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
3 x | XT-30 connector (pair) |
2 x | Aluminium M2x12 mm screw (4 pcs) |
5 x | ARAMID honeycomb 1300x2600x2 mm |
3 x | "S" set for planes |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | Motor DLE 200cc Premium Muffler |
5 x | Servo arm with 6 mm hole to FEMA 9800A |
2 x | ABS tube 6.0x4.0x1000 mm |
2 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Small aluminium horn blue (2pcs) |
2 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Profile ABS Square 1 x 1000 mm |
2 x | Angle measurer |
3 x | Cable grommet Ø 6.4 mm (4 uds) |
7 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | AX-60 starters (5 pcs) |
3 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Aluminium wide washer M4 Black (4 pcs) |
5 x | Oracover CARBON Metalic 1 m |
4 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
4 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
2 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
2 x | B4-0 rocket charges (6 pcs) |
1 x | Glider IKARUS |
1 x | SHK 4000 mm Scale 1:4.25 |
3 x | Silicone red 0,75 qmm wire ( 1 m) |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
4 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
4 x | L-shaped servo mount |
4 x | Smoke pump RCEXL |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
3 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Swift S1 De-luxe 3.140 mm |
2 x | White silicone 0,25 mm² wire (25 m) |
6 x | ABS tube 16.0x14.0x1000 mm |
1 x | Connectors MPX male (PIN double) |
3 x | XT-60 connector (male) |
1 x | Kobuz 5000 mm (Airwold) |
5 x | White silicone 0,25 qmm wire (100 m) |
5 x | Buy Perforated film 145 cm / 50 m |
4 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
4 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | LO 100 ARC 3.3m |
2 x | ABS tube 14.0x10.0x1000 mm |
4 x | Tube Pitot to PIXHAWK |
3 x | Foam plastic plates (310x210x5 mm) |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | SAGITA Alsema 4.0 m |
2 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | ABS angle 10,0x10,0x1000 mm |
3 x | Cable tie mounts 4.3 (4 uds) |
2 x | Extractor piñones 2.3/3.2 mm |
2 x | LO 100 ARC 3.3m,frame canopy |
2 x | PRO-HV Dual Action Valve |
2 x | Black silicone 0,25 mm² wire (25 m) |
4 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
3 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
1 x | Sub-D Plug Mold |
2 x | Metal gear set for HS81MG/5082MG |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
3 x | Oracover Yellow CUB 2 m |
2 x | 45 mm rods set for direction control |
3 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Savox Brushless Servo SC-1267 SG |
3 x | Universal Filter |
3 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
3 x | White silicone 0,25 qmm wire (150 m) |
2 x | 6 mm blue aluminium threaded horn with patella |
4 x | ABS tube 9.0x7.0x1000 mm |
2 x | 22m Fitting barb |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | VPP system propeller for AXI VPP motors (spare) |
4 x | Z-shaped servo mount |
3 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | ALU-STAR Digi double servo arm |
4 x | Neumatic retractable landing gear (Aero-Naut) |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | 45 mm rods + T patellas set for direction control |
4 x | ABS tube 4.0x2.0x1000 mm |
1 x | FESTO connector M7 Quick 6mm 90º |
4 x | PIX Hawk with accesories |
2 x | XH male balance (2S) connector (2 pcs) |
2 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Wood servo holder (2 pcs) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
3 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
4 x | ORACOVER Ferrari red (2 m) |
2 x | Silicone red 1,0 qmm wire ( 1 m) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | U Profile ABS 2,0x4,0x1000 mm |
4 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
3 x | Towing hook <3m |
2 x | Welder 100W/200V |
2 x | Starter Sullivan-STAR 601 |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
3 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Futaba BLS152 - Upper Case |
3 x | Canopy Lock V1 M3 Red (2 pcs) |
4 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
3 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | XH LiPo extension lead |
3 x | Strip 3,5x1,75x330 mm |
2 x | Silicone black 2,5 qmm wire ( 1 m) |
2 x | Round Rod 5,0x1000 mm |
4 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
3 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
2 x | LiPo Storage Box Type "BIG" |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
4 x | "S" set for boats |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | Glider KNIRPS |
3 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Servo RHINO pro SHV digi 4 |
5 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Connectors MPX black male |
2 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | Spark motor OS nº 3 |
2 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | FESTO connector M5 Quick 6 mm |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Split pin 1.6x16 mm (10 uds) |
4 x | ABS tube 7.0x5.0x1000 mm |
2 x | ABS tube 10.0x8.0x1000 mm |
5 x | ABS tube 4.0x3.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
3 x | ABS tube 8.0x6.0x1000 mm |
2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | ABS tube 18.0x16.0x1000 mm |
2 x | ABS tube 8.0x7.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
2 x | ABS tube 9.0x8.0x1000 mm |
2 x | ABS tube 3.0x2.0x1000 mm |
3 x | ABS tube 12.0x10.0x1000 mm |
3 x | ABS tube 5.0x4.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
3 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
4 x | ABS tube 3.0x1.0x1000 mm |
4 x | ABS tube 6.0x5.0x1000 mm |
3 x | ABS tube 20.0x18.0x1000 mm |
3 x | ABS tube 3.0x2.0x330 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
3 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
2 x | SIG Coverall 1.2x0.9 m |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
2 x | Z type of cable coupler Ø 1.8 (2 uds) |
4 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
3 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | T-shape holder metal LAMA |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
5 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Z Bender - S Type Tool |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
5 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Gobe R-26S (Airwold) |
4 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | SIG Coverall 1.2x1.8 m |
2 x | Oracover Yellow CADMIO 10 m |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
3 x | 3l Smoke oil |
2 x | Electric Fuel pump |
2 x | Snap short M2 (10 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
4 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Bob airtrap set |
4 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | X-RAY Micro QR (Tail Tube) |
2 x | PowerFuel RX V2 Fuel Pump |
2 x | Short adjustable control horn 3x24 |
2 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
2 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
2 x | Variable Flow Smoke Pump System |
5 x | Spray Graphit 33 |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Albatros ,spare fuselage (Top Model) |
2 x | Small aluminium horn gold (2pcs) |
2 x | FESTO connector M7 Quick 6 mm |
3 x | Conector Servo female 4 pines |
1 x | Horn 20x28,5 mm (2 pcs) |
5 x | Silicone black 4,0 qmm wire ( 1 m) |
3 x | Silicone red 1,0 qmm wire (100 m) |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
3 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Electron 22 mm Fitting barb |
2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
3 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Swing 1000 |
1 x | Gold antispark 5,5 mm plug |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
2 x | L-Connector 4.0 mm x 1000 mm |
2 x | Pipa BULL MØ1 2.600mm |
1 x | 12.7 mm 2:1 black termoretract tube |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | Kit hydraulic brake |
2 x | Quick hose connector 3-3 mm |
4 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Hot Glue Stick RED |
1 x | Fournier RF-4D |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | SERVO DES 707 BB MG |
1 x | Neck strap JETI DS |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | XH female balance (5S) connector (2 pcs) |
2 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Oracover White 10 m |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
3 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
5 x | Fiberglass plate 350x150x0.5 mm |
3 x | Stainless steel cable Ø 0.5 mm (2 m) |
4 x | 12 mm floating pad (49 pcs) |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Alu servo arm double RHINO |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
4 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Ion Pro, Elevator (JP Model) |
1 x | Flex-headers for Valach VM 85B2-FS |
4 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | Crystal Universal RX 35.140 Ch 74 |
3 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
4 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
2 x | AXI 2808/16 V2 |
2 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | ASK 21 6.8m |
2 x | T-Connector 4.0 mm x 1000 mm |
1 x | XH male balance (9S) connector (2 pcs) |
3 x | ABS Strip 1.5x8.0x1000 mm |
2 x | MIG 29 3D RTF, Servo |
2 x | DUPLEX Satellite receiver Rsat 900 |
3 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
2 x | Swashplate metal LAMA |
1 x | ALBATROS 3.0 m (orange/white) |
3 x | Motor DLE 170 M- Paramotors |
1 x | AXI 2814/6D V2 |
2 x | SAVOX SH 0255 MG servo |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
5 x | 19 mm 2:1 black termoretract tube |
4 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | AXI 2826/12 V2 |
2 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Air Trap Mounting - 175ml |
2 x | Superlight deluxe wheel 40 mm (2 pcs) |
2 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Metal clevis M3 (10 uds) |
2 x | Servo arms set 40/50/55/5055 MG |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
3 x | Red smoke canister 65 g |
3 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
2 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Window mounting channel 5m |
4 x | 140 mm rods set for direction control |
2 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Fresa corte diamante Ø 1.0mm (bola) |
4 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Banna gold connector 2,5 mm (M/F) |
5 x | ABS Strip 1.5x4.0x1000 mm |
1 x | 500 ccm gasoline fuel tank |
1 x | ESC 40A. Opto starter Kolm |
5 x | MYLAR film A350 (1000x500 mm) |
3 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Threaded coupler M2 (10 pcs) |
2 x | Spinner 55 mm White (Kavan) |
3 x | 55% silver electrodes (2 pcs) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | AXI 4130/16 V2 |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Servo SAVOX SA-1256 TG |
2 x | Tool for entel |
1 x | Combo lighting module with covering drop shape |
2 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Ply-Span 450x600/13g Red |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace) |
1 x | Round Rod 1,0x1000 mm |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
3 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Pulley brass 14/2 (2 pcs) |
3 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Actuator Electric 25 mm |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
3 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | EDGE 540-A 74" (1880 mm) |
2 x | Yellow smoke canister 65 g |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | Shaft sleeve LAMA |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | ASK 21 6.5m + pylona |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | AXI2217/9D |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Couple M4 for wire (10 pcs) |
1 x | PowerBox Smokepump |
2 x | Monokote BLANCO jet (1.8x0.65m) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
4 x | Silicone red 1,5 qmm wire ( 25 m) |
2 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
1 x | PARTENAVIA 2020 mm ARC with Flaps |
1 x | DUPLEX R14 receiver 2,4GHz |
2 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | XH female balance (8S) connector (2 pcs) |
2 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Sparkplug NGK CM6 |
1 x | Snap for floding prop for 2 mm axi |
1 x | Racor 4/3 mm |
1 x | 18m Fitting barb |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
4 x | Locking cable tie 2.5x100 (uds) |
2 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
2 x | Silicone red 2,5 qmm wire ( 25 m) |
1 x | Blades 330mm |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | |
1 x | Nylon gear block Ø 5 mm (2 uds) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Fascination 3600 mm ARC |
3 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | 290x4 mm M4 shaft ship |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
3 x | Xplorer2 anemometro |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | DYMOND VTX UBS Programming adapter |
3 x | Aluminium battery holder red |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace) |
3 x | Glases Nimbus |
1 x | AXI 5345/18 HD V2 |
1 x | Head core bushing |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | 30 cm DEANS female connector |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
2 x | Servo SAVOX SV-1260 MG |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Quick hose connector 4-4 mm |
3 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | BABY glider (Aero-naut) |
1 x | SUS wire 3m (nylon coated) |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
5 x | 25 mm carbon servo arm |
2 x | Opto Gas Engine Kill Switch |
1 x | Vess propeller 11x7 S |
1 x | Hose stopper 4 mm |
1 x | AXI 5320/18 V2 |
1 x | T-Hose connector 3-3-3 mm |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | AXI 2814/16 V2 Long |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
3 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
2 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | NF-1 RC set |
1 x | Superlight deluxe wheel 45 mm (2 pcs) |
1 x | Cierva C30 Elevator |
1 x | AXI 5345/16 HD V2 |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Propeller CFK 16x16 Wide |
3 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | AXI 2808/24 V2 |
3 x | PVC plate 320 x 194 x 0.23 mm (brown) |
5 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Roller cutter 28 mm |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | PowerBox Smokepump JETs 2x outside |
2 x | Receptor FUTABA R7003SB FASST |
3 x | Glases Nimbus "Black" |
2 x | Horn 5/15 with M2 Bearing |
1 x | Rotorshape Elevator |
3 x | Hobbylite Filler, Balsa colour |
1 x | Horn with ball 40x30 |
2 x | Fiberglass plate 350x150x1.0 mm |
1 x | AXI 5325/20 V2 |
3 x | Xplorer3 anemometro |
1 x | 15 mm reinforced hinge |
2 x | Glass fabric 49 g/m² (1,27 x 20 m) |
5 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | LA500 nose |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
4 x | ABS tube 5.0x4.0x156 mm |
2 x | Locking cable tie 4.6x203 (uds) |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
2 x | "Taxi Tank" Fuel Tank |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | 1,5x50 mm allen screwdriver |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | Selfstarr EME35 |
1 x | Receiver DUPLEX REX 3 2.4 GHz |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Head lower part |
2 x | Cable coupler M3 (10 uds) |
1 x | Propeller CFK 14x8 Slim |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
2 x | Pushrod greyline 4/3 with coupler M3 |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
3 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Protector Connector MPX (1 pair) |
1 x | Gearbox KPG25 4,2:1 |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Propeller CFK 15.5x10 |
3 x | Covered closure or fairings |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
1 x | Rotorhead pushrod |
1 x | Sparkplug 1/4-32 |
1 x | AXI 5320/34 V2 |
1 x | Spinner INOVA 45 mm White |
3 x | Silicone black 4,0 qmm wire (25 m) |
2 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | SERVO DES 568 MG |
1 x | XH female balance (9S) connector (2 pcs) |
3 x | Surface Indicator Gauge Small |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Landing gear frontal support 25x32x16 |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | AXI 5345/18HD V2 3D Extreme KV171 |
1 x | KIRA 600-30 6,7:1 |
4 x | Servo Mount S (red) |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
2 x | Threaded coupler M2,5 (10 pcs) |
2 x | Propeller CFK 14x7 |
1 x | Racor 3/3 mm |
1 x | AXI 2204 Multicopter |
1 x | Small adjustable control horn with bearing |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | Central piece 52 mm - 5º |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Fascination 3600 mm, Canopy (Top Model) |
1 x | wire tensioner (black) |
3 x | Ply-Span 450x600/13g Yellow |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | NF-2 RC set |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Micro control horn (2 pcs) |
2 x | Servoarm Aluminium SH-82 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Central piece 47 mm + 2,5º |
1 x | Central piece 42 mm - 5º |
2 x | RCEXL Electronic ignition twin A-02 |
1 x | 29x12 prop Super Silence |
3 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
1 x | Gear for D 200 BX |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Air pressure gauge |
1 x | NF-3 RC set |
1 x | Crystal TX 35.010 Ch 61 |
2 x | PVC transparent black termo-retract battery 185 mm (1 m) |
2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
4 x | PARTALL® Hi-Temp Wax, 340 g |
2 x | Copier 2x20 cm pcs |
3 x | PPM Encoder Module |
3 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Head upper part |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | DIVA cabin cruiser |
1 x | Spark Plug BRISK M14x1.25 |
1 x | Cierva C30 Body Spain |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Pilot LA 500 |
1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
3 x | Ball Link Plier |
3 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | BIG MOSNTER |
2 x | Film release agent PVA 25 ml |
4 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Magnetic Connect locking system |
1 x | Quadcopter Q50 Kit Carbon Fiber |
2 x | Recess mount-rem. glow plug set |
1 x | 22x10 prop Super Silence |
3 x | Mini neumatic retract landing gear |
3 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | 46 mm Futaba servo arm tandem with ball link |
3 x | Partall paste 650 g |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Small kwik link (10 pcs) |
1 x | Check valve V2 |
1 x | 10 mm gas motor standoff |
3 x | 1000 ml sealer (DOPE) |
1 x | AXI 2212/26 V2 |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | 3-blades 24x12 carbon prop Super Silence |
2 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
2 x | Carbon plate 350x150x2.0 mm |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Futaba 38 mm servo arm with ball link |
4 x | 11 mm Rubber pads (14 pcs) |
1 x | Superlight standard wheel 100 mm (2 pcs) |
3 x | 22 mm Cut Disc Proxxon/Dremmel |
3 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Wire easy tensioner (red) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | SAVOX SH 0254 servo |
1 x | 57 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
2 x | Metal clevis M2,5 (10 uds) |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
3 x | M3 Maxi ball link (2 uds) |
2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
3 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
1 x | Spinner 40 mm Black (Kavan) |
1 x | Rudder tandem for two Futaba servos |
2 x | 5 line servos wire black (1 m) |
1 x | Propeller VESS 27A |
2 x | Motor DLE 200cc Std |
4 x | SlowFlyer control horn (3 pcs) |
1 x | Balls 4 mm |
1 x | TopFuel LiPo 35C-X 5000mAh 6S |
2 x | Oracover Orange 2 m |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | KIRA 400-34 |
2 x | Hose connector stopper 4 mm |
1 x | 500 ccm complete gasoline fuel tank |
4 x | Styrene plate 320x120x1.0 mm |
1 x | Silicone black 1,5 qmm wire ( 25 m) |
2 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | 50 mm white plastic spinner for folding propeller |
2 x | Silicone red 1,5 qmm wire ( 1 m) |
2 x | Cable coupler M2 (10 uds) |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Micro control horn T2 Ø 1 |
2 x | Canopy Latch |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | 40 mm white plastic spinner for folding propeller |
3 x | |
4 x | 20 g tin paste |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Propeller CFK 11x8 |
1 x | MAMBO 17 |
2 x | RB-45 Electronic |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
2 x | PVC grid diagonal 290x185x0.32 mm |
2 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | THERMIK XL 4000 mm |
1 x | LA500 freewheel bearing |
3 x | Starter 12v (Max 90 and 15ccm) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
2 x | Remolcador "Jonny Hafenschlepper" |
1 x | Spinner plastic white fixed propeller 45 mm |
2 x | Digital weight, angle and balance meter BASIC |
1 x | Switch Cap L (Red) |
2 x | PVC grid straight 290x185x0.32 mm |
2 x | Spinner 50 mm White (Kavan) |
1 x | F450/550 Quadcopter, landing gear |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Foam plastic plates (310x210x8 mm) |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Motor mount VANQUIST 48" F3A |
2 x | Small aluminium horn red (2pcs) |
3 x | Motor DLE 430 cc - Paramotors |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
3 x | Servo Mount M (blue) |
2 x | AXI 2820/10 V2 |
1 x | Propeller CFK 16x17 |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | 63 mm INO spinner (carbon imitation) |
2 x | Carbon plate 350x150x1.0 mm |
2 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Glider Ka 7 Red (2540mm) |
3 x | Big Crow DLE-170M |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
2 x | AXI 2826/12 V2 Long |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Retract Landing gear ER40 Combo Xcalibur complete |
2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
2 x | Handle for PERMAGRIT lime |
2 x | Fully Threaded Steel Rod M3 |
1 x | Head lower part New |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Astra (Top Model) |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Axle wheel with accesories |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | 102 mm INO spinner (carbon imitation) |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | DPSI V-Match |
1 x | Screw M3x16 |
1 x | Body for landing gear Ø 4 mm |
2 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Motor holder for AC 28/7 |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | KONDOR 15-92 |
1 x | MPX screwable clips (5 pcs) |
1 x | MPX Support |
1 x | 2,0x50 mm allen screwdriver |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Tow hook for tug |
2 x | Transmitter Balancer Futaba V |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
3 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | PHASOR RACE 2035/2100 2D |
2 x | 15 mm floating pad (30 pcs) |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
2 x | Horn 6/20 with M3 Bearing |
3 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Central piece 38 mm 0º |
2 x | Copier 5x20 cm pcs |
2 x | AXI 2808/20 V2 Long |
1 x | TopFuel LiPo 35C-POWER-X 2400mAh 2S |
1 x | Battery LiPo TATTU 12000 mAh 4S 14,8V 15C |
1 x | Three-function control switch by FUTABA |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | KIRA 480-38 |
1 x | Savox Brushless Servo SB-2271SG |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 3S |
3 x | Carbon fibre sandwich sheet 350x150x3 mm |
3 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
3 x | Oracover Brown 2 m |
1 x | Spinner 60 mm White (Kavan) |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
2 x | Digital scale up to 40 kg |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | TopFuel LiPo 25C-ECO-X 900mAh 2S |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Bearing 3x6x2,5 |
3 x | 13 mm wing servo holder |
2 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Universal batery Tester |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | 64 mm aluminium spinner |
1 x | Propeller CFK 14x8 |
2 x | TAKEO 3.6m electric |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Battery LiPo TATTU 2300 mAh 3S 11,1V 45C |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
1 x | 3-blades 29x12 carbon prop Super Silence |
2 x | Glases Ace |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Pilot Lotsenboot |
1 x | Jet Afterburner Simulator NF-Jet2 |
3 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | DPS Switch Ampere |
1 x | wire tensioner (blue) |
1 x | 3-blades 21x12carbon prop Super Silence |
4 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | PowerBox Evo |
3 x | Round Rod 2,5x1000 mm |
1 x | Battery LiPo GENS 6000 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
2 x | Switch Cap L (Blue) |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
2 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
2 x | Smoke set "M" |
2 x | 28x5 mm wires output (2 pcs) |
1 x | DUPLEX R6 receiver REX Assist |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Resistor 3W 5% OR47 |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace) |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
2 x | Ply-Span 450x600/13g Orange |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
3 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
2 x | Servo Dymond D 37 Eco |
1 x | Steering lever |
1 x | Set Legs + Wheels with brake ASPIRE |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
2 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Fuel line plugs (Black) |
1 x | Steel brush wheel with 2.35mm |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
3 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | R617 FS 2,4 GHz receiver |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Propeller diller for DLE170 |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Central piece 42 mm + 2,5º |
2 x | 57 mm micro-mini servo cover |
3 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Gracia Maxi ARF, bags (Top Model) |
2 x | White smoke canister 100 g |
2 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Servo SAVOX SA-128S SG |
2 x | XH male balance (3S) connector (2 pcs) |
1 x | Gearbox KPG25- 5,2:1pinion |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Cooler motor type 150 |
1 x | Ion Pro, Fuselage (JP Model) |
1 x | AXI 5330/18 V2 |
2 x | GRAFAS MAXI ARF |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
2 x | Servo DITEX EL0510M |
2 x | ABS 500 x 400 x 1 mm (white) |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Race 650 Johnson motor 7.2v |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Chopped glass fibre strands 3 mm |
2 x | Motor wall |
1 x | Wheel keeper washer |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
2 x | AXI 5325/34 V2 |
1 x | MythoS 50E Yellow/Black |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | F3A carbon 80 mm spinner for Spark EVO |
1 x | Rotorshape Autogyro |
1 x | 51 mm aluminium spinner. |
1 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
1 x | GPS Expander Module |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Round Rod 1.0x3.5 cm |
1 x | Central piece 47 mm + 5º |
1 x | Blade holder upper |
1 x | Spinner plastic 63 mm Red 2Bl |
1 x | Motor Advance 30-10 F3A |
1 x | Wire easy tensioner (silver) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace) |
2 x | SOLOFOX 5m Voll-GfK |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
2 x | Aluminium ignition bad (blue) |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
1 x | USB Interface Adapter |
3 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Retract Landing gear ER40 Combo Custom complete |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | 25 mm Sandpaper file |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
4 x | Dust collector for mould cleaning |
3 x | Spray EC Red 400ml |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Battery LiPo GENS 5800 mAh 4S1P 14,8V 45C (Gens Ace) |
1 x | JM electric Pump |
3 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
4 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | Landing gear retract neumatic (Jet Legend) |
1 x | Landing gear strap small (4 uds) |
1 x | Adapter rotula M3 |
1 x | LightBox SR |
2 x | Connectors banna oro 6,0 mm (M/F) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Nose leg 155 mm with wheels 70 mm |
3 x | Blue smoke canister 140 g |
2 x | RH long aluminium horn (2pcs) |
1 x | DUPLEX RC Droid Box - DC/DS |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Baering 3x8x4 |
2 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | FESTO connector M5 Quick 4 mm |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | AXI 5325/16 V2 |
4 x | Solvent Plasti Dip 1000 ml |
2 x | Round Rod 6,0x1000 mm |
2 x | Adjustable launching hook |
1 x | DPSI OCP Overload protection |
1 x | 82 mm INO spinner (carbon imitation) |
2 x | Small Crow DLE-170M |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | R6106 HF 2,4 GHz receiver |
2 x | Rubber profile 8-2 mm 2M |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Connector Sub-D 2+5 Male |
4 x | A/C quality beech plywood 600x300x5.0 mm |
4 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Servo HITEC HS-55 |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Propeller POWER-PROP 13x10 |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Ball Link Plier |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Red smoke canister 100 g |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | E_brakes electronics |
1 x | Connectors DEANS (T) micro |
1 x | Gear set HITEC HS-311/322/325BB |
3 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Extra long horn 60x30 |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 17x8 BIELA propeller |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Mono-Switch Memory FUTABA |
1 x | Ferrita 14x8x5.5 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Propeller POWER-PROP 9x5 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Propeller MENZ-S 21x12 |
3 x | Birch plywood plate 600x300x3.0 mm |
1 x | Servo HITEC D951 TW |
3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | 39,0 mm propeller (left propeller) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
3 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Servo HITEC HS-5085 MG Digi |
2 x | Flat washer 2.2 mm (20 pcs) |
2 x | CC 05 |
2 x | 3,9 mm ZG20-ZG38 servo arm |
2 x | Profile ABS half cane 6.0x1000 mm |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | 18x10 BIELA propeller |
2 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | EXHAUST STACK Ø 25 mm GP-61/123 |
1 x | Propeller MENZ-S 18x10 |
2 x | 1/4 Pilot "Mike" |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | M3 black washers (4 pcs) |
1 x | 3,0x60 mm allen screwdriver |
4 x | Propeller 8x4,3 SlowFlyer |
2 x | SATORI 2 PRO V C64 F5J |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | 80 mm rods set for direction control |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
2 x | Propeller POWER-PROP 12x6 |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Conector JR Servo female (10 pcs) |
3 x | BALSA triangular 15x15x1000 mm |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
2 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Stickers-digit for marking |
1 x | CRACK YAK (Mini) 600 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
2 x | Propeller POWER-PROP 13x8 |
2 x | 1/6 Pilot "Buddy" |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
2 x | 1/6 Pilot "Cindy" |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Servo MKS 6100 DS |
1 x | Male connector for 12 pines AWG |
1 x | Porpeller HUNTER 480 |
1 x | DLE Ignition 170M |
2 x | Glases Aspen |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Dremel 3000 130W |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Set propellers 8x4.5 SF Carbon Multicopter (1x R - 1x L) |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
3 x | 26x8 BIELA propeller |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Actuator Electric 25 mm HIGH TORQUE |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | SSPS105 Super Hi-Power servo |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Kerostarter K30G |
1 x | M3 Maxi ball link (2 uds) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Ball link M2 (10 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
3 x | Vasa model Catapult |
4 x | Carbon fiber rod 2.5 mmx1000 mm |
2 x | Paint gun for sprays |
1 x | Profile ABS half cane 5.0x1000 mm |
2 x | Propeller electric carbon 9.5x5 |
3 x | Gates hinge aluminium (1 pcs) |
2 x | 6 mm Prop Adapter M8 |
1 x | Kwik link unmount tool |
1 x | Propeller MENZ-S 16x8 |
2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Cap Hispano Aviación |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
3 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Servo HITEC HS-5585MH |
1 x | Servo HITEC D625 MW |
4 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | Transmitter JETI Duplex DS-24 EX Carbon Line Multimode |
3 x | Carbon fiber rod 20 mmx1000 mm |
2 x | 1/12 Pilot "Cougar" |
1 x | 2 mm Prop Adapter M6 |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
3 x | quality beech plywood BIRCH 600x300x2.0 mm |
3 x | Propeller POWER-PROP 15x10 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Nut for mounting M5 (4 pcs) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Propeller electric carbon 7x7 |
2 x | 1/7 Pilot "Japanese" |
1 x | Motor RACE 20 Navy 12v |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Propeller hub spacer 8/5.5 |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Starter Sullivan-STAR 603 DINATRON |
4 x | OBECHI sheet 2.0x3.0x1000 mm |
3 x | Propeller POWER-PROP 7x7 |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Motor mount M |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | 120x60 mm C SLH KOVO wheel |
2 x | Balsa panel 1.0x100x1000 mm |
2 x | 24x12 BIELA 3Bl propeller (3-blades) |
1 x | Xoar Electric Beechwood Prop 21x10 |
2 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | 23x8 BIELA propeller |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | MXS-C (Mini) Blue |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Strut Set ODYSSEY (without wheels) |
1 x | EC-Cutter |
2 x | Gear set HITEC HS-55 |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Round flex hinge (12 uds) |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Rudder 2_Tray 4.5~5 inch |
1 x | LUCAS pilot ARTF |
2 x | Piloto Jet "Red" 1/6 Scale |
2 x | 1/6 Pilot "John" |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Flat washer 3.2 mm (20 pcs) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | 4 mm Prop Adapter M6 |
1 x | 2,5x60 mm allen screwdriver |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | 4 mm Prop Adapter M8 |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
2 x | Propeller 3x2 |
1 x | Glass fabric 25 g (2 m²) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Sealing Iron Sleeve PROF |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | CM-3 |
2 x | AXI 2217/20 V2 Long "F5J" |
2 x | Allen wheel collar M3x3 |
2 x | Balsa panel 10x100x1000 mm |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Tube bender |
1 x | Connectors banna oro 8,0 mm (M/F) |
2 x | Ball link M1.6 (6 uds) |
1 x | Propeller electric carbon 10.5x7 |
1 x | Ball link M3 (10 pcs, flat ball) |
2 x | 800TVL CMOS camera for FPV |
1 x | 1/10 Pilot "Jack" |
1 x | Propeller electric carbon 10x6 |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
2 x | Nut for mounting M6 (4 pcs) |
1 x | Ring 320 mm length (5 pcs) |
2 x | Nut for mounting M4 (4 pcs) |
1 x | Electromagnets brake |
1 x | 4 LiPo XH>EH adapter |
1 x | Cable set PREMIUM , fuselage/wing one4one |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Smoke set "S" |
1 x | Indoor hinge with servo arm integraded |
1 x | 5 mm gas motor standoff |
1 x | Female connector for 16 pines AWG |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | UBEC 6A KAVAN |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Carburetor DLE 170 |
1 x | Ferrita 17x10x6.5 mm |
1 x | Long pinned hinge (6 uds) |
1 x | 32x10 BIELA propeller |
2 x | Propeller MENZ-S 18x10 3-Blades |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Servo HITEC HS-53 |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
1 x | Propeller electric carbon 9.5x6 |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Glases Stratus |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Set propellers 5x3 Multicopter (2cw+2ccw) |
1 x | Female connector for 20 pines AWG |
2 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
3 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | MPX-Dean "T" Adapter |
1 x | Gear set HITEC HS-7950TH |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | 16x8 BIELA propeller (3-blades) |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Left hydropropeller) |
2 x | Conector FUTABA Servo male (10 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | EnLink 2RS Plus - DUO |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | SUPER DIMONA TC-80 |
2 x | Balsa panel 6.0x100x1000 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Tank gas KUZA 260 cc |
2 x | 15x7 tree blades propeller |
1 x | 1/4 Pilot "Heidi" |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Servo HITEC D950 TW |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | 26x12 BIELA 3Bl Pusher propeller |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | 6 mm aluminium horn with patella |
1 x | White large kwik link (10 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Servo HITEC D941 TW |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Green smoke canister 100 g |
1 x | 22x8 BIELA propeller |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Joint with bearing M2 22x5,5 |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Silentblock DLE 170M |
1 x | Pilatus PC-21 2100 mm RED/WHITE (SebArt) |
1 x | Propeller POWER-PROP 10x7 |
2 x | Initior Receiver FRX2 Wireless |
1 x | Para-RC Mix |
2 x | Styrene plate 320x120x0.5 mm |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Rudder 2_Tray 4~4.5 inch |
1 x | Micro clevis (10 uds) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Metal ball clevis M3 (10 uds) |
2 x | White smoke bombs AX-9 (10 pcs) |
1 x | Smoke set "Glider" |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | DC-3 Douglas (DAKOTA) 1800 mm |
1 x | 100 mm rods + T patellas set for direction control |
1 x | USB Mini Camera endoscope |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
3 x | Beech dowels 3.0 x 1000 mm |
1 x | Propeller POWER-PROP 15x8 |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | "M" set |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Rubber profile 6-2 mm 2M |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Propeller MENZ-S 20x12 3 blades |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | 22x10 BIELA pusher propeller |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Small pinned hinge (12 uds) |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Vest clothes Hispano Aviación |
2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
3 x | Connector CAN 15 |
1 x | Flap hinge (6 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | 21x12D BIELA propeller (3-blades) |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Windsock Ozone L -1200 mm |
1 x | 30 cm BEC cable (male) |
1 x | PIN Connector female (100 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Heat Seal Iron |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Strut Set ASPIRE (without wheels) |
1 x | Servo HITEC HS-485 HB |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
2 x | Conector JR Servo male (10 pcs) |
1 x | Field folding model stand |
1 x | Cylynder DLE 20-RA |
1 x | Horn 5/10 with M2 Bearing |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Propeller MENZ-S 16x10 3-Blades |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Propeller MENZ-S 19x8 |
1 x | 100x50 mm SLH KOVO wheel |
3 x | Aluminium servo arm (2 uds) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Aluminium ignition bad (red) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | 65 mm mini servo cover |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | 90x75 mm standart servo cover |
1 x | Towing hook |
2 x | Balsa panel 3.0x100x1000 mm |
1 x | Blind nut M6 (4 pcs) |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | 42,0 mm propeller (left propeller) |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | 35 mm gas motor standoff |
1 x | Parachute PV6 for F3J |
1 x | Gear for MICRO BB |
2 x | Extinguisher CO2 - 2 Kg |
3 x | Propeller POWER-PROP 14x10 |
1 x | Propeller MENZ-S 16x10 |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Paramotor Trike XL |
1 x | Rubber profile 10-2 mm 2M |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Propeller MENZ-S 17x6 |
1 x | Propeller MENZ-S 16x6 |
1 x | Rescue 1,8m2 / BackPack |
2 x | Vacuum pump P1-N |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Short ball link M2 (6 uds) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Motor Moki S 400 cc 5 cylinders |
3 x | Balsa panel 1.5x100x1000 mm |
3 x | 6x4 tree blades propeller |
1 x | Wing OXY 0,5 pulgadas2 |
3 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Servo HITEC HS-325 BB |
2 x | Vacuum pump 12 CFM |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 26x12D BIELA 3Bl propeller (3-blades) |
2 x | Servo TOPMODEL DS1413 T |
1 x | Tail wheel for 5-8 kg models |
1 x | 18 mm reinforced hinge |
2 x | Frontal Adapter for AXI53xx |
1 x | 40x22D BIELA propeller |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | TrainerCord (master-learner) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
3 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
2 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Piston DLE 55/111/22 |
1 x | Gear set HITEC HS-56 HB |
1 x | Solarfilm Lite blue transp. 5m |
1 x | 5 mm M2 variable inclined horn |
2 x | Pine wood slat 2.0x10.0x1000 mm |
3 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Heli blades angle measurer |
1 x | CC 03 |
2 x | Balsa panel 2.0x100x1000 mm |
2 x | MPX Sub-D Adaptor |
1 x | Dean-T Plug Mold |
2 x | Propeller MENZ-S 21x10 3-Blades |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | JETImodel SINGLE BEC |
1 x | Gear set HITEC HS-85 |
1 x | Bags de Luxe ASPIRE |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | 5 mm Prop Adapter M8 |
1 x | Dremel PERMAGRIT thin lime |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | 5 LiPo XH>EH adapter |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Male connector for 20 pines AWG |
2 x | Remote electric ignition system |
2 x | 32x18D BIELA propeller |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | SE Ring 330 mm (4 pcs) |
2 x | Propeller MENZ-S 18x8 |
1 x | Propeller electric carbon 10x7 |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
2 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Propeller POWER-PROP 14x8 |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Spikes Band (5 m) |
1 x | Large flex hinge (12 uds) |
1 x | Strut Set HAWKER HUNTER 1:5,8 (without wheels) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Blind nut M4 (4 pcs) |
1 x | Gold antispark 4 mm plug |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Ball link M3 (10 pcs) |
1 x | Nitroverdu 500 ml |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Tank gas KUZA 500 cc |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | 100g Flux Paste for Silver Solder |
1 x | 29x20D BIELA propeller |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Super DECATHLON Red 2.450mm |
1 x | 15 mm gas motor standoff |
2 x | Long ball link M3 (6 uds) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Silicone black 1,0 qmm wire (100 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Baseplate servo |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Wing OXY 5,0 m2 |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Pilot "Adolf" Legends Series (Slimline) |
3 x | One touch canopy lock |
4 x | 1/6 Pilot "Garry" |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Propeller MENZ-S 15x12 |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | 20x200 mm battery rings |
1 x | DINO Glider ARC |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Crimping tool |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Short ball link M3 (6 uds) |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
2 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Silicone red 0,5 qmm wire ( 25 m) |
1 x | Propeller electric carbon 9.5x7 |
1 x | 17x10 BIELA propeller (3-blades) |
3 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | 1/12 Pilot "Langley" |
1 x | Propeller MENZ-S 17x10 |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Rudder 2_Tray 3.5~4 inch |
2 x | Servo MKS HV6130 |
1 x | 1/12 Pilot "Tom" |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Ball link M3 RPA's-UAV's |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | FunCup XL RR |
2 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
2 x | Servo TOPMODEL S7520 MG |
2 x | Parachute expulsion foam |
2 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
2 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | 1/10 Pilot "Jimmy" |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | AX-60 starters (5 pcs) |
1 x | 18x8 BIELA propeller |
2 x | 8 mm Adapter for AXI53xx |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Propeller MENZ-S 20x12 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Small flex hinge (12 uds) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
2 x | Propeller MENZ-S 15x6 3 blades |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Windsock Ozone L - 700 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Servo HITEC HS-45 HB, servo box |
2 x | Servos security connector (2 pcs) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Circlick securite |
2 x | Propeller electric carbon 8.5x7 |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Trike XL motor set (motor+esc+prop) |
2 x | Propeller MENZ-S 20x6 |
1 x | 28x12 BIELA 3Bl Pusher propeller |
1 x | Optical RPM Sensor |
2 x | Digital precision scale up to 2000 g |
1 x | Propeller balancer |
1 x | Sealing Iron Sleeve STD |
1 x | Propeller Pleg Glass-Fiber white 15x9.5 |
2 x | Propeller MENZ-S 16x8 3-Blades |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | SAVOX SH 0254 servo |
1 x | 280 cc gasoline fuel tank complet |
1 x | |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Compact on-board starting system (9724) |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | Small pinned hinge (6 uds) |
1 x | ODYSSEY Blue FANTASY ARF 2190 mm |
2 x | Propeller POWER-PROP 11x9 |
1 x | XH female balance (2S) connector (2 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 50 mm gas motor standoff |
2 x | Futaba F14 Twin Boat Stick |
1 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Servo TOPMODEL DS9010 T |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
2 x | White smoke canister 140 g |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Cinta Goldfix 1m |
2 x | Lite Plywood panel 600x300x2.0 mm |
2 x | Hot Glue Stick GREEN |
2 x | 250 mm / 16 mm Airbrakes |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Profile ABS half cane 7.0x1000 mm |
2 x | Piloto Jet "Green" 1/6 Scale |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Ball link M3 (6 uds) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Propeller MENZ-S 17x8 |
2 x | 58 mm micro servo cover |
1 x | Propeller electric carbon 8.5x6 |
1 x | 5 mm M2 variable horn |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | MAX pilot ARTF |
1 x | Conector JR Servo female (10 pcs) |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | 25 mm gas motor standoff |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
2 x | Propeller MENZ-S 20x10 3 blades |
1 x | Propeller electric carbon 10x8 |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | 25 mm reinforced hinge |
2 x | Conector FUTABA Servo female (10 pcs) |
1 x | 10 mm Prop Adapter M12 |
1 x | Red smoke canister 140 g |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Connectors MPX black female |
1 x | 6 mm Prop Adapter M8 |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Miss ULTIMATE 50E Red/Black |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
2 x | Fast attachment for servos (25 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | 16x10 BIELA propeller (3-blades) |
2 x | M3 Maxi ball link (2 uds) |
2 x | Connectors banna oro 2 mm (M/F) |
1 x | Quicklock washer 4 mm (10 pcs) |
2 x | Electric rocket starters (6 pcs) |
1 x | 110x55 mm SLH KOVO wheel |
1 x | Horn mando long (2 pcs) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | 6 mm M3 variable horn |
1 x | Servo HITEC HS-311 |
2 x | Propeller MENZ-S 15x10 |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | 2 LiPo XH>EH adapter |
1 x | Adjustable brass horn threaded M3 |
1 x | Ferrita con funda |
1 x | CC 02 |
1 x | Manual Controller |
1 x | 32x22D BIELA propeller |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Oils Pumps Empty (1 liter) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 30 cm BEC cable (female) |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
3 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
2 x | Propeller MENZ-S 20x9 |
1 x | Brake disc Electron Retracts |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Connector Sub-D 2+5 Female |
2 x | Propeller POWER-PROP 16x8 |
1 x | Propeller electric carbon 6.5x4 |
1 x | LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG |
1 x | Horn mando small (2 pcs) |
1 x | Propeller POWER-PROP 9x6 |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
3 x | Cockpit plastic closing |
2 x | Propeller POWER-PROP 12x9 |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
2 x | 1/6 Pilot "Tony" |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 45 mm gas motor standoff |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Male connector for 16 pines AWG |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | 20x10 BIELA propeller (3-blades) |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | USB HLS prog. interface |
1 x | Release film 100 cm x 50 m |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | DYNAMOMETER S-1580 |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Propeller 9x4,7 SlowFlyer |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | 1000 cc gasoline fuel tank complet |
2 x | Blind nut M6 (4 pcs) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Marker ties (20 pcs) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Miss ULTIMATE 50E Yellow/Black |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | 30 cm MULTIPLEX female connector |
1 x | Screw-lock connector M2 (2 uds) |
3 x | Propeller MENZ-S 20x8 |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Propeller POWER-PROP 11x6 |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | ODYSSEY Yellow FANTASY ARF 2190 mm |
2 x | Long ball link M2 (6 uds) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Micro clevis (10 uds) |
2 x | 8x6 tree blades propeller |
1 x | Horn DUBRO 1/2A |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Servo HITEC HS-5084 MG |
1 x | Servo HITEC HS-225 MG |
1 x | Yellow smoke canister 140 g |
1 x | Fixed launching hook |
1 x | 3 mm Prop Adapter M6 |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Motor A40-14 L 14-Pole V4 |
2 x | 90x60 mm standart servo cover |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Propeller POWER-PROP 16x10 |
1 x | Kit repair carburator DLE-170 |
2 x | Propeller MENZ-S 21x8 |
1 x | Servo HITEC HS-125 MG |
1 x | Propeller electric carbon 6x5 |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
2 x | Balsa panel 5.0x100x1000 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Heli blades angle measurer |
2 x | Conector JR Servo male (10 pcs) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Captador RCEXL para DA |
1 x | RX cabel |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Sensor Ignition RCEXL Universal |
1 x | Robart Door Hinge (Pk2) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Cable video GoPro and 5V cable |
1 x | Sparkplug ROSSI R8 |
1 x | LiPo Storage Box Type "P" |
1 x | EME 55 cc carburetor WALBRO |
1 x | Extension Arm for Carburetor |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | RX external cable for estandar receivers |
1 x | Cable video GoPro |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Extension Arm for Carburetor (red) |
2 x | Carburator Moki S 180 |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Universal Colour Paste deep black 50 g |
1 x | Motor Mega AC 16/25/02 |
1 x | Cockpit metalic closing |
1 x | Motor Mega AC 16/25/01E 3.17mm |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Motor Mega AC 16/07/03 |
1 x | Interface Realflight Simulator |
1 x | Motor Mega AC 16/15/08 |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Motor Mega AC 16/15/03 |
1 x | MASTER 16x10 tree blades propeller |
1 x | Motor Mega AC 16/10/03 RACE |
2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Motor Mega AC 22/20/03 |
2 x | EasyFLY Addon |
1 x | Propeller MASTER 7x3 |
2 x | Spray YELLOW Inca Lexan 150ml |
1 x | Motor Mega AC 16/07/08 |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | Motor Mega AC 22/30/02 |
1 x | Propeller MASTER 7x4 |
1 x | ODYSSEY Navy ARF 2190 mm |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Slave-cable USB Easy Sim |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Motor Mega AC 16/35/01 |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Motor Mega AC 16/07/04 |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Propeller MASTER 6x4 |
1 x | Motor Mega AC 22/35 4S |
2 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Motor Mega AC 16/20/02 |
1 x | Propeller MASTER 7x5 |
2 x | 12x6 tree blades propeller |
1 x | Mega Motor RC 400 F5J 1950KV |
1 x | Motor Mega AC 16/15/02 |
2 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Propeller MASTER 6x3 |
2 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Motor Mega AC 16/15/07 |
2 x | Control for forward wheel (MINI) |
1 x | Motor Mega AC 16/25/03 |
1 x | Propeller MASTER 5,5x4,5 |
1 x | Motor Mega AC 16/07/12 |
1 x | Motor Mega AC 16/15/04 COMBAT |
1 x | Cockpit aluminium closing 5.4g |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Refueling kit for Cap "Red" |
1 x | Switch Cap M (silver) |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Servo MKS HBL599 SL |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
2 x | Carbon plate 700x550x0.5 mm |
2 x | Carbon plate 350x150x2.5 mm |
1 x | Refueling Cup V2 Blue |
2 x | Fiberglass plate 350x150x3.0 mm |
1 x | Switch Cap M (blue) |
3 x | 20x15 Falcon electric V2 |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Servo MKS HV747 |
1 x | Landing gear Rocket 400 |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Fuel Fittings-Red |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
2 x | Fiberglass plate 350x150x4.0 mm |
1 x | Neck strap Double V2 |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Servo MKS HV 777A+ |
1 x | Servo MKS 6100 DS |
1 x | TX-Tray V1 (L) (Red) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Servo MKS HBL380 |
1 x | T- Fittings red color (2pcs) |
1 x | Servo MKS HV69 |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Propeller CFK 17x18 |
2 x | Pilot "Goose" (Slimline) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Moki Carburetor Throttle Arm with Extension |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | Propeller CFK 15x16 |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Pilot "Anthony" (Slimline) |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
1 x | Motor MOKI S 350 cc 7 cylinder |
1 x | 40 mm air cylinder |
1 x | Propeller RF CFK 13x7 |
2 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Drilling-template set for Moki engines Moki S150, S180, S215, S2 |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Propeller RF CFK 10x17 |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Motor MOKI S 250 cc 7-cylindrer |
1 x | Propeller CFK 12.5x6.5 |
1 x | Moki Exhaust Bend 200 mm |
1 x | Motor Moki S 300 cc 5 cylinders |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Flange gasket MOKI carburetor |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller CFK 15x13 |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | JETI Counter for DC-16 (Blue) |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
1 x | Bag JETI Duplex |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Motor Saito FG-90 R3, 90 cc |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Futaba Prop Module F14 |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | 15x7 tree blades propeller LEFT |
1 x | FUTABA T10 J T-FHSS |
1 x | 5 mm Prop Adapter M8 |
1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Propeller POWER-PROP 14x9 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Q-12 2000 mm Electric |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Gracia (Top Model) |
1 x | Brake for 140 mm wheels |
1 x | Dumper propeller 6/8 mm |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Propeller POWER-PROP 13x9 |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Glases Flitemaster |
1 x | Ball link M2,5 (10 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Pushrod octagone 4/3 |
2 x | Propeller MENZ-S 15x8 |
1 x | Lock nut M6 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Propeller MENZ-S 16x12 |
1 x | Propeller MENZ-S 18x6 |
1 x | Propeller MENZ-S 19x10 |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | ESC ALPHA 60A HV |
1 x | Nut for mounting M3 (4 pcs) |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | USBCOM 5i |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | CC 11 Conector |
2 x | Propeller MENZ-S 19x12 |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Threaded insert M5 (10 pcs) |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Bandera Frankr 4x6 |
1 x | Lock nut M5 (10 pcs) |
1 x | Lock nut M5 (20 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | 75 mm |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Nut for mounting M3 (10 pcs) |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | HBC 10035-3 32-Bit |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Liferaft 47 mm |
1 x | Blind nut M5 (4 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | La Capitania di Venetia accesories |
2 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Tx JETI Duplex DC-24 II Carbon Line Gray |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | AXI 2808/24 V2 Long |
1 x | AXI 2814/12 V2 Long |
1 x | Propeller MENZ-S 23x10 |
1 x | Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple" |
1 x | AXI 2814/20 V2 Long |
1 x | AXI 2217/20 V2 |
1 x | AXI 2826/8 V2 |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | Propeller MENZ-S 24x12 |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Propeller Pleg CAM Carbon 12.5x9 |
3 x | Carbon plate 350x150x1.5 mm |
1 x | AXI 2814/20 V2 |
1 x | AXI 2217/12 V2 |
1 x | Transmitter JETI Duplex DS-12 EX Multimod RED |
1 x | 50x45 mm micro-mini servo cover |
1 x | Propeller MENZ-S 32x18 |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | PHASOR RACE 2035/4100 1D |
1 x | Propeller MENZ-S 24x12 3 blades |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | AXI 2217/16 V2 |
1 x | AXI 2820/14 V2 |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | AXI 2808/20 V2 |
1 x | Transmitter JETI Duplex DS-12 SE Carbon RED |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Propeller MENZ-S 23x10 3-Blades |
1 x | Propeller MENZ-S 32x12 |
1 x | AXI 2814/10 V2 |
1 x | Propeller MENZ-S 24x10 3 blades |
1 x | Propeller MENZ-S 26x12 |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Propeller MENZ-S 22x12 3 blades |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | Propeller MENZ-S 22x10 3 blades |
1 x | JETI handheld transmitter DS-14 II Green Multimode |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | AXI 2820/12 V2 Long |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Motor holder AXI |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Prop Saver for AXI 22xx/xx |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | AXI 2826/6 V2 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller Pleg CAM Carbon 12x10 |
1 x | Propeller Pleg CAM Carbon 13x10 |
1 x | Propeller MENZ-S 26x8 |
1 x | Ventral support for AX-18/AX-60 |
1 x | Propeller MENZ-S 28x10 |
1 x | Propeller MENZ-S 32x14 |
1 x | Propeller MENZ-S 26x10 |
1 x | 18 mm wing servo holder |
1 x | Propeller Pleg CAM Carbon 16x10 |
1 x | Propeller MENZ-S 30x12 |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Blue smoke canister 100 g |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
1 x | Propeller MENZ-S 26x12 3 blades |
1 x | AXI 2826/6 V2 Long |
1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
1 x | Propeller Pleg CAM Carbon 11x7 |
1 x | AXI 2814/10 V2 Long |
1 x | Propeller MENZ-S 30x10 |
1 x | Propeller MENZ-S 29x10 |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Propeller Pleg CAM Carbon 15x13 |
2 x | Propeller MENZ-S 28x12 |
1 x | Transmitter JETI Duplex DC-16 II YELLOW Carbon Line Mod.2 |
1 x | Prop Holder AXI 41xx V2 |
1 x | AXI 2808/16 V2 Long |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Propeller MENZ-S 22x8 |
1 x | Conector JR Servo male (50 pcs) |
1 x | Servo DITEX TD2612S |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | AXI Cooler 41xx |
1 x | Conector XT-30 (hembra) |
1 x | Conector XT-30 (macho) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | AXI 2217/16 V2 Long |
1 x | AXI 2820/8 V2 Long |
1 x | Propeller Pleg CAM Carbon 14x9 |
1 x | Propeller MENZ-S 28x8 |
1 x | Propeller MENZ-S 22x12 |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Propeller MENZ-S 34x10 |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Transmitter JETI Duplex DS-12 EX Special Edition |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
1 x | JETI transmitter DC-14 II Red Multimode |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Propeller Pleg CAM Carbon 10x5 |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | JETI handheld transmitter DS-14 II Blue Multimode |
1 x | Propeller MENZ-S 28x14 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Propeller MENZ-S 24x10 |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | AXI 2212/12 V2 |
1 x | Propeller MENZ-S 28x16 |
1 x | Propeller Pleg CAM Carbon 10x7 |
1 x | AXI 2820/8 V2 |
1 x | AXI 2212/20 V2 |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Release wax 250ml |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Propeller pad and output shaft EME 55/60 cc |
1 x | Motor EME 70 cc |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | CDI EME 120cc |
1 x | Piñon motor autostarter 35cc |
1 x | Motor EME 60 cc |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Motor EME 35 cc |
1 x | Lead with adhesive (2 pcs) |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | |
1 x | Piñon motor autostarter 60cc |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Propeller hub EME 60cc |
1 x | One Way bearing for EME35 starkit with key |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | EME ignition free wheel |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | Propeller APC 12x3.8 SF |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | Compact on-board starting system (9713) |
1 x | Insulator ZG 20 |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Tail support (2 pcs) |
1 x | Propeller MENZ-S 18x12 |
1 x | Canopy BULL MØ1 2.600mm |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Servo HITEC HS-75BB Retract |
1 x | BALSA trip 10x10x1000 mm |
1 x | X-RAY Micro QR (Elevator) |
1 x | Screw M4x20 (10 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | wire tensioner (red) |
1 x | Cable coupler M2 (10 uds) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | Crack TURBO Beaver Blue |
1 x | METEOR 1.000 mm kit |
1 x | Hopper 125 ml XICOY |
1 x | Propeller Pleg CAM Carbon 9x6 |
1 x | bavarianDEMON USB cable |
1 x | Propeller APC 4.75x4.75 |
1 x | Female connector for 12 pines AWG |
1 x | 40 mm gas motor standoff |
![](images/pixel_black.gif) |
256,068.71EUR |