1 x | Blind nut M4 (4 pcs) |
3 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
2 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | 12 mm floating pad (49 pcs) |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
4 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
2 x | Blind nut M5 (4 pcs) |
3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
3 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
2 x | Blind nut M3 (4 pcs) |
1 x | ABS angle 4,0x4,0x1000 mm |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Blind nut M2 (10 pcs) |
2 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | Profile ABS half cane 2.5x1000 mm |
2 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Aluminium wide washer M3 red (4 pcs) |
2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
3 x | Blind nut M6 (4 pcs) |
3 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Profile ABS half cane 5.0x1000 mm |
2 x | 10 mm floating pad (72 pcs) |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Couple M4 for wire (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Silent-blocks DLE 170M |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Motor DLE 200cc Std |
2 x | Small Crow DLE-170M |
1 x | Motor DLE 170 M- Paramotors |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Tube Pitot to PIXHAWK |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | 2,5x60 mm allen screwdriver |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | AX-60 starters (5 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Hobbylite Filler, Balsa colour |
1 x | M3 Maxi ball link (2 uds) |
1 x | Lock nut M5 (10 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Support FUEL DOT V3 |
1 x | Motor mount M |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
3 x | Threaded insert M4 (4 pcs) |
2 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Gasket electric Fuel Pump |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Tank gas KUZA 260 cc |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Starter EM Gear Power 250 |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | RCEXL Electronic ignition twin A-02 |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Aluminium ignition bad (red) |
1 x | Starter EM Gear Power 80 |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Recess mount-rem. glow plug set |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Bag connector 2 mm |
2 x | Circlick securite |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
3 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Motor A2212/13T |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Circlick securite |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | XH male balance (2S) connector (2 pcs) |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Conector XT-30 (hembra) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
2 x | XH male balance (7S) connector (2 pcs) |
2 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | XT-90 connector (pair) |
1 x | Connectors MPX black male |
2 x | PIN Connector female (100 pcs) |
1 x | Servo Connector Brackets (10 pcs) |
1 x | Contacto macho pin conector (10 pcs) |
1 x | MR30 connector female |
1 x | Big Crow DLE-170M |
1 x | Motor DLE 430 cc - Paramotors |
1 x | MPX Support |
1 x | Conector MR-60 (pareja) |
3 x | Servo M2x5/16 screw (4 pcs) |
2 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
2 x | Ball Bearings for motor A60-V2 |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
2 x | Gearbox KPG27/28 4,7:1pinion |
2 x | Grasa 2 ml |
1 x | 30 cm MULTIPLEX female connector |
2 x | Socket Head Screw M2x8 |
2 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Threaded insert M5 (10 pcs) |
2 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
2 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | DLA 116 crankshaft |
2 x | Blocking screws M6 gas engine |
3 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Propeller diller for DLE170 |
2 x | Propadapter for motor A50-V3 |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Filler Gauges |
2 x | Actuador lineal HLS12-100210-7.4v |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Gearbox KPG27 5,2:1 |
2 x | Gearbox KPG25 4,2:1 |
1 x | Gearbox KPG25- 5,2:1pinion |
1 x | Gearbox KPG25 5,2:1 |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | 5 line servos wire black (1 m) |
1 x | Dean "T" - Futaba Adapter |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | PowerBox Smokepump |
1 x | Adapter lead MPX/EC3 |
1 x | Conector JR Servo male (50 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Double side nipple |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | 1/12 Pilot "Tom" |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Glases Flitemaster |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Cable Cargador FUTABA |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Futaba male 40 cm extension |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | 550 cc gasoline fuel tank complet |
1 x | double Fuel Dot V2 (silver) |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 1/10 Pilot "Jimmy" |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | 6 mm Prop Adapter M8 |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | 30 cm BEC cable (female) |
1 x | 2 mm Prop Adapter M6 |
1 x | Aero-Master Wings (Aero-naut) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M8 |
2 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Extension 5 lipos JST - JST/C |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Protector Connector MPX (1 pair) |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Futaba Female 40 cm extension |
1 x | Extension 6 lipos XH > EH |
1 x | Interruptor RX/Batterie |
1 x | 2 LiPo XH>EH adapter |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Neck strap JETI DC |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Car Charger DC/DS-16 |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | JETImodel SINGLE BEC |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | Neck strap JETI DS |
1 x | DSM 10 Dual Switch Mixer |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
2 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Propeller 12x6 Falcon electric |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | RM-130FSI 4-stroke inline gasoline airplane 3 cylinder |
1 x | KIRA 480-38 5,2:1 |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | KIRA 480-31 5,2:1 |
1 x | Adapter SPEED 480 |
1 x | KIRA 400-34 |
1 x | Socket Head Screw M2x12 |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Propadapter for motor A60-V2 |
1 x | 20 g tin paste |
1 x | DLE 85 Ignition unit |
1 x | Servo HITEC HS-5087 MH |
1 x | Hub DLE 30 |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Servo HITEC HS-325 BB |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Ball bearing 6003 DLE |
1 x | Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D |
1 x | Servo HITEC D954 TW |
1 x | Valvoline SynPower 2T, 1 Litre |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
1 x | Motor Moki 100 BVT |
1 x | Captador OS GT 33 cc |
1 x | L ELBOW 90º ø 25 mm |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | KIRA 480-38 |
1 x | KIRA 600-16 |
1 x | BEC extension JIVE |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Threaded insert M6 (10 pcs) |
2 x | Socket Screw M3x9 mm |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Hub propeller DLE 111 V3/120 |
1 x | Gasket, insulator ZG 20 |
1 x | DLE 55 RA pipe plug |
1 x | DLE 55 Ignition unit |
1 x | GASKET SET FOR DLE40 |
1 x | CILINDER FOR DLE 55RA |
1 x | Ignition for ZG motors |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Crankcase Gasket set for ZG 74 / ZG 80 |
1 x | Cylinder ZG 26SC/SLH |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | DLE 55 Muffler |
1 x | 180° TUBE-ANGLE Ø 25 mm |
1 x | Moki Exhaust Bend 50VT |
1 x | Collector screw DA |
1 x | Cylinder-piston Assembly 30cc |
1 x | Adapter SPEED 480 whit axle short |
1 x | Motor DA 50-R |
1 x | Ball bearing middle DA-50/DA60/VM120B2 |
1 x | ESC 40A. Opto starter Kolm |
1 x | Motor EME 70 cc |
1 x | Exhaust gasket DA-35 and DA-70 |
1 x | Canister combo DLE 111 cc |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | KIRA 500-26 6,7:1 |
1 x | Motor GAUI F-50R (rear intake) |
1 x | KIRA 600-17 |
1 x | KIRA 600-24 6,7:1 |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | Cinta Goldfix 1m |
1 x | KIRA 600-20 |
1 x | KIRA 600-20 6,7:1 |
1 x | KONDOR 15-92 |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Propadapter for motor A50 |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B |
1 x | Ball bearing 6203 DLE |
1 x | Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260 |
1 x | Servo HITEC D145 SW |
1 x | Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R |
1 x | Cilinder joint for G230RC/G260RC |
1 x | DLE 111 pipe plug |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | CILINDER FOR DLE55, DLE111, DLE222 |
1 x | DA-50 Carburator |
1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
1 x | Servo HITEC D131 MW nano |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Gasket set DLE-20 |
1 x | Header ZG 45/62, "normal" |
1 x | Ignition for ZG 20/26 |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | Gasket carb - intake manifold for ZG 74B/ZG 80G |
1 x | Servo HITEC D951 TW |
1 x | Servo HITEC HS-53 |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-45 HB |
1 x | Insulator block ZG 38/S/SC |
1 x | Servo HITEC D645 MW |
1 x | |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Carburettor Intake Bend for ZG38 |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Gasket set DLE-55 |
1 x | DLE 111 Old Crankshaft keyway |
1 x | Servo HITEC D941 TW |
1 x | Servo HITEC HS-225 BB |
1 x | Insulator ZG 20 |
1 x | Servo HITEC HS-485 HB |
1 x | Gasket cylinder / insulator for ZG 38/S/SC |
1 x | Servo HITEC HS-125 MG |
1 x | Header ZG 45/62, "wide" |
1 x | DLE Ignition 111/120/170 |
1 x | Ball bearing 6002 DLE |
1 x | |
1 x | Receptor MINIMA 6S HITEC |
1 x | Servo HITEC D85 MG |
1 x | Canister combo DLE 120 cc |
1 x | HITEC DPC-11 programmer |
1 x | DLE Ignition 170M |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | Canister combo DLE 55 cc |
1 x | Carburator Moki S400 |
1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
1 x | Smoke Oil Blue 5 l |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Motor Moki S 300 cc 5 cylinders |
1 x | Stainless Steel Bend D 28x0,6mm |
1 x | 90° TUBE-ANGLE Ø 25 mm |
1 x | Tacometer mini ignition RCEXL |
1 x | Castrol Oil TTS 1l |
1 x | Motor MOKI S 350 cc 7 cylinder |
1 x | Carburator Moki S250 |
1 x | Motor Saito FG-14, 13,47 cc |
1 x | Ball Bearing Oil 25 ml |
1 x | O-ring Saito FG-73 5cyl |
1 x | Motor Moki S 250 cc 5 cyl with autostarter |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | Canister combo DLE 120 cc |
1 x | Pitts Muffler for D.A. 100 |
1 x | Motor MOKI S 250 cc 7-cylindrer |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | 90° TUBE-ANGLE Ø 28 mm |
1 x | Escape Krumscheid 81-6 hasta 55 cc |
1 x | Motor Saito FG-100 TS, 100 cc |
1 x | MOKI S250 Intake Bend |
1 x | Motor Saito FG-73 R5, 72.7 cc |
1 x | Pitts Muffler kit for CAP 21 |
1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | Motor Saito FG-36, 36 cc |
1 x | Air Intake manifold 90° - Large |
1 x | Motor SAITO FG-61 TS |
1 x | MVVS presuritation conection 26-175 cc |
1 x | Motor DLE 85 cc |
1 x | Rear bearing for motor 35/40 cc |
1 x | Aluminium-Plate, carb>reed valve carrier, DA-85 DA-100L and DA-1 |
1 x | Spark Plug BRISK M14x1.25 |
1 x | Adapter FUN 400/480 |
1 x | Motor DLE 30 cc V2 |
1 x | Carburetor diaphragm set DA-150/170 |
1 x | Cotter MVVS 45/50/58 cc |
1 x | Motor DLE 65 cc |
1 x | Cylinder for DA-60 and DA-120 |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Flex-headers for Valach VM 85B2-FS |
|
65,763.36EUR |